Likewise, How do I know if my refrigerator water filter is clogged?

8 Signs Your Refrigerator Water Filter Needs Replacing (& How to…

1. 1) Dispensed Water Tastes Bad. …
2. 2 Ice has an Odd Smell. …
3. 3) Slow Trickle of Dispensed Water. …
4. 4) Ice is Coming Out Small. …
5. 5) Black Specks in Water or Ice. …
6. 6) Water Filter Light Turns On. …
7. 7) Murky Appearance of Water or Ice. …
8. 8) It’s Been More than a Year.

Also, What is the best temp for a refrigerator?

Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.

Moreover, Why is the water from my fridge warm?

If you have changed the refrigerator water filter and water comes out warmer, you may have pushed the refrigerator back too far after replacing the filter and constricted the water line. This can make it so the water reservoir cannot keep up with the cold water demand from the dispenser.

How long does it take for a new fridge to dispense water?

Depending on the model, it can take up to twenty-four (24) hours for the water to properly chill after installation.

Will a Frigidaire refrigerator work without a water filter?

Does a refrigerator work without a water filter? Yes, as long as the bypass plug is installed. The plug replaces the water filter in the water filter housing.

Will my refrigerator dispense water without a filter?

Will refrigerator water dispensers and ice makers work without a water filter? For most refrigerators, the water dispenser and ice maker will work just fine without a water filter, but some do require what’s called a filter bypass to continue working.

What is the correct temperature for a Frigidaire refrigerator?

Frigidaire Refrigerator Temperature Control Problems

Move items out of the way of the vents, which are located on the side of the appliance. Consumer Reports recommends that the refrigerator interior be set at just about 37 degrees Fahrenheit to keep all perishable items at a food-safe temperature.

Is 50 degrees too warm for a refrigerator?

The temperature inside your refrigerator needs to be cold enough to inhibit bacterial growth, and warm enough so the food doesn’t freeze. Refrigerators should be set to 40 degrees F (4 degrees C) or colder. A good temperature range for a refrigerator is between 34-38 degrees F (1-3 degrees C).

What number should my Frigidaire refrigerator be set at 1 9?

If you are not sure what to set it to, then set it somewhere in the middle. If the dial is numbered 1 to 5 set it on 3, if the dial is numbered 1 to 9, then set at 4. USUALLY the higher the number on the temp control dial, the colder the temperature your refrigerator will get.

Why is my fridge not cold?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). … Clean the fan blades and spin the fan by hand to see if it’s stuck. Plug in the fridge and make sure the fan runs when the compressor is running.

Why is my Frigidaire water not cold?

Check to make sure the refrigerator is properly connected to a water supply and that the water supply is turned on. Be sure to prime the water supply system. … Water from the dispenser is not chilled – it will be room temperature without adding ice to your cup/glass.

Is refrigerator water tap water?

They are always full with filtered water, so you don’t have to wait. Unlike all other home filters of tap water, refrigerator filters do their job while you aren’t using them and store the filtered water in a container. This way the water is always ready to drink and you don’t need to wait to get it filtered.

How long does it take to make ice in a new Frigidaire refrigerator?

After the refrigerator is installed and has cooled for several hours, the ice maker can produce ice within 24 hours. The ice maker will fill the ice bin from the rear. You must dispense some ice to force the ice forward in the bin. This will allow the ice bin to fill completely.

How long before new ice maker fills with water?

To be safe, it is best to wait at least 24 hours. If the icemaker was installed but the water line was not added until later, once the water and icemaker is turned on the icemaker will cycle within a few minutes and fill and process its first cubes in about 1 1/2 hours.

How long does it take a new fridge to get cold?

Depending on its make and model, it takes between 3 and 24 hours for a new fridge to cool. To make your fridge cool down faster: Keep it a few inches from the wall. Put ice in the freezer.

What happens if I don’t change my refrigerator water filter?

Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.

Is ice filtered in refrigerators?

