Likewise, Why is my TV aerial not working?

Faulty TV aerial could be the issue

If you have lost TV aerial signal, then the problem could be down to a faulty or broken tv aerial. Over time, aerials can become faulty due to weather conditions or because they were never correctly installed in the first place.

Also, How do you fix a computer that turns on but no display?

Try these fixes:

1. Check if your monitor is turned on.
2. Reconnect your monitor to your computer.
3. Disconnect your peripherals.
4. Reinstall your RAM.
5. Reset your BIOS settings to default.
6. Bonus tip: Update your device drivers.

Moreover, Why does my TV say no signal when HDMI is plugged in?

Verify that the source device has power and is turned on. If the source device is connected with an HDMI® cable: Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again. … Try a new or another known working HDMI cable.

Can RAM cause no signal?

Commonly 90% no display fault comes just because of a faulty RAM and in case if your RAM got dead, then there is nothing other than a new RAM stick can start your PC. In case, if you have two RAM Stick installed in your computer then you can try to remove one of them and then Turn ON your computer.

How do you know if your TV aerial is working?

Another way to check the TV aerial is to take the TV to a socket that you are sure is working correctly and perform a test. If the TV can get a signal and identify the channels on another socket, you can rest assured that your TV is fine.

How do I know if I need a new TV aerial?

If the picture of your TV keeps breaking up or freezing, if the sound keeps dropping out or if you struggle to get signal at all, you may be experiencing poor aerial signal.

What does it mean when your laptop turns on but the screen is black?

The laptop screen black occurs when there is a corrupted graphics driver or a problem with the LCD display back light. … If an image displays on the external monitor, there might be a graphics driver conflict with the notebook LCD display that leads to laptop screen black but still running.

Why my computer is on but the screen is black?

Some people get a black screen from an operating system problem, such as an incorrect display driver. … You don’t need to install anything—just run the disc until it displays a desktop; if the desktop displays, then you know your monitor black screen is caused by a bad video driver.

Can a bad PSU cause no display?

The insufficient power can cause the CPU and graphics card to render screen displays inconsistently. Additionally, the graphics card may turn off the monitor if there’s not enough power to render on-screen graphics. This is particularly common in multi-monitor setups.

Why does my TV say no signal when HDMI is plugged in PS4?

General HDMI Troubleshooting. Make sure the PS4 is connected to the correct HDMI port. … Try unplugging and re-plugging the HDMI cable in again to make sure you have a secure connection. If it’s connected to the correct port, you could switch it to another available port and try again.

How do I check if my RAM is faulty?

How to Test RAM With Windows Memory Diagnostic Tool

1. Search for “Windows Memory Diagnostic” in your start menu, and run the application. …
2. Select “Restart now and check for problems.” Windows will automatically restart, run the test and reboot back into Windows. …
3. Once restarted, wait for the result message.

How do I know if my RAM slots are not working?

Open your computer and check the slots through trial and error. The only way to check your motherboard’s memory slots is to place a working RAM stick into each one and see if your machine boots properly. Remove all RAM sticks and place one you know is functional into the first slot on your motherboard.

How can I fix my RAM problem?

Depending on what is causing the memory errors, you can try the following options:

1. Replace the RAM modules (most common solution)
2. Set default or conservative RAM timings.
3. Increase the RAM voltage levels.
4. Decrease the CPU voltage levels.
5. Apply BIOS update to fix incompatibility issues.
6. Flag the address ranges as ‘bad’

How can I get my TV in a room without aerial?

The obvious alternative to watching not trough a aerial is to watch it through a satellite dish instead. To watch satellite TV you will need a satellite dish and a satellite receiver, this is usually a satellite set top box but many TV’s have in built satellite tuners.

How do I check my Freeview signal strength?

Your location will determine where you get your TV signal from, and the channel line-up in your area. To check your Freeview coverage and available channels, just enter your postcode in our Freeview Channel Checker. When you set up your device, you’ll be asked to select your TV region.

