similarly, What do you do if your DIRECTV says no signal?

Reset your receiver

Unplug the receiver’s power cord from the electrical outlet. Wait 15 seconds then plug it back in. Press Power on the front panel of your receiver and wait for your receiver to reboot.

on the other hand, Will DIRECTV upgrade my receiver for free?

“Will DIRECTV upgrade my receiver for free?” DIRECTV can be upgraded for our existing customers. Receivers equipment are upgrades for no charge which will be what many of our subscribers want. If you’re not, we’ll match you with any of AT&T’s DIRECTV upgrade deals for already customers.

also, Do I need a DIRECTV receiver for every TV? The Genie, Genie 2, and Genie Minis are all DIRECTV satellite receivers. All you need is one Genie HD DVR and you can record up to 5 shows at once. You can also install up to 8 Genie Minis for full DVR functionality on every TV in your home. Where can I buy DIRECTV equipment?

Why is my DIRECTV receiver not connecting?

Unplug your receiver

Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

Why is my direct TV black?

Problem with Cable connection – Your Directv is most likely to experience a black screen issue due to a cable connection problem. For instance, damaged cables, loose connections, inactive power source. These are some of the possible causes on your TV. … For instance, your DirecTV might be mistakenly set on a wrong input.

How do I get signal on my DirecTV satellite?

To access the Signal Meters menu:

1. Press the menu button on your remote.
2. Select Settings and Help on the left hand menu.
3. Select Settings.
4. Select Satellite on the left hand menu.
5. Select View Signal Strength on the bottom right-hand screen (scroll to it using the arrows on your remote).

Why is my TV suddenly saying no signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

Can I buy a DIRECTV receiver and install it myself?

If you want to do the install yourself, then you must get the receiver from an authorized retailer. Solid Signal has been a good retailer over the years, but of course no company has a perfect track record. However you will not get the equipment free, and it still comes with a 24 month agreement upon activation.

Can I take my DIRECTV receiver to my vacation home?

When you get ready to go to the summer home (or winter home,) just call and have your billing and service address changed. This is perfectly valid and you can do it as many times as you need (if you do it every day or even once a week it might raise a few eyebrows though.)

Can I upgrade my DIRECTV box?

If you are a DIRECTV subscriber and would like to exchange your standard receiver or high-definition receiver to an upgraded HD receiver, you can upgrade your box at any time. Upgraded HD receivers may include more features such as a digital video recorder or additional storage space for your recordings.

Does directv charge for extra receivers?

DIRECTV equipment fees

Unlike most cable providers, DIRECTV doesn’t charge you extra for a DVR. You get the Genie DVR lease and service fee included in your DIRECTV package—no hidden costs here. … If you want to zone out in front of more than one TV, though, it will cost you $7 per month for each additional receiver.

Can I run 2 TVs off 1 directv box?

Using a splitter to watch two TVs with DirecTV satellite. … If you have one receiver, but want to hook up another TV in a different room, you can do so with a splitter and coaxial cable. However, if you are using one receiver for two TVs, both TVs will show the same channel.

How can I get directv in another room without receiver?

How To Watch DirecTV In Another Room Without a Box?

1. First of all, the users need to invest in the two-way splitter as they are designed with two outputs and one input.
2. Next, you must position the coaxial cable into the room on the DirecTV receiver’s input port (it brings signals into the room)

How do I reboot my receiver?

Unplug your receiver

1. Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in.
2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do I reset my DIRECTV remote control?

To reset DIRECTV remotes to their default factory settings, press and hold the MUTE and SELECT buttons until the remote’s light flashes three times. Then, enter 981 and press SELECT. The remote will flash four times to let you know it has been reset.

Why do I have to keep resetting my DIRECTV receiver?

Solution 1: Check your cables

Make sure it’s securely connected. Unplug the other end of your receiver’s power cord that’s plugged into the electrical outlet and plug it back in. … If your receiver is plugged into a power strip, make sure the power strip is on. Press the Power button on the front panel of your receiver.

What input should TV be on for DIRECTV?

Set your TV channel to 3 or 4 with your TV remote (not your DIRECTV remote). These 2 channels receive the DIRECTV service signal. Make sure you select the correct TV input source.

Why does my satellite keep losing signal?

Signal Loss Error Message

This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky.

What DIRECTV satellite do I point to?

In general, start with a southern-pointing direction before testing. The Dish satellites are aligned to the south and will calibrate more easily when pointed in that direction.

How do I fix no signal?