If you have a refrigerator with a built-in water dispenser, you most likely already have a workable water filter built in. … Fridge filters continuously generate ice cubes made from filtered water as well.

Do you really need to replace refrigerator air filter?

The general rule is to replace a filter every three months. But it’s a good idea to check a filter at least once a month in case it’s dirty or clogged and needs replacing. Refrigerator water filter: On average, you should replace the filter every six months depending on the water’s quality and how much water you use.

Why does my ice maker works intermittently?

The ice maker is very intermittent in operation. sometimes it works flawlessly and other times it does not work at all. … This can also be due to a frozen water fill tube, a failed water valve or the icemaker itself. The icemaker may need to be lowered, to check the fill tube (see picture).

Will ice maker stop working if filter is dirty?

If the filter is clogged and you are not able to immediately replace it, leave the filter out so the water system is in bypass mode. With the filter removed, the water system will continue to operate, bypassing the filter, and the clogged filter will not cause slow water dispensing or low ice production.

Why does my Frigidaire refrigerator not get cold?

A Frigidaire refrigerator not cooling properly may have a dirty or damaged seal, allowing cold air to escape and warm air to enter. Assess the door seal for dirt and debris or signs of damage like rips or tears.

How do I run a diagnostic on my Frigidaire refrigerator?

How to Enter the Diagnostic Mode on a Frigidaire Refrigerator

1. Press and hold the “Freezer Temperature UP” and the “Freezer Temperature DOWN” buttons at the same time.
2. Release and press the buttons together twice more within five seconds to enter the diagnostic mode to test the Frigidaire.

The post Do Frigidaire refrigerators dispense cold water? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

1. 1) Dispensed Water Tastes Bad. …
2. 2 Ice has an Odd Smell. …
3. 3) Slow Trickle of Dispensed Water. …
4. 4) Ice is Coming Out Small. …
5. 5) Black Specks in Water or Ice. …
6. 6) Water Filter Light Turns On. …
7. 7) Murky Appearance of Water or Ice. …
8. 8) It’s Been More than a Year.

Likewise, How do you increase your water pressure in your house?

A quick and easy way to increase water pressure is to adjust the pressure-reducing valve, which can be found on the main water-supply pipe; look for a conical-shaped valve next to the water meter, close to where the main water pipe enters the house. Protruding from the top of the valve is a threaded bolt.

Also, Will a Frigidaire refrigerator work without a water filter?

Does a refrigerator work without a water filter? Yes, as long as the bypass plug is installed. The plug replaces the water filter in the water filter housing.

Moreover, Will my refrigerator dispense water without a filter?

Will refrigerator water dispensers and ice makers work without a water filter? For most refrigerators, the water dispenser and ice maker will work just fine without a water filter, but some do require what’s called a filter bypass to continue working.

How do I fix low water pressure in my house?

Water Pressure: 5 Ways to Improve Yours

1. Clear the Clogs. Over time, your pipes can develop a buildup of mineral deposits. …
2. Open Wide. The next solution requires little more than a few minutes of investigative work. …
3. Replace the Regulator. …
4. Look Out for Leaks. …
5. Install a Water Pressure Booster Pump.

How can I increase low water pressure in my house?

Pressure-Reducing Valve

1. Look on the main supply pipe near your water meter for a conical valve that has a bolt sticking out of the cone.
2. To raise pressure, turn the bolt clockwise after loosening its locknut. Keep an eye on the gauge to make sure the pressure is within bounds, then retighten the locknut.

Why would water pressure suddenly drop?

If the low water pressure seems restricted to a single faucet or showerhead, the problem isn’t with your pipes or water supply, but with the fixture itself. If it’s a sink, the most common causes are a clogged aerator or clogged cartridge. … These cloudy spots block the flow of water and decrease water pressure.

What happens if I don’t change my refrigerator water filter?

Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.

Is ice filtered in refrigerators?

If you have a refrigerator with a built-in water dispenser, you most likely already have a workable water filter built in. … Fridge filters continuously generate ice cubes made from filtered water as well.