How do you check aerial signal strength?

Turn your antenna signal meter ON, and tune-in the lowest broadcast channel for your area. Slowly rotate your antenna 360 degrees and stop at the highest antenna signal strength (usually indicated by LEDs). Use a compass to read the direction of the highest antenna signal and record the result.

How much does it cost to have a new TV aerial installed?

The average TV antenna installation cost in Australia ranges $60 to $80 an hour for a total of between $150 and just over $500. There are a variety of factors that can impact antenna installation prices.

How do I fix a black screen with cursor?

How do I fix the Windows 10 black screen with cursor error?

1. Update your drivers.
2. Use Windows Key + P shortcut to switch displays.
3. Uninstall your graphic card driver.
4. Disable onboard graphics from Device Manager.
5. Disable Dual monitor from BIOS / disable CPU Graphics Multi-Monitor.

How do I fix my black screen?

Troubleshoot black screen using clean boot

1. Open Start.
2. Search for msconfig and click the top result to open the System Configuration app.
3. Click the Services tab.
4. Check the Hide all Microsoft services option.
5. Check one of the services. …
6. Click the Apply button.
7. Click the OK button.
8. Restart the computer.

What do you do when your computer has a black screen?

How To Fix a Black Desktop Screen On Windows 10

1. Check for any loose connections.
2. Force the display to wake up.
3. Try a different monitor to check for a faulty video card.
4. Examine your computer’s motherboard for damage.
5. Repair or replace the monitor.
6. Boot into Safe Mode.
7. Reinstall Display Driver.

How do I fix my black screen?

Android device users should start by holding down the power button on your device for five to seven seconds, which should restart it. If the device hasn’t been charged, there might be a problem with its power cord, adapter, or even the electrical outlet. If the device has power, you may have a problem with the screen.

How do I fix the black screen of death on my computer?

Repair a Black Screen of Death in Safe Mode

1. Click Advanced options then Troubleshoot.
2. From here go to Advanced options > Startup Settings > Restart.
3. Select option 4, Enable Safe Mode.
4. Wait for Windows Safe Mode to start.
5. Once booted, press Windows + X.
6. In the Quick Link menu select Device Manager.

How do I fix my computer when the screen is black?

Troubleshoot black screen using clean boot

1. Open Start.
2. Search for msconfig and click the top result to open the System Configuration app.
3. Click the Services tab.
4. Check the Hide all Microsoft services option.
5. Check one of the services. …
6. Click the Apply button.
7. Click the OK button.
8. Restart the computer.

The post How do I fix no signal? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, How do I know if my TV aerial is working?

Another way to check the TV aerial is to take the TV to a socket that you are sure is working correctly and perform a test. If the TV can get a signal and identify the channels on another socket, you can rest assured that your TV is fine.

Also, Why has my TV aerial stopped working?

Faulty TV aerial could be the issue

If you have lost TV aerial signal, then the problem could be down to a faulty or broken tv aerial. Over time, aerials can become faulty due to weather conditions or because they were never correctly installed in the first place.

Moreover, Why is digital TV reception so bad?

A faulty amplifier is a very common cause of poor TV reception. The signal goes in fine and comes out awful. It’s a simple fix usually – replace the amplifier. … Another common reason that cause this is the constant disconnecting and connected of cables such as in wall plates which can break and ruin the TV signal.

Why does my TV say weak or no signal?

This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input. In some cases, if you are not receiving a signal on your TV, it could be a result of a service outage.

Why does my TV aerial not work?

There are lots of things that can go wrong with the aerial cable. These include but are not limited to physically break in the cable, waterlogged cables or cables that have had a very high current run through them, like from an electrical spike, electrical surge or lightning strike.

How can I get my TV in a room without aerial?

The obvious alternative to watching not trough a aerial is to watch it through a satellite dish instead. To watch satellite TV you will need a satellite dish and a satellite receiver, this is usually a satellite set top box but many TV’s have in built satellite tuners.

