similarly, Do all front load washers have mold problems?

Do All Front Load Washers Have Mold Problems? Mold problems in front-load washing machines are very common, but not inevitable! … Factor in lingering residue from detergents and fabric softeners, and you’ve got a perfect environment for front-load washer mildew growth, especially inside the rubber ring of the door seal.

on the other hand, Does vinegar ruin rubber?

Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks.

also, Can you replace the rubber gasket on a front load washer? Front-loading washers contain rubber gaskets notorious for developing mold and destroying the gasket if the door on the washer is kept closed when not in use. … With some common household tools, a new front-load washer door gasket, boot or bellows, you can replace your old leaky gasket in little under a hour.

What causes black gunk in washing machine?

What Is That Black Stuff In Your Washing Machine? Basically, it’s bacteria, grease and mold. According to the website White Goods Help, this build up of grime can be the result of multiple issues occurring when you wash your clothes. Using environmentally friendly soaps.

Should you leave the door open on a front load washer?

Leave the washing machine lid or door open after every load of wash to allow moisture to escape. Wait a few hours before closing it again. Dry just-washed clothes promptly.

Why front load washers are bad?

Front-loaders can have mold/mildew problems.

If you use the wrong detergent, too much detergent, or too much fabric softener, or let the drum and gaskets stay wet between uses, mildew and mold will grow in your washer and it’ll stink. … Wipe out the door and gasket between every use.

What are the worst washing machines to buy?

The worst washing machines on the market today all leave a lot to be desired.
…
These are brought to you via Amazon reviews and a few YouTube videos.

1. Whirlpool WTW5000DW. …
2. Maytag MVWB835DW Bravos XL 5.3 Cu. …
3. Samsung White Top Load Washer. …
4. Samsung 4.5 Cu. …
5. LG WT7200CW 5.0 Cu.

Will vinegar ruin your washing machine?

Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks. … In his experience, front-load washers are especially susceptible to vinegar-related damage.

Will baking soda damage rubber?

It will not harm Glass, Chrome or Rubber products. The baking soda can cause clumping and clog the dispenser. … It’s OK to use baking soda to clean your aluminum pots and pans, but it’s just important to remember to rinse them right after.

Where do you put vinegar in a washing machine?

When washing your clothing, add 1/2 cup of vinegar to the fabric softener compartment just before the last rinse cycle. If you’d like your clothes to have a mild scent, add four or five drops of essential oil into the fabric softener compartment.

Can you replace washing machine rubber seal?

The rubber door seal on front-loaded washers will eventually develop mold, tear, or crumble apart. Purchase a new seal made exactly for your washing machine model, and you can replace it yourself.

How much does it cost to replace a front load washer seal?

Front-Load Washer Rubber Seal

You’ll likely pay $150 to repair or replace the rubber seal of a washer. A faulty seal will dump water all over your floor when you run your washer, so it’s important to replace it as soon as you notice any damage.

How do you get black gunk out of washing machine?

To remove black particles, follow these steps to clean the Washing Machine:

1. 1 Fill the Washing Machine with 3/4 of water.
2. 2 Add 1 to 2 litres of Clorox/Bleach.
3. 3 Leave it overnight.
4. 4 On the next day, do a clean tub or quick wash to wash away the molds (do not put in any clothing).

How do I clean the sludge out of my washing machine?

Combine the mild dish soap with the lemon juice and baking soda, add warm water and pour it into a spray bottle. Let is sit for 5 minutes and shake well. Spray the outside of the washing machine with the solution. Using a sponge, rub thoroughly to remove sludge or dirt build-up.

How do I clean the gunk out of my washing machine?

Pour two cups of white vinegar into the drum, then run a normal cycle at high heat—without any clothes, of course. The baking soda and vinegar should break up any residue stuck to your drum and kill any mold that might be present. They’ll also help remove any foul odors. 3.

Is Vinegar safe for front-load washers?

Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks. … In his experience, front-load washers are especially susceptible to vinegar-related damage.

What is the best way to clean a front loading washer?