Do you really need to replace refrigerator air filter?

The general rule is to replace a filter every three months. But it’s a good idea to check a filter at least once a month in case it’s dirty or clogged and needs replacing. Refrigerator water filter: On average, you should replace the filter every six months depending on the water’s quality and how much water you use.

Why does my ice maker works intermittently?

The ice maker is very intermittent in operation. sometimes it works flawlessly and other times it does not work at all. … This can also be due to a frozen water fill tube, a failed water valve or the icemaker itself. The icemaker may need to be lowered, to check the fill tube (see picture).

Will ice maker stop working if filter is dirty?

If the filter is clogged and you are not able to immediately replace it, leave the filter out so the water system is in bypass mode. With the filter removed, the water system will continue to operate, bypassing the filter, and the clogged filter will not cause slow water dispensing or low ice production.

How can I boost my shower water pressure?

How to increase water pressure in the shower

1. Clean your shower head.
2. Replace the shower head.
3. Install a shower pump.
4. Installing a pressurised unvented cylinder.
5. Install an electric shower with a cold water accumulator tank.
6. Install a power shower.

Why is water pressure low in neighborhood?

For instance, low water pressure throughout your neighborhood is likely an issue that needs to be dealt with by the government or local utility, while low water pressure at a specific appliance can normally be traced back to a clogged aerator or a leak in the water line running to the appliance.

Why is my shower water pressure low?

Low pressure in a shower can be caused by several issues such as a clogged showerhead, a worn-out mixing valve, closed valve, leaking pipe, or even a faulty water heater.

How can I increase shower pressure?

How to increase water pressure in your shower

1. Clean the shower head. …
2. Check for a flow restrictor. …
3. Check for kinks. …
4. Check that the valve is fully open. …
5. Check for leaks. …
6. Open the water heater shut-off valve. …
7. Flush the water heater. …
8. Buy a low-pressure shower head.

Why does my shower have low water pressure?

Low pressure in a shower can be caused by several issues such as a clogged showerhead, a worn-out mixing valve, closed valve, leaking pipe, or even a faulty water heater.

Why is my shower water pressure low?

Shower low water pressure can be caused by many things ranging from blocked shower heads or accidentally turned shut-off valves to the more serious causes like blocked pipes or a leak somewhere in the line. Low water pressure can also be due to more than one problem.

Why is my kitchen water pressure low?

The most common causes of low water pressure in a kitchen sink are a clogged aerator or a clogged cartridge. … In most cases, that should clear the clog and improve the water pressure. It’s also a good idea, every few months, to tie a gallon bag of white vinegar over the end of the faucet overnight.

How often should I change my Frigidaire refrigerator water filter?

It’s recommended you replace your water filter every six months. Over time, your water filter will collect filtered-out particles and contaminants that will naturally make it less effective.

How long does a refrigerator water filter really last?

How often should you replace your refrigerator water filter? Refrigerator filters should be replaced every 6 months. Never leave a filter in place longer than a year. The longer you use a carbon filter beyond its maximum capacity, the more harmful your water could become.

Do fridge water filters expire?

Do unused water filters expire? … In short, no, unused water filters do not expire. There is no set shelf life for water filters, as long as they’re not exposed to any moisture. That’s the key — moisture is what makes water filters work, and without that, they’re sitting pretty and ready for use at any time.

Is water from refrigerator filtered?

The water filter in your fridge is an important part of the system. It ensures that only clean water is dispensed or used to make ice. The water filter is very effective at keeping fridge water clean, but filters have a limited lifespan.

What is the safest water to drink?

Purified water is usually tap or groundwater which has been treated to remove harmful substances like bacteria, fungi, and parasites. This means that drinking it is pretty much guaranteed to be safe.

Is it bad to drink water from old filter?

Yes, your old filter can add bacteria to your water

This can make you sick if you continue to use the old filter. … Researchers concluded that the filter had a biofilm growing on it, and in some cases the bacteria colony counts in the filtered water was up to 10,000 times those in the tap water.

