similarly, Can a sink drain go straight down?

In a sense, all drains go through the floor. You cannot have a code-approved sink drain going down, unless you have a vent going up.

on the other hand, Will plumbers putty stop leaks?

Plumber’s putty seals the parts to prevent leaks. A common location for leaks, and thus putty, is around toilets and drains. Putty also helps seal the drains for sinks and tubs.

also, Do you have to put plumbers putty on sink drain? The plumber’s putty must always be applied at the bottom of the sink and the sink must be placed with all the pressure on the countertop. Tips for using plumber’s putty. Even though the putty is better than the silicone and caulk in several situations, the plumber’s putty cannot stand as a solution in all areas.

Why can’t you use plumbers putty on plastic?

The putty can attack the chrome plating on the plastic drain and cause it to come off. Usually, plastic drains have a “foam” or rubber gasket to place under the drain “flange” so you do not have to use any sealant.

Can a p-trap be higher than the drain pipe?

It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times. But essentially anything below already creates its own p-trap- so using another is redundant.

Can you put a 90 in a sink drain?

It’s fine to have a larger-radius (sweep) 90-degree bend at the base of a vertical drainage stack where the wastewater starts to travel horizontally. It’s also a good idea to have a sweep 90-degree fitting where a drain pipe pops out of a wall for a kitchen, vanity or laundry sink.

Why is s trap illegal?

Back to “S” traps – The reason “S” traps aren’t allowed is because they have the potential to suck, or ‘siphon’, water out of the trap as the water flows down the drain. … Believe it or not, enough water to break the water seal at the trap and let sewer gases come in to the house.

What is the best sealant for leaking pipes?

The following list looks at the best pipe thread sealant for a number of applications.

• BEST OVERALL: Gasoila – SS16 Soft-Set Pipe Thread Sealant with PTFE.
• BEST BANG FOR THE BUCK: Dixon Valve TTB75 PTFE Industrial Sealant Tape.
• BEST FOR WATER: Oatey 31230 Pipe Joint Compound with PTFE with Brush.

How do I temporarily fix a leaking pipe?

How To Temporarily Patch A Leaky Pipe While You Wait For A Professional

1. Apply A Water Pipe Epoxy. …
2. Use Pipe Wraps. …
3. Take Advantage of Pipe Clamps. …
4. Utilize Rubber Pipe Connectors. …
5. Invest In Some Plumbing Repair Tape. …
6. Implement Repair Sleeves.

What can I substitute for plumbers putty?

A clay-like substance called plumber’s putty is the most popular choice for sealing sink drains, but you can also use silicone caulk.

• Most Popular: Plumber’s Putty.
• Plumber’s Putty Installation.
• Alternative: Silicone Caulk.
• Silicone Caulk Installation.

Can you use too much plumbers putty?

It is normal for excess putty to ooze out when you tighten the fixture. How much depends on “how too much you applied to the basket strainer assembly. If you apply way too much and do not get it tight hot water will wash it out. If you apply the right amount and tighten it enough it won’t wash out in 20 years.

What can be used instead of plumbers putty?

If you do not have plumber’s putty or cannot use it on your type of sink, then you can use silicone or even the foam or rubber gasket that comes with some pop-up assemblies. Fit the drain or fixture into its appropriate place, and this will ensure a watertight fit and limit the chances of having a leak.

Can you use sealant instead of putty?

Old, dry putty can be softened with bleach and linseed oil. Either acrylic latex/silicone caulk or window putty, also known as glazing putty, are commonly used for this purpose. … Both types will work, but one has proven its superiority with the test of time.

How far below drain should p-trap be?

However, the Universal Plumbing Code stipulates that the total developed length of all tailpieces, arms and fittings connecting the drain to the p-trap must be 24 inches or less.

What can I use instead of p-trap?

Recently I discovered the amazing Hep_vO Waterless Valve. It’s a new solution to this old problem. Using a flexible silicon tube inside that seals out air but allows water to flow in one direction, it performs the same task without using any water and without being large and bulky like a p-trap.

Does p-trap have to be directly below shower drain?

If you install TWO “P” traps the shower will NOT drain. The “P” trap SHOULD be directly under the drain, but no more than a few inches off center of it, if conditions require it. NO trap, TWO traps, and/or a 9 foot offset are NOT allowed and if he suggests any of them get a different installer who is a REAL plumber.