How to Clean with Vinegar and Baking Soda

1. Make sure the drum is empty.
2. Then, sprinkle a half-cup of baking soda inside the drum.
3. Next, pour one cup of distilled white vinegar into the detergent dispenser.
4. Finally, run the washer on the hot water setting.

How often should you drain your front-load washer?

Wash the empty washer with HOT water at least once a week. The frequency depends on how many loads of washes you do but in general, once a week of a quick cleaning without clothes or detergent should be sufficient to wash and drain any debris that are stuck to the drum.

What are the disadvantages of a front loading washing machine?

Cons

• Front-loaders are often more expensive than top-loaders.
• You have to bend down to unload the machine.
• The air-tight door invites mold growth. Keeping the door ajar between loads helps to prevent this problem.
• The control panel on the front invites kids to press buttons and change settings.

Are top-loaders better than front?

The Verdict. Front-load washers are generally considered to be better at cleaning clothing than top-load washers, and with less wear and tear. Front-load washers also use less water than standard top-load washers.

What is the most reliable front load washer?

Samsung front-load washers rank highest in customer satisfaction, according to J.D. Power’s laundry appliance satisfaction study, and Samsung was named a most reliable brand by Yale Appliances and Puls repair technicians, as well.

What brand washer lasts the longest?

What washing machine brand lasts the longest? Speed Queen is considered the most reliable washing machine brand on the market. While their machines are aesthetically minimalist, the Speed Queen machines can last up to 25 years. Speed Queen dryers are similarly built and can last just as long.

Are top loaders better than front?

The Verdict. Front-load washers are generally considered to be better at cleaning clothing than top-load washers, and with less wear and tear. Front-load washers also use less water than standard top-load washers.

How long do LG washers last?

The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.

Don’t forget to share the post !

The post How do you remove black mold from washing machine rubber seal? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, Can you remove rubber seal from front load washer?

In order to keep a watertight seal, your front load washer comes equipped with a pliable rubber door gasket. … Once you have access to the seal, start by peeling back the sides and removing the retaining band around the exterior. Now you will be able to peel the seal itself away from the washer.

on the other hand, Will baking soda damage rubber?

It will not harm Glass, Chrome or Rubber products. The baking soda can cause clumping and clog the dispenser. … It’s OK to use baking soda to clean your aluminum pots and pans, but it’s just important to remember to rinse them right after.

also, Is white vinegar and distilled vinegar the same? White and distilled are types of vinegar. They differ fundamentally in their acetic acid content. White, also known as spirit vinegar, has 5% to 20% acetic acid. … Distilled can be made from any time of vinegar, wherein more ethanol is separated from the base mixture.

Can baking soda ruin your washing machine?

The baking soda can cause clumping and clog the dispenser. … Baking soda acts as a natural brightener and deodorizer. If you have particularly smelly clothes, using a full cup of baking soda will not harm your washer.

Do all front load washers have mold problems?

Do All Front Load Washers Have Mold Problems? Mold problems in front-load washing machines are very common, but not inevitable! … Factor in lingering residue from detergents and fabric softeners, and you’ve got a perfect environment for front-load washer mildew growth, especially inside the rubber ring of the door seal.

How do I clean the rubber around my washing machine door?

Cleaning the washing machine door seal

1. Add 1 cup of baking soda around the seal inside the drum.
2. Run the washing machine empty for a few wash cycles. …
3. Add 1 cup bleach and 1 cup baking soda into the washing powder drawer. …
4. When the cycles are completed, put a few drops of washing-up liquid in warm water and mix it well.

Can isopropyl alcohol damage rubber?

Exposing rubber to rubbing alcohol infrequently can cause discoloration and deterioration, but prolonged use of isopropyl alcohol will wear down and eventually destroy it. Ensure the longevity of rubber by keeping it away from rubbing alcohol.

Where do you put vinegar in a washing machine?

When washing your clothing, add 1/2 cup of vinegar to the fabric softener compartment just before the last rinse cycle. If you’d like your clothes to have a mild scent, add four or five drops of essential oil into the fabric softener compartment.

