Likewise, How much does it cost to repair a lamp?

The cost of lamp repair is between $30 to $100, depending on the complexity of the problem. Prices to repair a lamp vary widely, due to the many styles and ages of lamps.

Also, Is it legal to do electrical work yourself?

DIY (do it yourself) electrical work is dangerous and illegal. You may think you can save money by installing an electrical appliance yourself. But, doing electrical work yourself can: put you, your household or tenants at risk of injury or death.

Moreover, Do you need an electrician to change a ballast?

Yes. As a matter of fact, you do need a lock out tag out device in place for changing a ballast. … ‘An electrician is replacing the ballast on a fluorescent light. The electrician uses the light switch on the wall to de-energize the florescent light.

Can I change a plug socket myself?

If you’re renovating your house and want a more refined look in your home, you’d be surprised how different your home looks when you’ve changed up the plug sockets. It’s a simple job to DIY because it’s using an existing fitting, so it’s within the powers of a beginner DIYer, as long as you’re super safety-conscious.

Can you fix a broken lamp?

If you have a lamp with a loose socket that causes the lamp to flicker, to be difficult to turn on, or to just flat out refuse to light, you can replace the socket and give the lamp a new life.

Why would a lamp stop working?

If your lamp does not illuminate, then a faulty bulb, a faulty power outlet, a faulty switch, a faulty light socket, a faulty plug, a faulty brass tab, or a faulty cord may be the issue. You will need to troubleshoot the issue to fix the lamp. See below for a step-by-step guide to fix your lamp.

Do you need an electrician to replace outlets?

Do I need a circuit installed to add an outlet? For most modern homes, you should be able to use the existing circuits when you install a new outlet, often by splicing the wire into the new plug installation. To be sure (and safe), you should always contact an electrician first.

What electrical work can I do myself?

Replacements, Minor Repairs and ‘Like for Like’ Changes –

These are the main electrical jobs that you’ll be allowed to undertake yourself. So, you might want to change and/or move sockets, ceiling lights or light switches. You can even look to change any wires that might look old or damaged.

Does insurance cover DIY electrical?

Although most homeowners policies cover electrical wiring through dwelling insurance, there are cases where coverage may not apply. … When homes have old electrical wiring types like knob and tube or aluminum wiring, insurance companies may deny coverage.

Is it easy to change a ballast?

A typical ballast will generally last about 20 years, but cold environments and bad bulbs can decrease this lifespan significantly. You can get a new ballast at a hardware store or home center and install it in about 10 minutes.

How much does it cost to change a ballast?

The average cost of ballast replacement is $150 for materials and labor. Materials cost an average of $27.50, and labor costs at least $100 to install a ballast replacement. Homeowners often spend $35 per ballast for programmed-start ballast installation and labor.

How do you know when to replace a ballast?

2. Look for warning signs that the ballast is failing.

1. Buzzing. If you hear a strange sound coming from your bulbs or light fixture, like a buzzing or humming noise, that’s often a sign your ballast is going. …
2. Dimming or flickering. …
3. No lights at all. …
4. Changing colors. …
5. Swollen casing. …
6. Burn marks. …
7. Water damage. …
8. Leaking oil.

How hard is it to change an electrical outlet?

Changing an outlet is not difficult, but it’s imperative that you follow certain steps to remain safe. … Unscrew the electrical outlet and pull it forward from the electrical box to expose the wiring: Do not cut the wires. Pull it forward with the wires still attached.

How long does it take to change a plug socket?

It can take around 1-2 hours to install a new plug socket.

Can I change a light fitting myself?

Repairs you can do yourself

If you are competent with DIY works around the house you can perform the following electrical projects: Replace a simple light fitting. Replace light switches. … Repair loose wiring in plugs, switches, or light fittings.

What is the safest way to fix a broken lamp?

First, make sure the light switch is turned off. Use gloves, eye protection and a pair of pliers to break away any remaining glass. Cut the potato in half, firmly press it against the socket and begin twisting counter-clockwise. The potato should grip the base of the bulb and turn it while the socket remains still.