How many turns can a drain pipe have?

According to plumbing code, drain pipe has to be sloped a minimum of 1/4-inch per foot and a maximum of three inches per foot or vertical. A slope of less than 1/4-inch per foot will cause constant drain clogs and a slope of more than three inches will allow the water to drain without the solids.

How far below drain should P trap be?

However, the Universal Plumbing Code stipulates that the total developed length of all tailpieces, arms and fittings connecting the drain to the p-trap must be 24 inches or less.

Can plumbing vent pipes have 90 degree angles?

Vent pipes, often narrower than drainpipes, need not slope like drainpipes. … Vent pipes must be installed so they stay dry. This means that they should emerge from the top of the drainpipe, either straight vertically or at no less than a 45-degree angle from horizontal, so that water cannot back up into them.

Which is better P-trap or S trap?

P-traps are generally considered by most to be more effective and consistent in maintaining water trap compared to S-traps. Their design makes them less vulnerable to drying out and losing seal: a properly installed P-trap will never lose its water seal.

What is the difference between a J bend and a P-trap?

The J-bend beneath the sink is also referred to as the P-trap, the U-bend and sometimes even just the drain trap. … In some cases, however, hand-tightening may not seat the washer correctly, particularly if your drain pipes are metal, so slip-joint pliers will often come in handy.

Do you need 2 P traps for a double sink?

A double bathroom sink installation rarely requires more than one P-trap. The usual practice is to connect the two sinks to a tee and then feed the tee into a single P-trap, which then connects to the drain. The pipes you use to connect the sink to the P-trap are the same type the P-trap is made from.

Don’t forget to share the post !

The post Should I use plumbers putty or silicone? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, How do you dissolve food stuck in drain?

Home Depot suggests a mix of 1 cup of fresh baking soda sprinkled down the drain followed by 1 cup of plain white vinegar. Cover the sink hole with a rubber stopper or plate and allow the mixture to work for about 15 minutes. Remove the drain cover and run hot water down the sink for a few minutes.

on the other hand, Does Coke really unclog drains?

Coke. … Pour a 2-liter bottle of cola — Pepsi, Coke, or generic brand substitutes — down the clogged drain. Coke is actually quite caustic and effective at clearing away buildup in your drains, but it’s far milder than commercial drain cleaners.

also, What is the strongest drain Unblocker? The best kitchen drain unblockers

• Buster Kitchen Plughole Unblocker. …
• Cillit Bang Drain Odour Eliminator & Unblocker Gel. …
• Domestos 15 Minute Sink & Pipe Unblocker Gel. …
• Ecozone Kitchen Drain Unblocker. …
• HG Kitchen Drain Unblocker. …
• Mr Muscle Power Gel Drain Unblocker. …
• Ocado Sink & Drain Unblocker Gel.

Is it OK to pour acid down the drain?

Pouring acid into drains could completely destroy them. Muriatic acid is HYDROCHLORIC ACID. You should not even pour vinegar down your drain it is acidic enough to cause lead oxides to become free lead ions (element Pb), which when consumed accumulate in the body as lead poisoning.

Can Coca Cola unblock drains?

Coke is actually quite caustic and effective at clearing away buildup in your drains, but it’s far milder than commercial drain cleaners. Let it sit and wait at least one hour before turning on the hot water to drain it all away.

What can dissolve rice?

Pour 1/2 to 1 cup baking soda into your garbage disposal and then pour in an equal amount of white vinegar.

How do you unblock a sink naturally?

Follow these easy steps to unclog your drain:

1. Start by pouring a pot of boiling water down the drain.
2. Next, pour a cup of baking soda and 1 cup water/1 cup vinegar solution.
3. Cover with the drain plug and wait 5 to 10 minutes.
4. Pour boiling water down the drain again.

Does vinegar dissolve poop?

Baking soda and vinegar is a marvelous cleaning agent, and when dumped into a clogged toilet, often will break up the clog without you having to do a thing. This is what you want to do: combine two cups hot water with two cups white vinegar.

Can wd40 unclog drains?

Using WD-40:

The good part about using WD-40 is that it gets right under the build-up and muck, and breaks it down, which helps clear the drain. In addition, WD-40 loosens rust-to-metal bonds, so even if there is internal rusting in the pipes, this should resolve that issue as well.