1. Turn off your computer.
2. Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm. …
3. Reattach the cable running from your monitor to your PC. …
4. Replace your monitor with another monitor if possible. …
5. Open your PC case and locate your video card.

Can Wifi interfere with TV signal?

Can WIFI Affect TV Signals? Wireless devices do affect the performance of your TV signals. … Signals often drop due to how close the antenna cable is to the HDMI cable. Keep in mind your router antenna only affects signals if it’s too close.

Does DirecTV work without a box?

DIRECTV has given customers the power to enjoy the whole-home HD DVR experience without the clutter of wires and boxes getting in the way, thanks to the Wireless Genie Mini (WGM). … Current customers with DIRECTV Genie service can upgrade to the wireless device.

How much does it cost to get another DirecTV box?

Understanding the terms of your DIRECTV service

How often should I replace my DirecTV receiver?

Protection for your DIRECTV system plus eligibility for latest receiver upgrade every 2 years.

Don’t forget to share the post !

The post Will DIRECTV replace a bad receiver? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, Why do I keep losing my satellite signal?

This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky. Your signal strength can affect the delivery of your live programming, though with a DVR you can still access recorded content.

on the other hand, How do I reboot my receiver?

Unplug your receiver

1. Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in.
2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

also, How do I refresh my satellite receiver? How to reset your receiver

1. Unplug the power cord from the back of the receiver.
2. Leave it unplugged for 30 seconds, then plug it back in.
3. The receiver should boot up properly in less than 90 seconds, with lights flashing in front.

How do I reset my satellite dish?

Restore Default Settings

1. Press the MENU button twice or the HOME button three times, depending on your remote.
2. Select Receiver.
3. Select Tools.
4. Select RESET TO FACTORY DEFAULTS.
5. Select RESET RECEIVER TO FACTORY DEFAULTS.
6. Select Yes on the Reset Receiver to Defaults pop-up.
7. Your receiver will restart.

How do I test my satellite signal?

How to Test Satellite TV Signal Strength

1. Ensure the satellite dish is connected to the included satellite receiver box. …
2. Connect the satellite receiver box to your television. …
3. Ensure that both the satellite receiver and television are powered on. …
4. Select the “Signal Meter Screen” option from the receiver menu.

Why is my TV suddenly saying no signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

Can I spray Pam on my satellite dish?

Non-stick cooking and waterproofing sprays such as PAM or Rain-X are not recommended for keeping snow and ice off your satellite dish. … Furthermore, these chemicals could damage the surface of the dish. A good rule of thumb is if you wouldn’t spray your TV screen with it, don’t spray your dish with it either.

How do I reset my DIRECTV remote control?

To reset DIRECTV remotes to their default factory settings, press and hold the MUTE and SELECT buttons until the remote’s light flashes three times. Then, enter 981 and press SELECT. The remote will flash four times to let you know it has been reset.

Why do I have to keep resetting my DIRECTV receiver?

Solution 1: Check your cables

Make sure it’s securely connected. Unplug the other end of your receiver’s power cord that’s plugged into the electrical outlet and plug it back in. … If your receiver is plugged into a power strip, make sure the power strip is on. Press the Power button on the front panel of your receiver.

How often should I refresh my directv receiver?

The DIRECTV web site won’t let you refresh a receiver more than once every five minutes, and it will create error flags if you do it more than three times a day. This could lead down the road to a call from DIRECTV support just to make sure everything is ok, and that would end up wasting everyone’s time.

Why is my Bell box not working?

Unplug the power cable on the back of the Fibe TV receiver. Wait 10 seconds. … Wait approximately five minutes for the Fibe TV receiver to restart. Once the Fibe TV receiver has restarted, check to see if your TV picture has returned and the Fibe TV receiver responds to the remote control.

How do I restart my bell receiver?

Reboot your receiver

1. Press and hold-down the green POWER button on the front of your TV receiver for 5 seconds (until the red, green, and blue lights come on).
2. Wait a few minutes for the reboot to take place. …
3. Once the reboot completes, content from the channel that you last viewed appears.

Where is the reset button on DISH receiver?

On the left side of your receiver is a power button. Press and hold the power button for ten seconds then release, your receiver will reset. Some receiver models have a door, press on it and it will fall down, behind this is a power button in the top left corner and reset button in the bottom left corner.

How do I reboot my DISH TV?

1. Press MENU Button.
2. Press Right Arrow Key 3 Time and Go to the MY DISHTV.
3. Press Down Arrow Key 6 Times and Go to TOOLS and Press OK.
4. Press OK on Factory Reset Option and wait for STB Reboot.