Does weather affect digital TV reception?

Even though the weather doesn’t affect television reception as badly as in the analog days, it can be affected by severe weather conditions such as storms and high winds. This is usually caused by impediments and fluctuations in your broadcast signal from things such as moving debris and trees.

How can I boost my digital TV signal?

Here are some tips for boosting a digital TV signal:

1. Move the antenna to new location or height, if you’re using an indoor antenna. …
2. Re-aim the antenna, if you’re using an outdoor antenna. …
3. Watch the signal strength meter on the digital-to-analog converter box or television as you move or aim the antenna.

How do I fix no signal?

1. Turn off your computer.
2. Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm. …
3. Reattach the cable running from your monitor to your PC. …
4. Replace your monitor with another monitor if possible. …
5. Open your PC case and locate your video card.

Do smart TVs need aerials?

If you wish to receive Freeview through your smart TV, you will also need an aerial to do so. However, since you have a smart television it should have internet TV services such as Netflix, Amazon, BBC iPlayer and more built in. You don’t require an aerial to watch these services.

Do old TV aerials still work?

All aerials are capable of receiving both analogue and digital TV signals and some do have characteristics that make them better for receiving a digital Freeview TV signal. However an old wideband aerial may provide a perfectly adequate digital Freeview TV signal without needing to be replaced.

Do you need an aerial for a TV with built in Freeview?

You do need an aerial to receive Freeview live on TV through the TV Guide but can also view certain channels on internet connected devices without one. If you already have an aerial, make sure the cables are undamaged and connected to the aerial point in your home.

How do I get my channels back on my TV?

Press the “Menu” button on your remote control. If you don’t have a remote, your TV should have a built-in “Menu” button. Find and select the “Channel Scan” option in your TV’s menu. This option is sometimes labeled “Rescan,” “Tune,” or “Auto-tune.”

Why is TV reception worse in winter?

Sometimes, high-altitude conditions cause high tropospheric air to cool more quickly than air near the ground. When that takes place, lower warm air gets trapped and there’s a border between cold and warm air layers. Broadcast signals can skip along the cold air layer and travel much farther than they normally could.

What affects digital TV signal quality?

Actual signal strength may vary based on a variety of factors, including, but not limited to, building construction, neighboring buildings and trees, weather, and specific reception hardware. Your signal strength may be significantly lower in extremely hilly areas.

What can interfere with digital TV reception?

Keep reading to learn the most common sources of OTA obstructions and interference so you can avoid them when possible.

• Common Sources of Over-the-Air TV Obstruction. …
• Mountains & Valleys. …
• Trees. …
• Large Buildings.
• Common Sources of Over-the-Air TV Interference. …
• LED Lightbulbs. …
• Weather.

Will a signal booster improve digital TV reception?

TV aerial amplifiers and signal boosters do work. They can help overcome signal losses because of cable resistance and because of the splitting of signals to multiple TV’s. They won’t however miraculously convert a poor or weak TV signal, into a good reliable signal. But when used right they can fix your signal issues.

Does aluminum foil boost antenna signal?

Wrapping aluminum foil around your antenna will basically increase the surface area and conductivity of the antenna to boost the signal that your TV receives from it.

What is wrong when monitor says No signal?

If Monitor Displays “NO SIGNAL” or “SELF TEST” – this means that your computer monitor is working properly but isn’t getting a signal from the computer. Start troubleshooting your issue by ensuring that both ends of the video cable that goes between your computer and your monitor are pushed in the whole way.

Why is my PC turning on but No signal?

Try to reseat the cable, which is unplugging and plugging the cable back again. If this does not work, use another similar cable or use other monitor connection ports. … Plug the monitor back in and check for if the computer turns on, but no signal to monitor the problem persists.

How do you fix a computer that turns on but no display?

Try these fixes:

1. Check if your monitor is turned on.
2. Reconnect your monitor to your computer.
3. Disconnect your peripherals.
4. Reinstall your RAM.
5. Reset your BIOS settings to default.
6. Bonus tip: Update your device drivers.