What dissolves hair in a drain?

Combining baking soda and vinegar is a natural way to dissolve hair clogs, without resorting to harsh chemicals. Pour a cup of baking soda down the clogged drain first, and then after a few minutes add a cup of vinegar.

Is Mr muscle drain Unblocker any good?

Mr. Muscle Max Gel Unblocker is one of the best and strongest cleaners on the market and is MZR approved! According to Amazon, this product is rated 4 out of 5 stars from around 100 reviews.

What is the best homemade drain cleaner?

Mix 1/2 cup baking soda with 1/4 cup table salt and pour down the drain giving you trouble. Follow by pouring 1 cup of heated vinegar down the drain (it will foam and bubble). Cover the drain with a plug or duct tape to prevent the mixture from escaping. Let it sit for 15 minutes.

Can baking soda remove clog a drain?

The bubbling reaction from the baking soda and vinegar helps to loosen the drain clog, and the boiling water in step 4 helps remove it from your pipes. Baking soda and vinegar can serve as a natural drain cleaner.

What is the best drain cleaner for cast iron pipes?

Fortunately, Liquid-Plumr^® is safe for all pipe types except rubber, which is present in some fittings. So whether you’ve got to force a hair clog through a 50-year-old set of iron pipes or just get your drain draining faster, Liquid-Plumr^® will always be the right choice for your house’s plumbing.

What’s the best way to unclog your drain?

Pour one cup of baking soda down the drain, using a spatula or spoon to push the powder down the drain if necessary. Pour one cup of white vinegar down the drain opening. Place a stopper or cover on the drain to seal the opening. Let the mixture sit for 15 minutes.

Can you pour muriatic acid down your toilet?

Pour a bucket of water rapidly into the toilet bowl to lower the water level in the bowl. Then add 12 ounces of muriatic acid to the water in the bowl. Allow it to sit in the toilet for several hours. First of all be sure to wear goggles and old clothes as you do this.

Will rubbing alcohol dissolve rice?

Rice can leave sugar deposits on the circuitry. Alcohol won’t, and it won’t bridge any contacts. This is how we did it in the shop… soak it for a hour or so shake well, then pull phone out and let dry for 3 days, worked 90%+ of the time.

Will vinegar dissolve rice?

Rice does not break down well trying to use water and vinegar is not acidic enough to make a difference. In the “olden days” we would have put either a Very Basic (pH level) Solution, like Sodium Hydroxide or a strong Acid, like Sulfuric Acid down the drains to “burn” the Rice out.

How does salt unclog drains?

Using Salt by Itself. Pour salt down the drain. Although the acidity from vinegar helps to eat through grease and other clogs, salt alone will scour the inside of the pipe, since it is so coarse and abrasive. … Then pour it directly down the drain.

Will bleach unblock a sink?

If you are connected to a public sewer system and not to a well or septic tank, you can use bleach to both clean and deodorize a clogged sink. Pour 1 cup (250 ml) of undiluted bleach directly down the sink drain. Let sit for 5 to 10 minutes. Turn your sink on and let water rush into the drain.

How do you unblock a sink fast?

Just pour a small amount of baking soda down the drain, followed by a cup of white vinegar. As the baking soda and vinegar start to work, you will hear a fizzing noise. Leave for a few minutes, and use hot water to wash the mixture down the drain. Another method is to use soda crystals to unblock the sink.

What enzyme breaks down poop?

Proteases break down protein-based soils including blood, urine, food, feces, wine and other beverages.

Why is my poop so heavy it won’t flush?

Extremely large poops may be the outcome of eating a very large meal or the result of chronic constipation that alters your bowel habits. If you’ve tried increasing your physical activity and upping fiber and water intake, and your poops still fill the toilet, it’s time to talk to your doctor.

Why is poop coming back into toilet?

Several plumbing fixtures are clogged at the same time. If your toilets, kitchen sink and tub or shower are all backed up, you probably have a clogged sewer line. … When you flush the toilet, water backs up into or comes up in the tub or shower. When your sewer line is clogged, the water can’t go down the drain.

Don’t forget to share the post !

The post What acid do plumbers use to unclog drains? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, What is the best sealant for leaking pipes?

The following list looks at the best pipe thread sealant for a number of applications.