How do you fix your TV when it says no signal?

Reset the box

1. Turn everything off at the wall.
2. Check that all cables are securely and firmly in place.
3. Wait for 60 seconds.
4. Plug your TV box (not the television set) in and turn it on.
5. Wait another 60 seconds, or until the lights on the TV box have stopped flashing.
6. Plug everything else back in and turn it all back on.

How do I fix no signal?

1. Turn off your computer.
2. Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm. …
3. Reattach the cable running from your monitor to your PC. …
4. Replace your monitor with another monitor if possible. …
5. Open your PC case and locate your video card.

What do you spray on a satellite dish?

This may sound ridiculous, but several dish installers, as well as Internet posters, recommend applying a can of cooking spray (like Pam) to the dish. The vegetable oil on the dish can help make the face of it slick enough for the snow to fall off.

How can I improve my satellite signal strength?

How to get faster satellite internet today

1. Remove surrounding shrubbery or other obstacles. …
2. Add a satellite in-line amplifier. …
3. Move your satellite dish closer to your home. …
4. Ask your service provider if you need to reposition your satellite dish. …
5. Ask your service provider about switching satellites.

Will a rusty satellite dish still work?

If for whatever reason the round part of the satellite dish is misshapen or bent or very rusty. This can cause the satellite signals to bounce off at different angles than they otherwise would and not be received by the LNB as they should be which can cause poor satellite reception.

How do I resync my directv remote to my receiver?

Make sure your remote is paired with your receiver.

1. Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
2. Press and hold MUTE and ENTER at the same time on your remote.
3. The screen displays Applying IR/RF Setup. The remote is synced.

Why won’t my directv remote change the channel?

If your remote is not responding, changing channels or adjusting the volume, make sure you have direct line of sight to the receiver.. Next, make sure your remote is set to control your DIRECTV receiver: At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol.

Why is my TV not responding to the remote?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

Don’t forget to share the post !

The post Why is my satellite receiver not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

1. Go to myAT&T account overview and select My DIRECTV.
2. Choose Manage Package.
3. Scroll to Manage receivers and elect Refresh receiver.
4. Your DIRECTV service may be interrupted for a few minutes during the refresh process.

similarly, Why is DIRECTV low resolution?

Error 771 on a DIRECTV system means that there has been signal loss on the satellite your receiver is trying to tune to. It’s commonly caused by a broken wire, a dish that’s gone bad, or some sort of obstruction in front of the dish.

on the other hand, Why can’t I get my HD channels on DirecTV?

If there are signals obstructions from the satellite, the HD channels won’t be available. You could try checking the direction of the antenna and make it aligned at the prescribed location. However, if the antenna is in the right direction and position, we suggest talking to DirecTV about this issue.

also, How do I refresh my satellite receiver? How to reset your receiver

1. Unplug the power cord from the back of the receiver.
2. Leave it unplugged for 30 seconds, then plug it back in.
3. The receiver should boot up properly in less than 90 seconds, with lights flashing in front.

What does code 721 mean for DirecTV?

DIRECTV Error Code 721

If you see code 721 – “channel not purchased” it can mean two things: Either that channel is not part of your programming package, or your service just needs to be refreshed. Here you’ll learn how to troubleshoot code 721 without having to call customer service.

Why is my DirecTV 480p?

For this, you need to press the info button and then tap the right arrow towards the Audio/Video option. After it, press the change resolution and format option until you see an icon on the screen saying “1080i + original format.” Pressing the exit button may also work as it will toggle from SD to HD.

What is a good signal strength for DirecTV?

For the more amateur folks, all you need to know is that the signal strength is a number between 0 and 100 where 100 is the best signal you can get. As you see in the screen above, some zeroes are normal. This indicates that a particular transponder isn’t being used in your area. Signal strength in the 90s is great.

Why do I keep losing my satellite signal?

This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky. Your signal strength can affect the delivery of your live programming, though with a DVR you can still access recorded content.

How many channels did DirecTV lose?

— — DirecTV’s 20 million satellite TV subscribers have lost 17 channels produced by Viacom in a dispute about the fees paid to broadcast the media company’s programs.

How do I reboot my receiver?

To reset your receiver:

1. Unplug the receiver’s power cord from the back of the receiver or from the wall outlet.
2. Leave unplugged for 30 seconds and plug back in.
3. The receiver should boot up properly in less than 90 seconds.

How do I reboot my bell receiver?

