1. Blender components are not placed in the proper order after assembly.
2. The pitcher was not locked in to the correct position.
3. The lid of the pitcher was not locked tightly in place.
4. The blades are not turning properly.
5. The power light on the blender is not lit.

Likewise, How do you fix a blender that won’t turn on?

If your blender won’t turn on at all, the issue could be a completely burned out motor. Replacing the motor is an advanced repair, make sure to unplug the blender before starting. To access the motor, flip over the base and unscrew the bottom cover. Unscrew and remove the inside cover, also known as a motor platform.

Also, Is there a reset button on a Ninja blender?

First, try unplugging the blender and trying another appliance on the outlet to see if there is power to the outlet. If not, try resetting the outlet by using a reset button (if there is one), or by resetting the breaker in your circuit breaker box.

Moreover, Why is my Ninja blender not spinning?

Most of the time when your blender is powered on and the blades will not rotate, it is because you have overfilled the container. Remove some of the food/liquid and try to power on your blender again.

Can a Ninja blender be repaired?

The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced for as long as you own the original unit. … SharkNinja reserves the right to replace the unit with one of equal or greater value.

Why did my blender suddenly stopped working?

In the event that the unit loses power, it’s possible that the motor was overheated. In this case, the thermal fuse has activated and turned off the blender in order to cool itself down. Unplug the unit and wait 15 minutes. This should reset the fuse and be able to blend again.

How do you fix a burnt out blender?

Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.

Why is my blender not responding?

In most cases, the broken or outdated graphics driver is the main culprit behind the Blender crashing issues. If you haven’t updated your graphics driver for a long time, or if the graphics driver file is broken or corrupted, you may suffer from the program crashing, stuttering, and even screen flickering issues.

Why does my Ninja Blender say error?

With your Nutri Ninja® cup there is a safety feature that after you run 3 consecutive times without removing the cup from the base the blender will shut off and you will have to unplug your unit and wait 15 minutes to be able to use it again.

How do you reset a Ninja?

To reset your Ninja Bot back to a WHITE BELT:

1. Press and hold the head button for 8 seconds. A beep will sound, keep holding the button.
2. If held an additional 2 seconds (10 seconds total), Factory reset occurs. Eyes turn solid red and you will hear a beep.
3. Turn your Ninja Bot OFF then ON again (this MUST be done).

How do I fix my blender blade not spinning?

Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.

How do you fix a burnt blender?

Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.

Does Ninja blender have a lifetime warranty?

EuroPro Operating LLC (“EuroPro”) warrants that if anything ever happens to your NINJA, it will replace it. This warranty extends only to the original consumer purchaser and is not transferable. … In addition, proof of purchase must be demonstrated.

Why does my Ninja blender smell like it’s burning?

If your blender is emitting a burnt or electrical smell from its motor, it can be an alarming sign. … Dull blades from blending lots of ice or other hard foods can also cause stress on the motor, sometimes resulting in a burning smell. Replacing the blade assembly is an easy repair you can complete yourself.

How do you fix a jammed hand blender?

Here are some steps to follow if the blade shaft gets stuck.

1. Step 1 – Be Familiar with the Shaft Assembly. …
2. Step 2 – Prepare the Shaft and Main Body for Clamping. …
3. Step 3 – Remove the Shaft from Main Body. …
4. Step 4 – Clean the Joints. …
5. Step 5 – Lubricate the Joint.

How long does a blender last?

Typically, Beautyblenders last anywhere from 3 to 6 months, depending on how well you take care of it.

Can a blender overheat?

From smoothies and sauces to facemasks and body scrubs, blenders see tons of action. Regardless of what gets diced up in your blender eventually, you may notice it start to overheat. Overheating can present itself in a few different ways, but the bottom line is that it’s not a good thing.

How do I fix a blender crash on startup?