• BEST OVERALL: Gasoila – SS16 Soft-Set Pipe Thread Sealant with PTFE.
• BEST BANG FOR THE BUCK: Dixon Valve TTB75 PTFE Industrial Sealant Tape.
• BEST FOR WATER: Oatey 31230 Pipe Joint Compound with PTFE with Brush.

on the other hand, When should you not use plumbers putty?

Do not use plumber’s putty where you need adhesive strength (to bond materials or prevent them from moving) or where you need a watertight seal in exposed areas.

also, How do I temporarily fix a leaking pipe? How To Temporarily Patch A Leaky Pipe While You Wait For A Professional

1. Apply A Water Pipe Epoxy. …
2. Use Pipe Wraps. …
3. Take Advantage of Pipe Clamps. …
4. Utilize Rubber Pipe Connectors. …
5. Invest In Some Plumbing Repair Tape. …
6. Implement Repair Sleeves.

Does Flex Seal work on hot water pipes?

A: No, we do not recommend that you use Flex Seal on surfaces where it comes in direct contact with drinking water. Q: Can I use it to fix radiators, tires or other areas with extreme heat and pressure? A: No, Flex Seal is not made to withstand extreme heat or pressure.

Is it better to use silicone or plumbers putty?

Both plumber’s putty and silicone are sealing compounds designed to provide a water tight fit for pop up drains, sink strainers, undersides of fittings, showers and drains. Plumber’s putty is more traditional while silicone caulking is a more modern product, but either one (in most cases) can get the job done.

Can you use too much plumbers putty?

It is normal for excess putty to ooze out when you tighten the fixture. How much depends on “how too much you applied to the basket strainer assembly. If you apply way too much and do not get it tight hot water will wash it out. If you apply the right amount and tighten it enough it won’t wash out in 20 years.

Which is better Teflon tape or plumbers putty?

Teflon tape gives a reliable seal on threaded pipe joints for liquids and gases that may be under considerable pressure. Plumber’s putty acts as a flexible caulk in situations where you need water resistance—but it cannot withstand any significant pressure.

Can you tape a leaking pipe?

Self-fusing silicone tape is also effective as a temporary fix on low pressure lines. It creates a seamless waterproof layer when stretched. Wrap the tape around the pipe, stretching it as you make tight overlapping passes to cover the area of the leak. Use epoxy putty or pipe putty as a temporary fix to a leaky pipe.

Can you fix a broken pipe yourself?

If you have to repair or replace copper plumbing, your job is a bit more difficult than for plastic, and requires more skill. Still, if you are careful, there is no reason why you can’t do it yourself. One of the primary rules in soldering copper pipes is that the pipe and fitting surfaces to be joined must be clean.

Does Flex tape work on leaky pipes?

“Flex tape grips on tight,” said Phil Swift in the Flex Tape commercial. It’s supposed to patch, bond, seal and repair almost any product. Other TV stations have tested it on leaky pipes and it held up. We tried it on a bucket spilling out water and it worked.

Does Flex Seal work on cast iron pipe?

Many people have used Flex Seal liquid on cast iron pipes with great success just make sure it’s not under pressure.

Will Flex Seal stop water leaks?

Flex Tape is completely waterproof! It can cover gushing water from a hole in a bucket, and it can even be used under water to seal a leaking pool.

Why can’t you use plumbers putty on plastic?

The putty can attack the chrome plating on the plastic drain and cause it to come off. Usually, plastic drains have a “foam” or rubber gasket to place under the drain “flange” so you do not have to use any sealant.

Do you need to let plumbers putty dry?

You can start using the sink drain or faucet immediately after installing plumbers putty. There is no drying time because it doesn’t dry. It just seals the gaps and the sink, drain, or faucet which can be used immediately after application of the plumbers putty.

What to do with excess plumbers putty?

Step 3 – Remove Excess

To remove large amounts of dried plumber’s putty, use a hammer and chisel or flathead screwdriver to chip it away. If this process fails, carefully use a razor blade to slice it away. Try to get the blade as close to the surface as you can without scraping it.

Why plumbers putty fail?

Most Popular: Plumber’s Putty

And like clay, the putty dries and hardens after it is out of its container long enough. A seal made with plumber’s putty may fail down the road if the putty becomes brittle and it cracks apart, allowing water to pass through the seal.