How do you fix a broken lamp shade?

Lampshades aren’t difficult to repair.

1. Vacuum the lamp shade with a soft brush attachment to remove all dust and dirt.
2. Pour a small amount of white glue onto a paper plate.
3. Remove old tape around the top or bottom ring of a shade if it has become damaged, stained or is no longer in good shape.

How do I reset my touch lamp?

How to Reset a Touch Lamp

1. Remove the finial holding the shade onto your touch lamp. …
2. Move the touch lamp to a work surface. …
3. Look inside the lamp for the touch-control box. …
4. Wrap a piece of tape around the lamp wire that connects to the black wire from the touch control.

How do you troubleshoot a touch lamp?

How to Troubleshoot a Touch Lamp

1. Inspect your touch lamp’s lamp cord for damage. …
2. Unplug the touch lamp from the outlet. …
3. Plug the touch lamp into a working outlet. …
4. Check the bulb for a damaged filament. …
5. Unplug the touch lamp and remove the light bulb if it still doesn’t work. …
6. Remove the light bulb and unplug the lamp.

How much do electricians charge per outlet?

Each receptacle unit will cost between $3 and $50 depending on the type you need. The price of hiring an electrician will range from $40 to $100 per hour depending on the pro you choose.

How hard is it to install a new outlet?

Adding outlets in your home isn‘t particularly difficult. It just takes a little effort and basic knowledge of how to add that outlet. The electrical end of the task is very simple; it is running the wire that is the difficult part of the job. … Wire was then run to a second new box for this light.

Can I rewire my house myself?

It is allowed for you to rewire your own house as long as the job can be checked as you go. Most electricans will not agree to these terms as they want to do the whole job.

Can I change a consumer unit myself?

You can replace your consumer unit without disconnecting the power as long as you’re careful. Also, if you want or need to replace the meter tails to the consumer unit, you must involve the electricity board who will wire them into the sealed meter for you.

The post Do I need an electrician to change LED lights? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, How much does it cost to rewire a lamp?

The cost to repair lamps varies depending on the components and the type of lamp. Most single socket table lamps cost around $16 to $20.00 for full rewiring. Each lamp is different, so the cost may differ.

Also, Why does my 3 way lamp switch not work?

With a 3-way bulb, if it isn’t working at all, it’s probably dead. … If both elements don’t come on there, replace the bulb. If you have a 3-way bulb that works as it should in a good 3-way socket, and only one of the two elements works in a different socket, the problem is with the socket.

Moreover, Why is my lamp not working?

If your lamp does not illuminate, then a faulty bulb, a faulty power outlet, a faulty switch, a faulty light socket, a faulty plug, a faulty brass tab, or a faulty cord may be the issue. You will need to troubleshoot the issue to fix the lamp. See below for a step-by-step guide to fix your lamp.

Can I rewire a lamp myself?

You can rewire a lamp easily by yourself. The process is simple and requires you to cut the old cord from the root and replace it with a new one. The replacement process shouldn’t take long.

Should you rewire an old lamp?

Depending on the age of the lamp, you may have to bring in new wires too. This is because different bulbs may have different wiring systems and if the existing system does not perfectly fit in then you will have to rewire your antique lamp as well. Electrical faults do and can occur at any given time.

Can a lamp be rewired?

Remove the socket from its base, cut the old cord and pull it out. Feed the cord up through the threaded tube in the lamp’s body (Photo 2). Then connect the new cord to the socket. Most cords come with the ends already stripped, so you won’t even need a wire stripper for this how to rewire a lamp project.

Can you change a lamp to a 3 way lamp?

But the fact is, you can make practically any lamp into a three-way lamp simply by changing a socket. It’s simple. … Finally, replace the socket cover, reattach the shade bracket, screw in the bulb and replace the shade. Plug the lamp back in and now you’ve got lighting for just about any mood or occasion.

Why do 3 way bulbs burn out so quickly?

Habitually loose connections, either at the socket or with the wire connections, can burn out the bulb quickly, as well as cause flickering. These loose connections increase the electrical resistance and the heat passing through the filament of the bulb, which can shorten its life.