What can I use instead of distilled white vinegar?

White vinegar substitute: If you need a different vinegar to substitute for white vinegar, use apple cider vinegar or malt vinegar. Depending on your recipe, you could also swap in lemon or lime juice.

Can I use white vinegar instead of distilled vinegar for cleaning?

Regular, white vinegar consists of about 5% acetic acid and 95% water. … Distilled vinegar is milder than white vinegar and will not be effective for cleaning. Do not confuse cleaning vinegar with industrial vinegar. This product is mainly used to kill off weeds and contains up to 20% acetic acid.

Is distilled malt vinegar the same as white vinegar for cleaning?

The most notable difference between the two is that they have a different acetic acid content. … On the other hand, distilled malt vinegar has a lower acetic acid content level of around, if not less than, 4%. The high level of acetic acid in white vinegar is what makes it a good cleaning product.

Can I mix vinegar and baking soda in washing machine?

Although vinegar and baking soda are safe to use in both regular and HE washing machines, they are considerably less efficient than high-performance laundry detergents at delivering an outstanding and odorless clean.

How do hotels keep towels so white?

First, they wash with laundry detergent. Then, they wash again with fabric softener. The final wash includes bleach to bring out the white color. In other words, hotels don’t bleach the linens within an inch of its life and call it “good.”

Should you leave the door open on a front-load washer?

Leave the washing machine lid or door open after every load of wash to allow moisture to escape. Wait a few hours before closing it again. Dry just-washed clothes promptly.

Why front-load washers are bad?

Front-loaders can have mold/mildew problems.

If you use the wrong detergent, too much detergent, or too much fabric softener, or let the drum and gaskets stay wet between uses, mildew and mold will grow in your washer and it’ll stink. … Wipe out the door and gasket between every use.

What are the worst washing machines to buy?

The worst washing machines on the market today all leave a lot to be desired.
…
These are brought to you via Amazon reviews and a few YouTube videos.

1. Whirlpool WTW5000DW. …
2. Maytag MVWB835DW Bravos XL 5.3 Cu. …
3. Samsung White Top Load Washer. …
4. Samsung 4.5 Cu. …
5. LG WT7200CW 5.0 Cu.

How do you deep clean a front-loading washing machine?

How To Deep Clean Your Front-Loading Washing Machine

1. Step 1 – Run a Wash Cycle With 2 Cups Vinegar. …
2. Step 2 – Run a Hot Wash Cycle With 2 Cups Bleach. …
3. Step 3 – Run Additional Rinse Cycle. …
4. Step 4 – Clean Detergent Tray. …
5. Step 5 – Clean The Door Seal And Machine Exterior.

How do you clean a moldy gasket on a washing machine?

1-part vinegar and 4 parts water — just vinegar and water can do the trick if the mold growth in your washer gasket is in sparse amounts.

How do you get black marks off washing machine rubber?

Firstly, mix together a homemade cleaning solution of 1 cup bleach and 1 cup baking soda, and pour it into the detergent drawer. Then add an additional cup of baking soda into the washing machine drum, around the seal area.

Will rubbing alcohol damage fabric?

Although it’s a strong stain solution, alcohol isn’t the best choice for certain fabrics. Its strength can also lead to faded color on some fabrics, and even damage. … For tricky stains that appear on fabrics and items unsuitable for alcohol, try making your own homemade stain remover.

What is the difference between isopropyl alcohol and rubbing alcohol?

The difference between rubbing alcohol and more pure forms of isopropyl alcohol is that rubbing alcohol contains denaturants which make the solution unpalatable for human consumption. … In documents cited by the CDC, “rubbing alcohol” is defined as 70% isopropyl alcohol and 30% water.

How do you clean the rubber seal on a washing machine?

Cleaning the washing machine door seal

1. Add 1 cup of baking soda around the seal inside the drum.
2. Run the washing machine empty for a few wash cycles. …
3. Add 1 cup bleach and 1 cup baking soda into the washing powder drawer. …
4. When the cycles are completed, put a few drops of washing-up liquid in warm water and mix it well.