Reboot your receiver

1. Press and hold-down the green POWER button on the front of your TV receiver for 5 seconds (until the red, green, and blue lights come on).
2. Wait a few minutes for the reboot to take place. …
3. Once the reboot completes, content from the channel that you last viewed appears.

How often should I refresh my directv receiver?

The DIRECTV web site won’t let you refresh a receiver more than once every five minutes, and it will create error flags if you do it more than three times a day. This could lead down the road to a call from DIRECTV support just to make sure everything is ok, and that would end up wasting everyone’s time.

How do I refresh my DIRECTV receiver?

To refresh:

1. Go to myAT&T account overview and select My DIRECTV.
2. Choose Manage Package.
3. Scroll to Manage receivers and elect Refresh receiver.
4. Your DIRECTV service may be interrupted for a few minutes during the refresh process.

How do I fix Error 721 on DIRECTV?

STEP 1: Unplug your receiver’s power cord from the electrical outlet, wait for 15 seconds, and plug it back in. STEP 2: Press the Power button on the front panel of your receiver. Wait for your receiver to reboot. STEP 3: Go to My Equipment to refresh your receiver again.

Why is my DIRECTV remote not changing the channel?

Change the channel using the channel up/down buttons on the receiver. If you can change channels on the receiver, change the batteries in your remote. If you can’t change channels from the receiver, turn it off and unplug it. After at least 15 seconds, plug the receiver back in and turn it on.

Can you tell the difference between 1080i and 1080p?

1080p and 1080i systems are both HD certified and therefore capable of displaying 1920 x 1080 pixel images. The difference between these two resolutions, however, is in the way the images are displayed. … 1080i uses an interlaced display, whereas 1080p features progressive scan display.

Where is the RES button on my directv remote?

Take a look at any DIRECTV HD receiver or DVR and you’ll find this button on the front that says RES. What does that even mean? It’s not the reset button, that’s the red one on the side or hidden behind a door.

How do I get signal on my DirecTV satellite?

To access the Signal Meters menu:

1. Press the menu button on your remote.
2. Select Settings and Help on the left hand menu.
3. Select Settings.
4. Select Satellite on the left hand menu.
5. Select View Signal Strength on the bottom right-hand screen (scroll to it using the arrows on your remote).

How do you test a satellite signal?

How to Test Satellite TV Signal Strength

1. Ensure the satellite dish is connected to the included satellite receiver box. …
2. Connect the satellite receiver box to your television. …
3. Ensure that both the satellite receiver and television are powered on. …
4. Select the “Signal Meter Screen” option from the receiver menu.

Why does my satellite keep losing signal?

Signal Loss Error Message

This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky.

Why is my satellite receiver not working?

To reset your receiver: Unplug the receiver’s power cord from the back of the receiver or from the wall outlet. Leave unplugged for 30 seconds and plug back in. The receiver should boot up properly in less than 90 seconds.

How do I test my satellite signal?

How to Test Satellite TV Signal Strength

1. Ensure the satellite dish is connected to the included satellite receiver box. …
2. Connect the satellite receiver box to your television. …
3. Ensure that both the satellite receiver and television are powered on. …
4. Select the “Signal Meter Screen” option from the receiver menu.

Why is my TV suddenly saying no signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

Don’t forget to share the post !

The post How do I get my DIRECTV hd channels back? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, Why do I keep losing my satellite signal?

This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky. Your signal strength can affect the delivery of your live programming, though with a DVR you can still access recorded content.

on the other hand, Is DirecTV having sound issues?

The cause of the sound issues may be the remote control or audio/visual cables. Press volume up on the remote control. If the volume doesn’t respond, you may need to program the remote control. Learn how to program your remote control.

also, Why does my DirecTV keep losing signal? A phenomenon called “rain fade” is one common cause of DirecTV signal loss. Rain fade happens when atmospheric conditions disrupt communication between DirecTV’s broadcasting network and your home receiver. … Naturally, rain fade affects some regions of the country more than others.

Why is my satellite receiver not working?

To reset your receiver: Unplug the receiver’s power cord from the back of the receiver or from the wall outlet. Leave unplugged for 30 seconds and plug back in. The receiver should boot up properly in less than 90 seconds.

How do I test my satellite signal?

How to Test Satellite TV Signal Strength

1. Ensure the satellite dish is connected to the included satellite receiver box. …
2. Connect the satellite receiver box to your television. …
3. Ensure that both the satellite receiver and television are powered on. …
4. Select the “Signal Meter Screen” option from the receiver menu.

Why is my TV suddenly saying no signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

How do I get my DirecTV remote to work?