How do I reset my touch lamp?

How to Reset a Touch Lamp

1. Remove the finial holding the shade onto your touch lamp. …
2. Move the touch lamp to a work surface. …
3. Look inside the lamp for the touch-control box. …
4. Wrap a piece of tape around the lamp wire that connects to the black wire from the touch control.

Why do touch lamps stop working?

If the new lamp or appliance fails to work, the outlet may have failed or the circuit breaker tripped. Plug the touch lamp into a working outlet. If the lamp fails to light, unplug the lamp and remove the light bulb. … If this tab does not come into contact with the bottom of the light bulb, the lamp will not work.

Does it matter which wire goes where on a lamp?

If you wonder why you have to identify and connect the hot and neutral wires correctly in a lamp, read on. True, the lamp will usually work either way. But the issue is safety. Normally, power (voltage) comes through the tab on the socket base.

How do I know if my old lamp is safe?

Look at the plug.

1. Non-polarized plug with scotch tape.
2. Non-polarized plug without insulated cover.
3. non polarized plug made from rubber.

What happens if you reverse hot and neutral wires?

This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. Any $5 electrical tester will alert you to this condition, assuming you have a properly grounded three-prong outlet.

Is it OK to leave lamps on all night?

Low wattage LED bulbs are safe to leave on all night without the risk of overheating or fire. … You’ll also want to ensure there is proper space between the bulb and the shade. If they are touching, you may want to get a different size shade. Lastly, never drape fabric or paper over a lamp.

How can you tell how old a lamp cord is?

In an electric lamp, the cord often reveals the clue to the lamp’s age, unless the cord has been replaced. Inspect the cord; if it looks old, the lamp probably is as well. The metal prongs on the plug are likely the same size, rather than one end that is larger than the other.

How do you fix a cut cord on a lamp?

Cut, Separate & Strip the Wires

1. Cut the chewed section and plug off the cord using a wire cutter.
2. Separate the wires by pulling them apart about one to two inches down.
3. Strip about one inch off the ends of the two wires using a wire stripper.
4. Twist the ends of the wires so they are tight and no longer frayed.

How do you make a 3-way lamp?

Instructions for upgrading a regular lamp to a 3-way lamp

1. Unplug the lamp.
2. Remove the lamp shade, light bulb and light harp. …
3. Remove existing outer shell of the lamp socket and the insulating sleeve (cardboard). …
4. Unscrew the wires. …
5. Once the screws have been loosened disconnect the two wires and remember where they go.

What is a three way switch?

A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.

Why do my LED lights burn out so fast?

The most common reasons for LED blowing out are high voltage, bad contacts, use of incompatible dimmer switch, or recessed lighting. Other causes include overheating due to not using the right fixtures, or simply a bad batch of lightbulbs!

Can a burned out light bulb cause a fire?

The reason a burnt-out bulb cannot present a fire hazard is that it cannot consume electricity because the filament in the bulb is no longer intact. This is the main reason why it is safer to leave a burnt-out light bulb in place than to leave a light bulb socket empty.

Can LED lights cause a fire?

LED lights do not emit light from a vacuum as most other bulb types do. … Overheating is one of the reasons a bulb could start a fire, but that is highly unlikely to happen with LED lights. They may feel hot to touch, but they produce light at a significantly lower temperature than other bulbs.

How do I fix my touch lamp sensor?

You can do it by following these steps.

1. Troubleshoot the problem. …
2. Unplug the touch lamp, and pry off the bottom with a butter knife. …
3. Replace the touch sensor located at the base of the lamp. …
4. Check any fuses inside the lamp. …
5. Install a new power control transistor, called a thyristor or TRIAC.

Why did my touch lamp turn on by itself?

RE: Touch lamp turning on by itself at night???

The control is very sensitive and susceptible to all kinds of misoperations. Any type of RFI, such as cell phones, cordless phones, and computers can cause these things to come on and off. They are also a rich source of RFI in and of themselves.

Do touch lamps wear out?