The post How do I know if my refrigerator water filter is clogged? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, Why is my Frigidaire ice maker so slow?

The top reasons for a slow ice maker inside of a freezer are incorrect temperature setting, too much or too little food inside, and a clogged water line or filter. … Appliance^® are standing by to repair your ice maker.

Also, What is the best temp for a refrigerator?

Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.

Moreover, Why is the water from my fridge warm?

If you have changed the refrigerator water filter and water comes out warmer, you may have pushed the refrigerator back too far after replacing the filter and constricted the water line. This can make it so the water reservoir cannot keep up with the cold water demand from the dispenser.

How long does it take for a new fridge to dispense water?

Depending on the model, it can take up to twenty-four (24) hours for the water to properly chill after installation.

How do you unclog a Frigidaire ice maker?

To be sure the control arm is the problem, do a full Frigidaire ice maker reset. Depending on your model, you can perform a hard reset on your ice maker using the control panel. Hold the on/off button until the LED is red. Wait a couple of minutes and then hold the same button until it’s green.

How do I force my Frigidaire ice maker to cycle?

How to Force an Ice Maker to Cycle

1. Open the freezer door to remove the ice bin from below the ice maker.
2. Empty the ice from the bin. …
3. Press the ice maker toggle switch to the “On” setting if it is not already activated.
4. Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.

How do I speed up my Frigidaire ice maker?

Lower the Freezer Temperature: the water in the ice tray freezes quicker, triggering the tray thermostat to warm and release the ice, which starts the process all over again. The circle of life in the ice maker machine! To make your ice maker work faster, simply lower the freezer temperature by 3-5 degrees.

What is the correct temperature for a Frigidaire refrigerator?

Frigidaire Refrigerator Temperature Control Problems

Move items out of the way of the vents, which are located on the side of the appliance. Consumer Reports recommends that the refrigerator interior be set at just about 37 degrees Fahrenheit to keep all perishable items at a food-safe temperature.

Is 50 degrees too warm for a refrigerator?

The temperature inside your refrigerator needs to be cold enough to inhibit bacterial growth, and warm enough so the food doesn’t freeze. Refrigerators should be set to 40 degrees F (4 degrees C) or colder. A good temperature range for a refrigerator is between 34-38 degrees F (1-3 degrees C).

What number should my Frigidaire refrigerator be set at 1 9?

If you are not sure what to set it to, then set it somewhere in the middle. If the dial is numbered 1 to 5 set it on 3, if the dial is numbered 1 to 9, then set at 4. USUALLY the higher the number on the temp control dial, the colder the temperature your refrigerator will get.

Why is my fridge not cold?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). … Clean the fan blades and spin the fan by hand to see if it’s stuck. Plug in the fridge and make sure the fan runs when the compressor is running.

Why is my Frigidaire water not cold?

Check to make sure the refrigerator is properly connected to a water supply and that the water supply is turned on. Be sure to prime the water supply system. … Water from the dispenser is not chilled – it will be room temperature without adding ice to your cup/glass.

Is refrigerator water tap water?

They are always full with filtered water, so you don’t have to wait. Unlike all other home filters of tap water, refrigerator filters do their job while you aren’t using them and store the filtered water in a container. This way the water is always ready to drink and you don’t need to wait to get it filtered.

How long does it take to make ice in a new Frigidaire refrigerator?

After the refrigerator is installed and has cooled for several hours, the ice maker can produce ice within 24 hours. The ice maker will fill the ice bin from the rear. You must dispense some ice to force the ice forward in the bin. This will allow the ice bin to fill completely.

How long before new ice maker fills with water?

To be safe, it is best to wait at least 24 hours. If the icemaker was installed but the water line was not added until later, once the water and icemaker is turned on the icemaker will cycle within a few minutes and fill and process its first cubes in about 1 1/2 hours.

How long does it take a new fridge to get cold?

Depending on its make and model, it takes between 3 and 24 hours for a new fridge to cool. To make your fridge cool down faster: Keep it a few inches from the wall. Put ice in the freezer.