If Blender crashes on startup there are a few things to check for:

1. See if your computer meets the minimum requirements.
2. Confirm that your graphics card is supported and that the drivers support at least OpenGL 2.1.
3. Make sure you are using the correct Blender version (32 or 64 bit) for your architecture.

Why does blender freeze?

Blender freezes temporarily when editing material color and/or changing number values in sliders.

How do I stop Blender from crashing?

The most common causes of Blender crashes: Running out of memory. Issues with graphics hardware or drivers.
…

1. Reduce undo steps Preferences ‣ System ‣ Memory & Limits ‣ Undo Steps.
2. Using multisample anti-aliasing also increases the memory usage and makes the display slower.

What does E01 mean on Ninja?

Call Customer Service at 1-877-646-5288. “E01” Appears on the. Display Screen. Cooking pot is not inside the cooking system housing.

Why does my Ninja Blender smell like it’s burning?

If your blender is emitting a burnt or electrical smell from its motor, it can be an alarming sign. … Dull blades from blending lots of ice or other hard foods can also cause stress on the motor, sometimes resulting in a burning smell. Replacing the blade assembly is an easy repair you can complete yourself.

Why does my Ninja keep beeping?

The beep often means that you have to adjust the brew settings. If the brewer beeps mid-brew, or it doesn’t start brewing at all – you can try running 2 clean cycles and checking the water valve to make sure it is not plugged.

Can I reset my Ninja coffee maker?

Finally, a tried and true technology fix: unplug your machine. If other fixes aren’t working, the best way to reset your Ninja Coffee Bar is to unplug it from the wall. Wait for at least five minutes and then plug it back in. Doing this will fully reset your Coffee Bar, bringing it back to its original condition.

Why is Ninja coffee bar beeping?

If your machine is beeping, this could mean that the drip stop isn’t open or the brew basket isn’t pushed in properly. If you try troubleshooting your problem and your coffee bar still isn’t working, contact Ninja to see if they can help.

The post How do you troubleshoot a Ninja blender? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, How long should you run your blender?

Normally we can run the blender for 3 minutes or more depending upon the load (i,e if you are blending hard material;motor does more effort to rotate to blend) If you are in not hurry to blend just give some time to cool down the body temp to increase the life of motor (hence blender).

Also, What can a Vitamix do that a blender can t?

IT CAN BLEND ANYTHING

Yes, it will blend. Creamy soups, thick dips, sticky dough, dense cake batter, fruit smoothies, boozy blended drinks, DIY nut flours, raw juices made from whole fruits and vegetables, chunky nut butters—all of it will blend. And the list doesn’t end there.

Moreover, What blenders do Starbucks use?

This most famous coffee business giant has made people wonder what kind of blender of which company they are using to make their signature delicious drinks. They use a 48 ounce Vitamix blender that is with 3 horsepower.

Is Vitamix blender worth the price?

The short answer is, yes. Vitamix blenders are worth it because they’re more powerful, durable, and versatile than the competition. … Whether you’re blending a smoothie, soup, or making nut butter, no other brand can deliver the power and precision of Vitamix.

Can you overuse a blender?

Overusing the tamper or blending very thick foods for too long like nut butters can cause the motor to overheat. Unplug the product and let it cool down for an hour.

What happens if you leave a blender on too long?

Not only is it a pain to scrub away bits of food that may have dried up on the inside of the container’s walls, but if anything sticky like nut butter or dried fruit lingers too long, it can also clog the container, mess up the gasket, or damage the blades.

How do you fix a burnt out blender?

Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.

Is vitamix really the best blender?

Vitamix blenders are widely considered the best on the market, and their price reflects their track record of performance. I was impressed with how easy the Vitamix was to use out of the box and the wide variety of tasks it could complete that would normally be reserved for a heavy-duty food processor or stand mixer.

Why is vitamix so good?

Vitamix is a machine built around convenience. Its incredible processing speeds make complicated recipes, even hot soup recipes, in a matter of minutes. If you can afford to cut your cook times down to small fractions of the original, do something nice for your kitchen (and yourself) and splurge.