Replacing old lamps with touch lamps mean less fumbling for switches and more time relaxing. Eventually, you may run into a problem with your touch lamp. If it’s not turning on, it could be an electric problem, a damaged cord, a burnt out bulb or a worn out sensor. Touch lamp sensors do wear out after a period of use.

The post What is the safest way to fix a broken lamp? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, How can you tell if a lamp is 3 way?

The way to tell if a lamp is 3-way is that there is an extra contact in the form of a metal tab at the bottom that lines up with an extra contact area on a 3-way bulb. Regular lamps only have two contacts inside the socket, one at the bottom and the other the threaded shell wher you screw your bulb.

Also, Can any lamp use a 3-way bulb?

A 3-way lamp, also known as a tri-light, is a lamp that uses a 3-way light bulb to produce three levels of light in a low-medium-high configuration. A 3-way lamp requires a 3-way bulb and socket, and a 3-way switch.
…
3-way, 2-circuit switches.

Moreover, Why does my 3 way lamp switch not work?

With a 3-way bulb, if it isn’t working at all, it’s probably dead. … If both elements don’t come on there, replace the bulb. If you have a 3-way bulb that works as it should in a good 3-way socket, and only one of the two elements works in a different socket, the problem is with the socket.

Why do lamps have 2 clicks?

Three-stage lamps are compatible with regular light bulbs. … So, when you screw it on a three-way lamp, there has to be a way to translate the three levels to one. Therefore, the lamp skips the first level—low or high depending on the design—and turns on the light when you set it to medium, hence the two clicks.

What are three ways lamp controls?

A 3-way switch is one that allows you to control a ceiling light (or other electrical fixture) from two separate locations. Common scenarios would be 3-way switches located at both the top and bottom of a stairway, or having 3-way switches next to doors in a room with two entry points.

What is a three-way switch?

A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.

Why are 3 way LED bulbs so expensive?

For some reason, the three-way bulbs seem to be more expensive than the infinitely dimmable bulbs. Standard (incandescent) 3-way bulbs have two separate circuits (with separate filaments). One filament is the “low” one, the other is the “medium” one, and they both get turned on in the “high” setting.

Can you use a 100 watt bulb in a 150 watt lamp?

A 100-watt bulb will draw more power through the wires than they safely can handle. (It is okay, however, to put a bulb with lower wattage in that fixture—drawing less than the wire’s maximum load isn’t a problem.) Some specialty lamps or other fixtures may have even lower watt ratings for other safety reasons.

Why do 3 way bulbs burn out so fast?

Habitually loose connections, either at the socket or with the wire connections, can burn out the bulb quickly, as well as cause flickering. These loose connections increase the electrical resistance and the heat passing through the filament of the bulb, which can shorten its life.

Why does my lamp not work?

If your lamp does not illuminate, then a faulty bulb, a faulty power outlet, a faulty switch, a faulty light socket, a faulty plug, a faulty brass tab, or a faulty cord may be the issue. You will need to troubleshoot the issue to fix the lamp. See below for a step-by-step guide to fix your lamp.

Can you fix a lamp switch?

You can fix a lamp switch easily. Every lamp switch either comes loose at some point during its lifetime or simply wears out. Fortunately, not only is fixing a lamp switch easy, but all you need are a few simple tools and possibly an inexpensive replacement switch as well.

Why do 3 way bulbs burn out so quickly?

Habitually loose connections, either at the socket or with the wire connections, can burn out the bulb quickly, as well as cause flickering. These loose connections increase the electrical resistance and the heat passing through the filament of the bulb, which can shorten its life.

Why does my lamp click?

LED bulbs have circuits at the base of the bulb. … This is because, in cheap LED bulbs, the voltage may not be completely turned off even when the dimmer is dialed down to zero. So physically, the dimmer is still on, providing ever little voltage but not enough, and this results in a clicking noise.

What is a 2 way lamp?

A two way light switch is a switch that can be used in conjunction with another two way light switch to turn a light (or lights) on and off from more than one location.

How do you turn a light switch into a lamp?