Is there a reset button on a Frigidaire refrigerator?

The reset button on your Frigidaire Freezer is likely on the inside. When you’re resetting your Frigidaire freezer, unplug it from the wall for 15 to 20 minutes and then plug it back in. Next, hold down the alarm reset button for three seconds and then press the down arrow three times and the up arrow once.

How do I reset my Frigidaire ice maker?

I called the company this evening and they told me to reset the unit: 1. Hold/press the power button for 10 seconds; unplug and drain. Wait 30 minutes, plug back in, refill, and see if it works. If it does not work, call them back, they are open 24-hours.

How do I know if my refrigerator water filter is clogged?

8 Signs Your Refrigerator Water Filter Needs Replacing (& How to…

1. 1) Dispensed Water Tastes Bad. …
2. 2 Ice has an Odd Smell. …
3. 3) Slow Trickle of Dispensed Water. …
4. 4) Ice is Coming Out Small. …
5. 5) Black Specks in Water or Ice. …
6. 6) Water Filter Light Turns On. …
7. 7) Murky Appearance of Water or Ice. …
8. 8) It’s Been More than a Year.

Where is the reset button on a Frigidaire ice maker?

The reset button is located on the front of the ice maker, underneath the motor housing, past the front cover. Press and hold the reset button (you’ll need to apply some pressure here) until you hear the ice tray motor begin to torque, then release.

How do I reset my Frigidaire ice maker?

Some Frigidaire refrigerators have an an on/off button for the icemaker located on the front control panel. To reset the icemaker press this switch until the LED turns red, wait a few minutes, then press and hold it until the LED turns green.

How long does it take for a new Frigidaire refrigerator to make ice?

It takes approximately 24 hours for the ice maker to begin producing ice.

The post Do Frigidaire refrigerators dispense cold water? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

1. 1) Dispensed Water Tastes Bad. …
2. 2 Ice has an Odd Smell. …
3. 3) Slow Trickle of Dispensed Water. …
4. 4) Ice is Coming Out Small. …
5. 5) Black Specks in Water or Ice. …
6. 6) Water Filter Light Turns On. …
7. 7) Murky Appearance of Water or Ice. …
8. 8) It’s Been More than a Year.

Likewise, How do I clean my refrigerator water line?

Empty the water from the reservoir that is typically behind the crisper. Vinegar can serve as a good refrigerator water line cleaner. Clean it out with 1 gallon of warm water and 1 cup of vinegar mixed together. Flush water through the water reservoir and finish by flushing with fresh water.

Also, Will a Frigidaire refrigerator work without a water filter?

Does a refrigerator work without a water filter? Yes, as long as the bypass plug is installed. The plug replaces the water filter in the water filter housing.

Moreover, Will my refrigerator dispense water without a filter?

Will refrigerator water dispensers and ice makers work without a water filter? For most refrigerators, the water dispenser and ice maker will work just fine without a water filter, but some do require what’s called a filter bypass to continue working.

How do I test my refrigerator water line?

Where to Find the Refrigerator Water Line Shut-off Valve

1. Hidden in a box or metal guard at the water source.
2. Located near the cold water supply at the bottom of the kitchen sink.
3. In the basement.
4. In a crawl space.
5. In the cabinet next to the refrigerator.

Why is my Frigidaire water dispenser not working?

Make sure the water filter is positioned properly – simply remove and re-install the water filter to double check. The water filter may be clogged or overdue for replacement. If water is dispensing slowly or not at all, or your water filter is older than 6 months – it’s time to replace.

How often should you replace refrigerator water line?

Even if there is no obvious wear, replace hoses every five years. Use a reinforced steel-braided hose, as they are less likely to fail.

What happens if I don’t change my refrigerator water filter?

Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.

Is ice filtered in refrigerators?

If you have a refrigerator with a built-in water dispenser, you most likely already have a workable water filter built in. … Fridge filters continuously generate ice cubes made from filtered water as well.