What is the best smoothie blender?

The Best Blenders for Smoothies, According to Chefs and Smoothie Fanatics

• Vitamix Professional Series 750 Blender. …
• NutriBullet 600-Watt Blender. …
• Vitamix A3500 Ascent Series Blender. …
• Vitamix E310 Explorian Blender. …
• Blendtec Classic 575 Blender. …
• Blendtec Professional Blender 800. …
• Breville BBL620 Fresh & Furious Blender.

What is better than a ninja blender?

The Vitamix scores slightly higher for making soup, but Ninja rates a little better for ease of use. They’re tied in the icy drinks, ice crushing, and noise tests. … And it’ll turn out decent soups—as long as you don’t blend ingredients while they’re hot. Plus, you don’t have to pay extra for personal-sized cups.

What is the strongest blender?

The Best Blender

• Our pick. Vitamix 5200. The best blender. …
• Runner-up. Oster Versa Pro Series Blender. A more affordable but less durable blender. …
• Also great. Cleanblend Blender. Powerful blender motor, shorter warranty. …
• Budget pick. KitchenAid K150 3 Speed Ice Crushing Blender. For occasional blending.

Which blender is best for crushing ice?

The 10 Best Blenders for Crushing Ice

1. Blendtec Classic 575 Blender – Best Overall. …
2. Ninja BL610 Ice Crushing Blender – Best Value. …
3. Vitamix 7500 Ice Blender – Premium Choice. …
4. Hamilton 54220 Ice-Crushing Blenders. …
5. Oster Reverse Crush Ice Blender. …
6. Cleanblend 2001 Blender. …
7. Homgeek Ice Crushing Blender. …
8. COSORI C700-PRO Blender.

Which brand of Blender is the best?

The Best Blender

• Our pick. Vitamix 5200. The best blender. …
• Runner-up. Oster Versa Pro Series Blender. A more affordable but less durable blender. …
• Also great. Cleanblend Blender. Powerful blender motor, shorter warranty. …
• Budget pick. KitchenAid K150 3 Speed Ice Crushing Blender. For occasional blending.

What Blender is comparable to a Vitamix?

Top 10 Alternative Blenders Cheaper than Vitamix

• 1 nov. 2020

Is it bad to run a blender empty?

Running your blender while it is empty can be just as damaging as overloading it. Without any contents, the blades and motor will run too fast causing it to wear out quicker.

Where should I keep my blender?

If you opt to put the blender in a cabinet, put it somewhere with plenty of space so that you don’t damage any parts of it. As discussed before, you will want it in a dry place away from moisture. If you use your blender once a week or so, keep it close and put it in a cabinet with easy access.

Is there a recall on Ninja blenders?

SharkNinja Ninja blenders recalled

SharkNinja has recalled 1.1 million blenders due to a laceration risk posed by the blender if a consumer pours the pitcher or inverts the pitcher after removing the lid while the loose stacked blade assembly is still inside the pitcher.

Is it OK to put a glass blender in the freezer?

Yes, these cups are freezer safe. Just make sure you allow them to warm up before putting the blade assembly on them and using them on your blender. Even running them under warm water until they are no longer frozen would do the trick.

How do you clean a dirty blender?

The Best Approach for Cleaning Your Dirty Blender

Simply fill the blender partially full of water, add soap, and run it for about thirty seconds. The Kitchn suggests using different settings on your blender (e.g., pulse, crush) to be really thorough. Then do a final rinse. Voilà!

How do you fix a blender that won’t turn on?

If your blender won’t turn on at all, the issue could be a completely burned out motor. Replacing the motor is an advanced repair, make sure to unplug the blender before starting. To access the motor, flip over the base and unscrew the bottom cover. Unscrew and remove the inside cover, also known as a motor platform.

What causes blender to stop working?