How to Make a Plug in Lamp Turn on Using a Light Switch

1. Locate the power outlet that the light switch controls. …
2. Put the light switch in the room into the “Off” position.
3. Plug the lamp into the power outlet that is controlled by the light switch. …
4. Flip the light switch into the “On” position, then turn the lamp on.

How do you know if the lamp is busted or not?

The trick is to shake the bulb lightly once the bulb has cooled off completely. If you hear something rattling around, the filament has broken, and you know the bulb has burnt out or is otherwise damaged. Low wattage bulbs may produce a very unpleasant smell if they have burnt out.

What is the common wire in a 3 way switch?

Black wire: This is a hot wire that carries electricity from the power source to the first switch in a typical 3-way setup. It’s also called the “common wire” or the “line wire.” Unless the breaker is off, this black wire is always hot.

What color wire goes to the black screw on a 3-way switch?

The black wire from the circuit breaker panel gets attached to the black screw on the 3-way switch. The black and red wires from the white cable running between the switches get connected to either of the two brass screws on the switch.

What is the common wire in a 3-way switch?

Black wire: This is a hot wire that carries electricity from the power source to the first switch in a typical 3-way setup. It’s also called the “common wire” or the “line wire.” Unless the breaker is off, this black wire is always hot.

What is the difference between a 2 way switch and a 3-way switch?

Both 2 Way and 3 Way switches are SPDT switches. But 3 Way switches have an extra pin called ‘Grounding pin’, which is not present on 2-way switches. 2 Way Switches have 3 screws, whereas 3 Way Switches have 4 screws. But irrespective of that, in both cases, you can employ 2 switches to control the load.

What happens if you put a non-dimmable LED bulb in a dimmer?

If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.

Do dimmable LED bulbs work in touch lamps?

Lighting consultant Terry McGowan said that if a touch lamp has a mechanical switch, it will work with any CFL or LED bulb. However, if the lamp has an electronic switch, you’ll need to use a CFL or LED bulb that’s specially marked as dimmable. Even then you may have some problems, he said.

Can you put a dimmable bulb in any lamp?

You can use a dimmable LED lamp in a non-dimmable circuit. You should NOT use a non-dimmable lamp in a dimmable circuit as it may cause damage to the lamp and or circuit. Integral lamps are clearly marked as dimmable or non-dimmable on the packaging and on the lamp.

The post What are the three parts of lamp? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, What is the glass around a light called?

mantle. noun. a glass cover that you put over a flame to make a bright light.

Also, How can you tell if a lamp is 3 way?

The way to tell if a lamp is 3-way is that there is an extra contact in the form of a metal tab at the bottom that lines up with an extra contact area on a 3-way bulb. Regular lamps only have two contacts inside the socket, one at the bottom and the other the threaded shell wher you screw your bulb.

Moreover, Can any lamp use a 3-way bulb?

A 3-way lamp, also known as a tri-light, is a lamp that uses a 3-way light bulb to produce three levels of light in a low-medium-high configuration. A 3-way lamp requires a 3-way bulb and socket, and a 3-way switch.
…
3-way, 2-circuit switches.

Why does my 3 way lamp switch not work?

With a 3-way bulb, if it isn’t working at all, it’s probably dead. … If both elements don’t come on there, replace the bulb. If you have a 3-way bulb that works as it should in a good 3-way socket, and only one of the two elements works in a different socket, the problem is with the socket.

What are the two types of light?

There are two basic types of light sources: Incandescence and Luminescence.

What do you call a light fitting?

A light fixture (US English), light fitting (UK English), or luminaire is an electrical device containing an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.

Why do lamps have 2 clicks?

Three-stage lamps are compatible with regular light bulbs. … So, when you screw it on a three-way lamp, there has to be a way to translate the three levels to one. Therefore, the lamp skips the first level—low or high depending on the design—and turns on the light when you set it to medium, hence the two clicks.

What are three ways lamp controls?

A 3-way switch is one that allows you to control a ceiling light (or other electrical fixture) from two separate locations. Common scenarios would be 3-way switches located at both the top and bottom of a stairway, or having 3-way switches next to doors in a room with two entry points.