Don’t forget to share the post !

The post Does vinegar harm rubber? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, How do you clean the gasket on a front-load washer?

Clean Gasket: Use a rag or towel to clean the rubber door gasket on a front-loading washer with either hot soapy water or a spritz of mildew cleaner. Make sure to wipe underneath and around it as well. Be prepared for some slime and gunk, and possibly a stray sock or two!

on the other hand, Should you leave the door open on a front load washer?

Leave the washing machine lid or door open after every load of wash to allow moisture to escape. Wait a few hours before closing it again. Dry just-washed clothes promptly.

also, Why front load washers are bad? Front-loaders can have mold/mildew problems.

If you use the wrong detergent, too much detergent, or too much fabric softener, or let the drum and gaskets stay wet between uses, mildew and mold will grow in your washer and it’ll stink. … Wipe out the door and gasket between every use.

What are the worst washing machines to buy?

The worst washing machines on the market today all leave a lot to be desired.
…
These are brought to you via Amazon reviews and a few YouTube videos.

1. Whirlpool WTW5000DW. …
2. Maytag MVWB835DW Bravos XL 5.3 Cu. …
3. Samsung White Top Load Washer. …
4. Samsung 4.5 Cu. …
5. LG WT7200CW 5.0 Cu.

What is the best cleaner for front load washer?

• Affresh Washer Cleaner. In addition to getting rid of mold and mildew, Affresh breaks down grease and residue at only $6 for a three count. …
• Tide Washing Machine Cleaner. …
• Oxi Clean Washing Machine Cleaner. …
• HIWILL Washing Machine Cleaner. …
• Glisten. …
• Clorox Washing Machine Cleaner. …
• Eco-Gals Eco Swilz Eco-Friendly Washer Cleaner.

Can you remove rubber seal from front load washer?

In order to keep a watertight seal, your front load washer comes equipped with a pliable rubber door gasket. … Once you have access to the seal, start by peeling back the sides and removing the retaining band around the exterior. Now you will be able to peel the seal itself away from the washer.

Should you leave your washing machine door open between washes?

Leave the washing machine lid or door open after every load of wash to allow moisture to escape. Wait a few hours before closing it again. Dry just-washed clothes promptly. … Clean your washing machine tub on a regular basis to remove residue that encourages the growth of mildew.

Is Vinegar safe for front-load washers?

Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks. … In his experience, front-load washers are especially susceptible to vinegar-related damage.

What is the best way to clean a front loading washer?

How to Clean with Vinegar and Baking Soda

1. Make sure the drum is empty.
2. Then, sprinkle a half-cup of baking soda inside the drum.
3. Next, pour one cup of distilled white vinegar into the detergent dispenser.
4. Finally, run the washer on the hot water setting.

How often should you drain your front-load washer?

Wash the empty washer with HOT water at least once a week. The frequency depends on how many loads of washes you do but in general, once a week of a quick cleaning without clothes or detergent should be sufficient to wash and drain any debris that are stuck to the drum.

What are the disadvantages of a front loading washing machine?

Cons

• Front-loaders are often more expensive than top-loaders.
• You have to bend down to unload the machine.
• The air-tight door invites mold growth. Keeping the door ajar between loads helps to prevent this problem.
• The control panel on the front invites kids to press buttons and change settings.

Are top-loaders better than front?

The Verdict. Front-load washers are generally considered to be better at cleaning clothing than top-load washers, and with less wear and tear. Front-load washers also use less water than standard top-load washers.

What is the most reliable front load washer?

Samsung front-load washers rank highest in customer satisfaction, according to J.D. Power’s laundry appliance satisfaction study, and Samsung was named a most reliable brand by Yale Appliances and Puls repair technicians, as well.

What brand washer lasts the longest?

What washing machine brand lasts the longest? Speed Queen is considered the most reliable washing machine brand on the market. While their machines are aesthetically minimalist, the Speed Queen machines can last up to 25 years. Speed Queen dryers are similarly built and can last just as long.