Another possible cause of blender not working could be jamming. For this you must first disassemble the drive and then turn the blade shaft. If it seems to be jammed, check what is the cause of jamming. In most cases it is debris in the blades of the blender that causes jamming.

Can a blender overheat?

From smoothies and sauces to facemasks and body scrubs, blenders see tons of action. Regardless of what gets diced up in your blender eventually, you may notice it start to overheat. Overheating can present itself in a few different ways, but the bottom line is that it’s not a good thing.

The post Which blender is better Vitamix or Ninja? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, Can you reset Ninja blender?

Like most blenders, the Ninja brand blender does not have a reset button and cannot be reset with a button-pushing sequence. If you believe your issue stems from an internal electrical glitch, the owner’s manual states that you can always disconnect the Ninja from the power source.

Also, Why did my blender suddenly stopped working?

In the event that the unit loses power, it’s possible that the motor was overheated. In this case, the thermal fuse has activated and turned off the blender in order to cool itself down. Unplug the unit and wait 15 minutes. This should reset the fuse and be able to blend again.

Moreover, How do you fix a burnt out blender?

Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.

Why is my blender not responding?

In most cases, the broken or outdated graphics driver is the main culprit behind the Blender crashing issues. If you haven’t updated your graphics driver for a long time, or if the graphics driver file is broken or corrupted, you may suffer from the program crashing, stuttering, and even screen flickering issues.

How do you troubleshoot a ninja blender?

Top 5 Common causes for a Ninja Blender not to be working

1. Blender components are not placed in the proper order after assembly.
2. The pitcher was not locked in to the correct position.
3. The lid of the pitcher was not locked tightly in place.
4. The blades are not turning properly.
5. The power light on the blender is not lit.

Why is my Ninja not blending?

The multi-speed blenders such as Ninja blender, usually sometimes run into the troubles such as not making smooth blends. There are several reasons for this to happen such as an unassembled blender, clogged blades, unclean blenders, stuck blades, poor settings, insufficient current in the power outlet, etc.

Can a Ninja blender be repaired?

The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced for as long as you own the original unit. … SharkNinja reserves the right to replace the unit with one of equal or greater value.

How do you fix a jammed hand blender?

Here are some steps to follow if the blade shaft gets stuck.

1. Step 1 – Be Familiar with the Shaft Assembly. …
2. Step 2 – Prepare the Shaft and Main Body for Clamping. …
3. Step 3 – Remove the Shaft from Main Body. …
4. Step 4 – Clean the Joints. …
5. Step 5 – Lubricate the Joint.

How long does a blender last?

Typically, Beautyblenders last anywhere from 3 to 6 months, depending on how well you take care of it.

Can a blender overheat?

From smoothies and sauces to facemasks and body scrubs, blenders see tons of action. Regardless of what gets diced up in your blender eventually, you may notice it start to overheat. Overheating can present itself in a few different ways, but the bottom line is that it’s not a good thing.

How do I fix a blender crash on startup?

If Blender crashes on startup there are a few things to check for:

1. See if your computer meets the minimum requirements.
2. Confirm that your graphics card is supported and that the drivers support at least OpenGL 2.1.
3. Make sure you are using the correct Blender version (32 or 64 bit) for your architecture.

Why does blender freeze?

Blender freezes temporarily when editing material color and/or changing number values in sliders.

How do I stop Blender from crashing?

The most common causes of Blender crashes: Running out of memory. Issues with graphics hardware or drivers.
…

1. Reduce undo steps Preferences ‣ System ‣ Memory & Limits ‣ Undo Steps.
2. Using multisample anti-aliasing also increases the memory usage and makes the display slower.

Why does my blender not blend?

Start by adding the yogurt, or a base liquid such as water, juice, or milk, to the blender. … Too many frozen ingredients are another reason the blender might be stalling; use a mix of fresh and frozen fruit to ensure a smoother blend.

What does E01 mean on my ninja blender?