What is a three-way switch?

A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.

Why are 3 way LED bulbs so expensive?

For some reason, the three-way bulbs seem to be more expensive than the infinitely dimmable bulbs. Standard (incandescent) 3-way bulbs have two separate circuits (with separate filaments). One filament is the “low” one, the other is the “medium” one, and they both get turned on in the “high” setting.

Can you use a 100 watt bulb in a 150 watt lamp?

A 100-watt bulb will draw more power through the wires than they safely can handle. (It is okay, however, to put a bulb with lower wattage in that fixture—drawing less than the wire’s maximum load isn’t a problem.) Some specialty lamps or other fixtures may have even lower watt ratings for other safety reasons.

Why do 3 way bulbs burn out so fast?

Habitually loose connections, either at the socket or with the wire connections, can burn out the bulb quickly, as well as cause flickering. These loose connections increase the electrical resistance and the heat passing through the filament of the bulb, which can shorten its life.

Why does my lamp not work?

If your lamp does not illuminate, then a faulty bulb, a faulty power outlet, a faulty switch, a faulty light socket, a faulty plug, a faulty brass tab, or a faulty cord may be the issue. You will need to troubleshoot the issue to fix the lamp. See below for a step-by-step guide to fix your lamp.

Can you fix a lamp switch?

You can fix a lamp switch easily. Every lamp switch either comes loose at some point during its lifetime or simply wears out. Fortunately, not only is fixing a lamp switch easy, but all you need are a few simple tools and possibly an inexpensive replacement switch as well.

Why do 3 way bulbs burn out so quickly?

Habitually loose connections, either at the socket or with the wire connections, can burn out the bulb quickly, as well as cause flickering. These loose connections increase the electrical resistance and the heat passing through the filament of the bulb, which can shorten its life.

What are the 4 types of light?

As Sudhakaran mentions in the video, there are four types of light that every aspiring photographer should recognize: hard, soft, specular, and diffused. Differentiating between the four can be tough for the untrained eye.

What are the 5 properties of light?

Properties of light

• Reflection of light.
• Refraction of light.
• Diffraction of light.
• Interference of light.
• Polarization of light.
• Dispersion of light.
• Scattering of light.

What are the 5 sources of light?

Examples of natural sources of light

• Sun.
• Stars.
• Lightning.
• Fireflies.
• Glowworms.
• Jellyfish.
• Angler fish.
• Viperfish.

Can I change bayonet to screw fitting?

A handy lamp socket converter, the B22 – E27 Lamp Socket Converter allows you to convert a B22 bayonet lamp socket into an E27 edison screw fitting without the need for re-wires.

Is B22 a standard bayonet fitting?

B22 bulbs have the classic bayonet base fitting, which features two ‘mounts’ on either side of the bulb. This is also known as a ‘standard’ bayonet fitting and is the most common in the UK. Make sure you don’t get confused with B15 bayonet fittings that are smaller and less common.

What is a small screw in bulb called?

A ‘standard’ ES (Edison screw) bulb is also known as E27, which you might see on some light bulb boxes. … The other most common screw-in bulb for the home is the E14 or SES (Small Edison Screw). This, as you will have correctly guessed has a 14mm diameter screw cap.

Why does my lamp click?

LED bulbs have circuits at the base of the bulb. … This is because, in cheap LED bulbs, the voltage may not be completely turned off even when the dimmer is dialed down to zero. So physically, the dimmer is still on, providing ever little voltage but not enough, and this results in a clicking noise.

What is a 2 way lamp?

A two way light switch is a switch that can be used in conjunction with another two way light switch to turn a light (or lights) on and off from more than one location.

How do you turn a light switch into a lamp?

How to Make a Plug in Lamp Turn on Using a Light Switch

1. Locate the power outlet that the light switch controls. …
2. Put the light switch in the room into the “Off” position.
3. Plug the lamp into the power outlet that is controlled by the light switch. …
4. Flip the light switch into the “On” position, then turn the lamp on.

The post What are the three parts of lamp? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.