Are top loaders better than front?

The Verdict. Front-load washers are generally considered to be better at cleaning clothing than top-load washers, and with less wear and tear. Front-load washers also use less water than standard top-load washers.

How long do LG washers last?

The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.

Does vinegar damage washing machines?

Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks. … In his experience, front-load washers are especially susceptible to vinegar-related damage.

How do you clean a front load washer without bleach?

Instructions

1. Mix together the water and baking soda to make your detergent.
2. Pour the mixture into the detergent area.
3. Pour the two cups of vinegar directly into the drum of the washer.
4. Set the load to the “Wash” cycle, or if yours doesn’t have a wash cycle, select the highest water temperature setting.

How do you add vinegar to a front load washer?

Add two cups of white vinegar and let the cycle run. (If you have a front load washer, pour the vinegar into the detergent dispenser.) For an extra-clean washing machine, repeat the cycle with a half-cup of baking soda. You’ll also need to hand-wash the top portion of the agitator and basin above the water line.

How do I clean the rubber around my washing machine door?

Cleaning the washing machine door seal

1. Add 1 cup of baking soda around the seal inside the drum.
2. Run the washing machine empty for a few wash cycles. …
3. Add 1 cup bleach and 1 cup baking soda into the washing powder drawer. …
4. When the cycles are completed, put a few drops of washing-up liquid in warm water and mix it well.

How much does it cost to replace a front-load washer seal?

Front-Load Washer Rubber Seal

You’ll likely pay $150 to repair or replace the rubber seal of a washer. A faulty seal will dump water all over your floor when you run your washer, so it’s important to replace it as soon as you notice any damage.

Should you air out washing machine?

DO leave your washing machine door open after use

This will allow it to air out and help prevent mould and mildew from growing – so no more nasty smells lingering in the kitchen.

How do I get rid of the musty smell in my front load washer?

Getting the Musty Smell Out

1. Clean the rubber gasket. …
2. Wipe down the washer drum and the inside of the washer door (window). …
3. Remove and/or wipe down the dispenser drawer. …
4. Run an empty wash cycle with baking soda. …
5. Run an empty wash cycle with distilled white vinegar. …
6. Run an empty wash cycle with liquid chlorine bleach.

How do I stop my front load washer from smelling?

Smelly Washer:

To eliminate smells, pour 1/2 cup of baking soda inside the drum. Add a cup of white vinegar into the detergent dispenser. Press start to run the washer empty on the hot water setting.

Don’t forget to share the post !

The post Do all front load washers have mold problems? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, How do you clean a moldy gasket on a washing machine?

1-part vinegar and 4 parts water — just vinegar and water can do the trick if the mold growth in your washer gasket is in sparse amounts.

on the other hand, Should you leave the door open on a front load washer?

Leave the washing machine lid or door open after every load of wash to allow moisture to escape. Wait a few hours before closing it again. Dry just-washed clothes promptly.

also, Why front load washers are bad? Front-loaders can have mold/mildew problems.

If you use the wrong detergent, too much detergent, or too much fabric softener, or let the drum and gaskets stay wet between uses, mildew and mold will grow in your washer and it’ll stink. … Wipe out the door and gasket between every use.

What are the worst washing machines to buy?

The worst washing machines on the market today all leave a lot to be desired.
…
These are brought to you via Amazon reviews and a few YouTube videos.

1. Whirlpool WTW5000DW. …
2. Maytag MVWB835DW Bravos XL 5.3 Cu. …
3. Samsung White Top Load Washer. …
4. Samsung 4.5 Cu. …
5. LG WT7200CW 5.0 Cu.

Does vinegar damage washing machines?

Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks. … In his experience, front-load washers are especially susceptible to vinegar-related damage.

How do I get black mold out of my washing machine?

How to kill mold that’s already in your washing machine

1. Start by putting on gloves and grabbing an old towel that you don’t care about.
2. Mix a solution of either bleach and hot water or vinegar and hot water. …
3. Dip the towel in the mixture and start scrubbing away any visible mold.