“E01” or “E02” Remove and reinstall the pitcher. … Be sure the lid is on the pitcher and locked in place before running a program. “JAr” The pitcher is not properly attached to the base. Be sure the pitcher is secured in the base before selecting a program.

How do you fix a burnt blender?

Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.

Does Ninja blender have a lifetime warranty?

EuroPro Operating LLC (“EuroPro”) warrants that if anything ever happens to your NINJA, it will replace it. This warranty extends only to the original consumer purchaser and is not transferable. … In addition, proof of purchase must be demonstrated.

Why does my Ninja blender smell like it’s burning?

If your blender is emitting a burnt or electrical smell from its motor, it can be an alarming sign. … Dull blades from blending lots of ice or other hard foods can also cause stress on the motor, sometimes resulting in a burning smell. Replacing the blade assembly is an easy repair you can complete yourself.

How do you wash a hand blender?

Just pour a little dishwashing liquid inside and pour warm water over it. Then switch the appliance on and mix water and liquid in the same way as previously prepared dishes. If the blender has dried residue on its blades, you can leave it in water for 20 minutes. Wash again after soaking.

Which motor is used in hand blender?

Introduction:This hand blender mixer uses 230V DC motor, providing the best speed and torque for hand blender, compact structure, long life, high speed.

What blender does Gordon Ramsay use?

Gordon Ramsay by Bamix Hand Blender.

What is the most powerful blender?

The Best Blender

• Our pick. Vitamix 5200. The best blender. …
• Runner-up. Oster Versa Pro Series Blender. A more affordable but less durable blender. …
• Also great. Cleanblend Blender. Powerful blender motor, shorter warranty. …
• Budget pick. KitchenAid K150 3 Speed Ice Crushing Blender. For occasional blending.

How powerful should a blender be?

A good professional blender will be 1200 to 1500 watts. Professional grade blenders are for the true blending connoisseur. For some, blending is an important part of a particular lifestyle or diet plan that requires daily use, so textures become really important.

The post How do you fix a blender that won’t turn on? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

1. Check for power connectivity. You can check for power connectivity if blender not working. …
2. Clean the terminals. …
3. Check the fuse. …
4. Make sure the blender is not jamming. …
5. Do a final check.

Likewise, Why is my Ninja blender not spinning?

Most of the time when your blender is powered on and the blades will not rotate, it is because you have overfilled the container. Remove some of the food/liquid and try to power on your blender again.

Also, Why did my blender suddenly stopped working?

In the event that the unit loses power, it’s possible that the motor was overheated. In this case, the thermal fuse has activated and turned off the blender in order to cool itself down. Unplug the unit and wait 15 minutes. This should reset the fuse and be able to blend again.

Moreover, Why is my blender not responding?

In most cases, the broken or outdated graphics driver is the main culprit behind the Blender crashing issues. If you haven’t updated your graphics driver for a long time, or if the graphics driver file is broken or corrupted, you may suffer from the program crashing, stuttering, and even screen flickering issues.

Why does my blender keep stopping?

Combining smoothie ingredients in the wrong order can cause frozen fruit and ice to get caught in the blender’s blades. … Too many frozen ingredients are another reason the blender might be stalling; use a mix of fresh and frozen fruit to ensure a smoother blend.

How do you troubleshoot a ninja blender?

Top 5 Common causes for a Ninja Blender not to be working

1. Blender components are not placed in the proper order after assembly.
2. The pitcher was not locked in to the correct position.
3. The lid of the pitcher was not locked tightly in place.
4. The blades are not turning properly.
5. The power light on the blender is not lit.

How do you fix a dead blender?

Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.

How long does a blender last?

Typically, Beautyblenders last anywhere from 3 to 6 months, depending on how well you take care of it.

Can a blender overheat?

From smoothies and sauces to facemasks and body scrubs, blenders see tons of action. Regardless of what gets diced up in your blender eventually, you may notice it start to overheat. Overheating can present itself in a few different ways, but the bottom line is that it’s not a good thing.