Make sure your remote is paired with your receiver.

1. Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
2. Press and hold MUTE and ENTER at the same time on your remote.
3. The screen displays Applying IR/RF Setup. The remote is synced.

Why does my DirecTV keep cutting in and out?

Check that the cable connection is tight to the box. If there are any adapters connected, check those as well. If you have a SWiM Power Inserter, a small power brick like device that includes two cable connections, unplug it from power for 15 minutes. Make sure nothing is blocking your satellite.

Why has my sound stopped working?

Check your volume settings

Once you open the window, click Open Sound Settings. In the Sound Settings window, click Sound Control Panel. Within the Sound Control Panel, open the Playback tab. … If the sound is not working, right click on the default audio device again, this time selecting Properties.

Why do I have to keep resetting my DIRECTV receiver?

Solution 1: Check your cables

Make sure it’s securely connected. Unplug the other end of your receiver’s power cord that’s plugged into the electrical outlet and plug it back in. … If your receiver is plugged into a power strip, make sure the power strip is on. Press the Power button on the front panel of your receiver.

How do I reboot my receiver?

Unplug your receiver

1. Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in.
2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do I refresh my satellite receiver?

How to reset your receiver

1. Unplug the power cord from the back of the receiver.
2. Leave it unplugged for 30 seconds, then plug it back in.
3. The receiver should boot up properly in less than 90 seconds, with lights flashing in front.

How do I reset my satellite dish?

Restore Default Settings

1. Press the MENU button twice or the HOME button three times, depending on your remote.
2. Select Receiver.
3. Select Tools.
4. Select RESET TO FACTORY DEFAULTS.
5. Select RESET RECEIVER TO FACTORY DEFAULTS.
6. Select Yes on the Reset Receiver to Defaults pop-up.
7. Your receiver will restart.

Does a dirty satellite dish affect reception?

dirty dish may boost curb appeal, but it will likely have little impact on your signal quality. Snow and ice accumulations are another story, however, and may require more attention.

How do you fix your TV when it says no signal?

Reset the box

1. Turn everything off at the wall.
2. Check that all cables are securely and firmly in place.
3. Wait for 60 seconds.
4. Plug your TV box (not the television set) in and turn it on.
5. Wait another 60 seconds, or until the lights on the TV box have stopped flashing.
6. Plug everything else back in and turn it all back on.

How do I fix no signal?

1. Turn off your computer.
2. Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm. …
3. Reattach the cable running from your monitor to your PC. …
4. Replace your monitor with another monitor if possible. …
5. Open your PC case and locate your video card.

Why won’t my directv remote change the channel?

If your remote is not responding, changing channels or adjusting the volume, make sure you have direct line of sight to the receiver.. Next, make sure your remote is set to control your DIRECTV receiver: At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol.

Why is my TV not responding to the remote?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

What is the code for directv remote?

On your remote, press and hold the MUTE and SELECT buttons until the green light at the top blinks twice. Enter the manufacturer’s code for your TV: – For Samsung DIRECTV Ready TVs, enter 54000. – For Sony DIRECTV Ready TVs, enter 54001.

Why does my DIRECTV receiver turn on by itself?

The obstructions usually occur when something is blocking the signals from the satellite. With this being said, if the data is not settled in perfectly even after six hours, the receiver will turn on by itself (rebooting, actually).

Why is my DIRECTV box blinking orange?

If you are using DirecTV Genie Mini wireless and facing a flashing orange light on it, this means your wireless video bridge is not connected with the device. To make it workable, reset the wireless video bridge, and reboot the DirecTV device. After resetting, you will have an intense blue light on your device.

Why is my laptop’s sound not working?

In rare instances, a hardware incompatibility, software update, or Windows reinstallation can cause your sound to stop working, and you may need to tweak something in the BIOS. … If that doesn’t help, check what BIOS or UEFI version you’re using, and compare it to the latest version on your laptop manufacturer’s website.

What to do if sound is not coming from mobile?

How to Fix It When the Speaker Is Not Working on Your Android Device

1. Turn on the speaker. …
2. Turn up the in-call volume. …
3. Adjust the app sound settings. …
4. Check the media volume. …
5. Make sure Do Not Disturb isn’t enabled. …
6. Make sure your headphones aren’t plugged in. …
7. Remove your phone from its case. …
8. Reboot your device.

Why is my iPhone’s sound not working?

Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don’t hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service. Contact Apple Support for iPhone, iPad, or iPod touch.

Don’t forget to share the post !

The post What’s wrong with DirecTV satellite? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.