Do plumbers use Teflon tape?

PTFE is short for polytetrafluoroethylene, and what makes it so useful is that it’s hydrophobic (water repellant) and has very low friction. This makes PTFE tape a must-have for plumbers and anyone who does pipework jobs, such as irrigation contractors.

What can I substitute for plumbers putty?

A clay-like substance called plumber’s putty is the most popular choice for sealing sink drains, but you can also use silicone caulk.

• Most Popular: Plumber’s Putty.
• Plumber’s Putty Installation.
• Alternative: Silicone Caulk.
• Silicone Caulk Installation.

Should I use plumbers putty on P trap?

That type of p-trap is not meant to be used with plumbers putty or Teflon. If you got it to seal, it was just luck. Nothing should be on the threades. The swivel is a cone that fits into a dish.

Will Gorilla Glue stop a water leak?

Whether a rapid repair or a long term fix, Gorilla has the products to turn your trash into treasure. Gorilla Glue Waterproof Patch and Seal Tape can fix a leaking gutter in a few minutes. Gorilla Waterproof Patch & Seal Tape can instantly seal out water, air & moisture.

Can Teflon tape stop oil leaks?

Due to its chemical inertness, PTFE tape is resistant to both petrol and oil. Therefore, it is often used in automotive applications to seal and lubricate fuel line joints. … This means that it is broadly suitable for use in environments where it may encounter oil, petrol, diesel and other fuels.

How many times should you wrap Teflon tape around a pipe?

How many times should I wrap the tape around? When using 3.5 mil tape on pipe sizes up to 1¼”, three revolutions should do it. Beyond that, you’re just wasting your customer’s time — and your own. A 3.0 mil tape needs four to five full wraps around the pipe end.

Don’t forget to share the post !

The post Will plumbers putty stop a leak? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, How do you fix a dried out P-trap?

It is easy to fix a P-trap that ran dry due to a period of inactivity. Flush the unused toilet and pour water down the sink and bathtub drains to restore the P-trap’s water barrier. Run water down the infrequently-used bathroom drains regularly to prevent the P-trap from running dry in the future.

on the other hand, When should you not use plumbers putty?

Do not use plumber’s putty where you need adhesive strength (to bond materials or prevent them from moving) or where you need a watertight seal in exposed areas.

also, Will plumbers putty stop leaks? Plumber’s putty seals the parts to prevent leaks. A common location for leaks, and thus putty, is around toilets and drains. Putty also helps seal the drains for sinks and tubs.

Is it better to use plumbers putty or silicone?

Plumber’s putty is for every home-owner when they find any faulty sink or water intrusion from any surface. It is easy to apply and remove. On the other hand, silicone does almost the same job with some additional features. For example, it brings more adhesiveness, making the seal watertight and thus it lasts more.

Why does my sink smell like poop?

One of the common reasons is drain obstacle or drain clogs. An block in the drain will often prevent water from flowing freely through the pipes. Oftentimes, the water become stuck along with other solid materials. And once these materials start to rot or decompose, it produces a poop-like smell.

What causes a dried out p trap?

When p-traps aren’t properly installed, they can become damaged and leak toxic sewer smells into your home. Below are common p-trap problems you can run into: Dry p-traps occur when the trap or interceptor has lost its water seal, allowing sewer gases to build back up through the drain and into your home.

Why does my whole house smell like poop?

A regular sewer-gas smell is just a bad stink with a definite odor of feces and sometimes a rotten-egg (hydrogen sulfide) smell and/or a moldy mustiness too. … because an empty or ‘dried-out’ P-trap is by far the most common cause of all sewer-gas smells.

Can you use too much plumbers putty?

It is normal for excess putty to ooze out when you tighten the fixture. How much depends on “how too much you applied to the basket strainer assembly. If you apply way too much and do not get it tight hot water will wash it out. If you apply the right amount and tighten it enough it won’t wash out in 20 years.

Which is better Teflon tape or plumbers putty?

Teflon tape gives a reliable seal on threaded pipe joints for liquids and gases that may be under considerable pressure. Plumber’s putty acts as a flexible caulk in situations where you need water resistance—but it cannot withstand any significant pressure.

What can be used instead of plumbers putty?