Should I wait for Blender to respond?

You can wait if you want, but it’s probably going to take a long time before it will start responding. If you close it there is a way to recover you data; Blender autosaves your projects every 5 minutes, and you can change it if you want.

What to do if Blender keeps crashing?

The most common causes of Blender crashes: Running out of memory. Issues with graphics hardware or drivers.
…
To check memory usage by Blender:

1. On Windows, use Task Manager and sort by Memory.
2. On macOS, use Activity Monitor. app and open Memory tab. Alternatively, run top -o MEM .
3. On Linux, run top -o %MEM .

How do I fix a Blender crash on startup?

If Blender crashes on startup there are a few things to check for:

1. See if your computer meets the minimum requirements.
2. Confirm that your graphics card is supported and that the drivers support at least OpenGL 2.1.
3. Make sure you are using the correct Blender version (32 or 64 bit) for your architecture.

How do you test a blender motor?

To test a blender’s motor: Step 1: Place a probe on each cord prong. Step 2: Select a speed-control button or turn the speed controller slightly, then read the resistance on the meter. Step 3: Next, rotate the drive stud clockwise one turn.

Can a Ninja blender be repaired?

The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced for as long as you own the original unit. … SharkNinja reserves the right to replace the unit with one of equal or greater value.

Why does my Ninja blender say error?

With your Nutri Ninja® cup there is a safety feature that after you run 3 consecutive times without removing the cup from the base the blender will shut off and you will have to unplug your unit and wait 15 minutes to be able to use it again.

How can I blend without a blender?

More ways to make a smoothie without a blender:

1. Borrow a friend’s blender. If you do this, take enough produce to make a massive batch of puree. Pour the puree into an ice cube tray and freeze. …
2. A food processor or immersion blender. They’re not blenders, but they can get the job done well enough.

What blender does Gordon Ramsay use?

Gordon Ramsay by Bamix Hand Blender.

What is the most powerful blender?

The Best Blender

• Our pick. Vitamix 5200. The best blender. …
• Runner-up. Oster Versa Pro Series Blender. A more affordable but less durable blender. …
• Also great. Cleanblend Blender. Powerful blender motor, shorter warranty. …
• Budget pick. KitchenAid K150 3 Speed Ice Crushing Blender. For occasional blending.

How powerful should a blender be?

A good professional blender will be 1200 to 1500 watts. Professional grade blenders are for the true blending connoisseur. For some, blending is an important part of a particular lifestyle or diet plan that requires daily use, so textures become really important.

Can a blender catch on fire?

The bearings in the blade assembly can become seized from liquid and food seeping through. This will cause the motor to work harder than it should, and either overheat or burn out. … The failure of other parts in your blender can cause the motor to fail as well, resulting in a burning or electrical smell.

What blender can you put hot liquid in?

Our top pick when it comes to the best blender for hot liquids is the Vitamix 5200. This powerful professional blender has stainless steel blades that spin fast enough to heat soup by friction, plus a handy self-cleaning mode that makes it easy to keep clean. It also offers fully manual variable speed control.

Why is smoke coming out of my blender?

Why does my Ninja Blender smoke? Blenders with heavy use will have worn out brushes over time. The brushes will arc, resulting in a burning smell and possibly some smoke. The carbon brushes are used in electric motors to transfer electricity to the armature inside the motor.

Does Blender autosave?

You can use Blender’s Auto Save feature to reduce the chance of losing files when such events occur. There are options to save a backup of your files like Auto Save that saves your file automatically over time, and Save on Quit, which saves your blend-file automatically when you exit Blender.

How do you update Blender?

Once on the store page, search for “Blender” in the search bar on the top right. Select Blender in the search results, and press the green free button to install it. Auto-updates will be automatically enabled after install.

The post How do I fix blender not spinning? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.