Can you remove the rubber gasket from front load washer?

In order to keep a watertight seal, your front load washer comes equipped with a pliable rubber door gasket. … Once you have access to the seal, start by peeling back the sides and removing the retaining band around the exterior. Now you will be able to peel the seal itself away from the washer.

Is Vinegar safe for front-load washers?

Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks. … In his experience, front-load washers are especially susceptible to vinegar-related damage.

What is the best way to clean a front loading washer?

How to Clean with Vinegar and Baking Soda

1. Make sure the drum is empty.
2. Then, sprinkle a half-cup of baking soda inside the drum.
3. Next, pour one cup of distilled white vinegar into the detergent dispenser.
4. Finally, run the washer on the hot water setting.

How often should you drain your front-load washer?

Wash the empty washer with HOT water at least once a week. The frequency depends on how many loads of washes you do but in general, once a week of a quick cleaning without clothes or detergent should be sufficient to wash and drain any debris that are stuck to the drum.

What are the disadvantages of a front loading washing machine?

Cons

• Front-loaders are often more expensive than top-loaders.
• You have to bend down to unload the machine.
• The air-tight door invites mold growth. Keeping the door ajar between loads helps to prevent this problem.
• The control panel on the front invites kids to press buttons and change settings.

Are top-loaders better than front?

The Verdict. Front-load washers are generally considered to be better at cleaning clothing than top-load washers, and with less wear and tear. Front-load washers also use less water than standard top-load washers.

What is the most reliable front load washer?

Samsung front-load washers rank highest in customer satisfaction, according to J.D. Power’s laundry appliance satisfaction study, and Samsung was named a most reliable brand by Yale Appliances and Puls repair technicians, as well.

What brand washer lasts the longest?

What washing machine brand lasts the longest? Speed Queen is considered the most reliable washing machine brand on the market. While their machines are aesthetically minimalist, the Speed Queen machines can last up to 25 years. Speed Queen dryers are similarly built and can last just as long.

Are top loaders better than front?

The Verdict. Front-load washers are generally considered to be better at cleaning clothing than top-load washers, and with less wear and tear. Front-load washers also use less water than standard top-load washers.

How long do LG washers last?

The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.

Can baking soda ruin your washing machine?

The baking soda can cause clumping and clog the dispenser. … Baking soda acts as a natural brightener and deodorizer. If you have particularly smelly clothes, using a full cup of baking soda will not harm your washer.

Where do you put vinegar in a washing machine?

To clean your clothes with vinegar, put 1/2 cup distilled white vinegar in your washing machine’s detergent compartment. You don’t need to add any other detergents.

What happens if you mix vinegar and laundry detergent?

It doesn’t cause any harm, but it will make the detergent less effective because vinegar is so acid. You can absolutely use vinegar and laundry detergent in the same load, but you cannot mix them together .

What is the best mold and mildew remover?

• Best Overall: RMR-86 Instant Mold & Mildew Stain Remover. …
• Best Budget: Clorox Tilex Mold and Mildew Remover. …
• Best for Fabric: STAR BRITE Mold & Mildew Stain Remover. …
• Best Set: RMR-86 Complete Mold Killer & Remover DIY Bundle. …
• Best for Wood: Spray & Forget Revolutionary Roof Cleaner.

How do you know if your washing machine has mold?

Check for the Source of Mold in Washers

*Check the hoses for cracks or tears. *Pull your washer away from the wall to expose the hoses. Check for drying or cracking along the entire length of the hoses, and make sure the connections are secure. Run the washing machine and observe the hoses to look for leaks.

What can I use to clean the rubber seal on my washing machine?

You can use 2 cups of vinegar, ¼ cup of baking soda and ¼ water instead if you do not have bleach on hand. When the cycles are completed, put a few drops of washing-up liquid in warm water and mix it well. Using a clean cloth, wipe down the rubber seal on all sides with the mixture.

Don’t forget to share the post !

The post Do all front load washers have mold problems? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.