Do you really need to replace refrigerator air filter?

The general rule is to replace a filter every three months. But it’s a good idea to check a filter at least once a month in case it’s dirty or clogged and needs replacing. Refrigerator water filter: On average, you should replace the filter every six months depending on the water’s quality and how much water you use.

Why does my ice maker works intermittently?

The ice maker is very intermittent in operation. sometimes it works flawlessly and other times it does not work at all. … This can also be due to a frozen water fill tube, a failed water valve or the icemaker itself. The icemaker may need to be lowered, to check the fill tube (see picture).

Will ice maker stop working if filter is dirty?

If the filter is clogged and you are not able to immediately replace it, leave the filter out so the water system is in bypass mode. With the filter removed, the water system will continue to operate, bypassing the filter, and the clogged filter will not cause slow water dispensing or low ice production.

How do I force my Frigidaire ice maker to cycle?

How to Force an Ice Maker to Cycle

1. Open the freezer door to remove the ice bin from below the ice maker.
2. Empty the ice from the bin. …
3. Press the ice maker toggle switch to the “On” setting if it is not already activated.
4. Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.

Can a fridge make ice without a water line?

You don’t need to hook it up if you don’t want ice and water, the fridge will work fine without it. Sorry, there was a problem. … No, you do not have to install the water line. The ice maker itself doesn’t take up too much space in the freezer, so you could just turn it off and pretend it’s not there.

How do I reset my Frigidaire water dispenser?

Press a glass against the water dispenser lever and fill the glass with water. Empty it and repeat for four minutes to flush the system. Turn the ice maker on. Press and hold the “Water Filter” button for three seconds to reset the filter status.

What causes water dispenser to stop working?

Clogged Water Filter

Water filters should be replaced every six months on average. If you can’t remember replacing your water filter, it’s probably time to change it. These filters can get clogged over time causing the water flow to be disrupted and thus, preventing the water dispenser from functioning properly.

Do Frigidaire refrigerators dispense cold water?

What it is: Your Frigidaire refrigerator is designed to keep a few servings of cold water ready to dispense at all times. Well, almost.. It does that by storing the water in a small, chilled water tank. As soon as you press on the dispenser lever, that cold water will flow out and into your cup.

What happens if you don’t change water filter in refrigerator?

Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.

How long does a refrigerator water filter really last?

How often should you replace your refrigerator water filter? Refrigerator filters should be replaced every 6 months. Never leave a filter in place longer than a year. The longer you use a carbon filter beyond its maximum capacity, the more harmful your water could become.

How long do braided supply lines last?

How Long To Use Stainless Steel Braided Hoses. Most stainless steel braided hoses last three to five years, according to the manufacturer. It’s important to replace parts after their time has expired even when there’s nothing apparently wrong with them.

How often should I change my Frigidaire refrigerator water filter?

It’s recommended you replace your water filter every six months. Over time, your water filter will collect filtered-out particles and contaminants that will naturally make it less effective.

Do fridge water filters expire?

Do unused water filters expire? … In short, no, unused water filters do not expire. There is no set shelf life for water filters, as long as they’re not exposed to any moisture. That’s the key — moisture is what makes water filters work, and without that, they’re sitting pretty and ready for use at any time.

Is water from refrigerator filtered?

The water filter in your fridge is an important part of the system. It ensures that only clean water is dispensed or used to make ice. The water filter is very effective at keeping fridge water clean, but filters have a limited lifespan.

What is the safest water to drink?

Purified water is usually tap or groundwater which has been treated to remove harmful substances like bacteria, fungi, and parasites. This means that drinking it is pretty much guaranteed to be safe.

Is it bad to drink water from old filter?

Yes, your old filter can add bacteria to your water

This can make you sick if you continue to use the old filter. … Researchers concluded that the filter had a biofilm growing on it, and in some cases the bacteria colony counts in the filtered water was up to 10,000 times those in the tap water.

The post How do I know if my refrigerator water filter is clogged? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.