If you do not have plumber’s putty or cannot use it on your type of sink, then you can use silicone or even the foam or rubber gasket that comes with some pop-up assemblies. Fit the drain or fixture into its appropriate place, and this will ensure a watertight fit and limit the chances of having a leak.

What is the best sealant for leaking pipes?

The following list looks at the best pipe thread sealant for a number of applications.

• BEST OVERALL: Gasoila – SS16 Soft-Set Pipe Thread Sealant with PTFE.
• BEST BANG FOR THE BUCK: Dixon Valve TTB75 PTFE Industrial Sealant Tape.
• BEST FOR WATER: Oatey 31230 Pipe Joint Compound with PTFE with Brush.

How do I temporarily fix a leaking pipe?

How To Temporarily Patch A Leaky Pipe While You Wait For A Professional

1. Apply A Water Pipe Epoxy. …
2. Use Pipe Wraps. …
3. Take Advantage of Pipe Clamps. …
4. Utilize Rubber Pipe Connectors. …
5. Invest In Some Plumbing Repair Tape. …
6. Implement Repair Sleeves.

What can I substitute for plumbers putty?

A clay-like substance called plumber’s putty is the most popular choice for sealing sink drains, but you can also use silicone caulk.

• Most Popular: Plumber’s Putty.
• Plumber’s Putty Installation.
• Alternative: Silicone Caulk.
• Silicone Caulk Installation.

Can you use silicone to seal a sink drain?

Both plumber’s putty and silicone caulk provide a watertight seal for a sink drain. You must seal the area between a sink’s drain body and the actual sink surface. Otherwise water will leak out between the two and begin dripping under the sink.

Why can’t you use plumbers putty on plastic?

The putty can attack the chrome plating on the plastic drain and cause it to come off. Usually, plastic drains have a “foam” or rubber gasket to place under the drain “flange” so you do not have to use any sealant.

Can I pour bleach down the drain?

Pour bleach into them

Bleach is a powerful, toxic substance that should be used carefully and properly, and pouring it down a drain is not a proper use. Bleach can react with other substances in your pipes, potentially release fumes, and further plug up the system.

How do I deodorize my kitchen sink drain?

Pour baking soda and vinegar down the drain: Run hot tap water for several seconds, and then turn the water off. Dump one cup of baking soda down the drain followed by two cups of hot vinegar. Let the concoction fizz. After one hour, flush the drain with hot tap water.

How do I fix a smelly toilet P-trap?

If the smell persists, try pouring a quart of water into every drain in your home, including the sink and the toilet. If the odor remains after running water through all drains, you are probably dealing with an old or leaky P-trap. For the best results, contact a professional plumber to examine and replace your P-trap.

How do you fix a smelly P-trap?

To eliminate odors coming from a dry p-trap, pour half a gallon of water into the trap to restore the barrier. It will prevent the odors from seeping through the drain. Another helpful method is to add a cup of white vinegar bleach to get rid of larvae and slow down the evaporation.

Why does my P-trap stink?

A dried p trap will result in a sewer odor emitting from a sink that maybe hasn’t been used in a while. A p trap is designed to use water to block the sewer gases from leaking up the drain. If a sink’s p trap dies out this can result in a drain that smells bad.

How long does it take for a P-trap to dry out?

How Long Does It Take for a P-Trap to Dry Out? P-traps can dry out as quickly as a month, sometimes even less than that. This happens most often in winter. To prevent your P-trap from drying out, run the sink or shower for a minute or two once a week to keep water flowing and your P-traps from drying out.

What absorbs bad smells in Room?

Some of the best odor eliminators are coffee grounds, tea, vinegar, oats, and baking soda. Leaving a bowl of any of these odor absorbers out in a room that’s due for a little freshening up will help clear out the less-than-pleasant smells from the air.

What is the best thing to absorb odors?

Baking soda is very effective at absorbing odors from the air as well as from surfaces. Put baking soda in your trash can to eliminate orders, and sprinkle it on any surface an odor emits.

How do you remove odors from a house?

Rather than plugging deodorizers into your electrical sockets or lighting an arsenal of scented candles, use a few household staples such as baking soda, distilled white vinegar, coffee grounds, vanilla extract and lemons to get rid of odors once and for all.

Don’t forget to share the post !

The post Should I use plumbers putty on P-trap? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.