Do all smart TVs have Freeview built-in?

All new Smart TVs now have Freeview On Demand. There’re 2 types of Freeview On Demand you can access: Freeview On Demand built-in. Freeview On Demand Smart TV app.

How do I get Freeview on my TV without aerial?

How to Get Freeview On TV Without Aerial?

1. Plug your HDMI cable into your laptop.
2. Connect the other end of your cable to one of the HDMI ports on your television.
3. Go to TVCatchUp.com on your laptop.
4. Browse any of the available Freeview channels on the website.
5. Press play.

How do I connect my aerial to my Smart TV?

Plug in the TV and fit the batteries to the remote. Plug in the aerial and turn on the TV. If you have a smart TV you’ll be asked for your wi-fi network and password, so have these ready. You’ll then be asked to tune your TV to find the available Freeview channels.

The post How do I test my TV signal? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, How do I test my aerial signal?

Test Your TV Aerial Cable

Another way to check the TV aerial is to take the TV to a socket that you are sure is working correctly and perform a test. If the TV can get a signal and identify the channels on another socket, you can rest assured that your TV is fine.

Also, Why has my TV aerial stopped working?

Faulty TV aerial could be the issue

If you have lost TV aerial signal, then the problem could be down to a faulty or broken tv aerial. Over time, aerials can become faulty due to weather conditions or because they were never correctly installed in the first place.

Moreover, Why is digital TV reception so bad?

A faulty amplifier is a very common cause of poor TV reception. The signal goes in fine and comes out awful. It’s a simple fix usually – replace the amplifier. … Another common reason that cause this is the constant disconnecting and connected of cables such as in wall plates which can break and ruin the TV signal.

Why does my TV say weak or no signal?

This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input. In some cases, if you are not receiving a signal on your TV, it could be a result of a service outage.

Why does my TV aerial not work?

There are lots of things that can go wrong with the aerial cable. These include but are not limited to physically break in the cable, waterlogged cables or cables that have had a very high current run through them, like from an electrical spike, electrical surge or lightning strike.

How do I know if I need a new TV aerial?

If the picture of your TV keeps breaking up or freezing, if the sound keeps dropping out or if you struggle to get signal at all, you may be experiencing poor aerial signal.

How can I get my TV in a room without aerial?

The obvious alternative to watching not trough a aerial is to watch it through a satellite dish instead. To watch satellite TV you will need a satellite dish and a satellite receiver, this is usually a satellite set top box but many TV’s have in built satellite tuners.

Does weather affect digital TV reception?

Even though the weather doesn’t affect television reception as badly as in the analog days, it can be affected by severe weather conditions such as storms and high winds. This is usually caused by impediments and fluctuations in your broadcast signal from things such as moving debris and trees.

How can I boost my digital TV signal?

Here are some tips for boosting a digital TV signal:

1. Move the antenna to new location or height, if you’re using an indoor antenna. …
2. Re-aim the antenna, if you’re using an outdoor antenna. …
3. Watch the signal strength meter on the digital-to-analog converter box or television as you move or aim the antenna.

How do I fix no signal?

1. Turn off your computer.
2. Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm. …
3. Reattach the cable running from your monitor to your PC. …
4. Replace your monitor with another monitor if possible. …
5. Open your PC case and locate your video card.

How much does it cost to have a new TV aerial installed?

The average TV antenna installation cost in Australia ranges $60 to $80 an hour for a total of between $150 and just over $500. There are a variety of factors that can impact antenna installation prices.

How do I check my Freeview signal strength?

Your location will determine where you get your TV signal from, and the channel line-up in your area. To check your Freeview coverage and available channels, just enter your postcode in our Freeview Channel Checker. When you set up your device, you’ll be asked to select your TV region.

What kind of aerial do I need for Freeview?

An aerial

To get Freeview, you need an aerial in good condition, pointing in the right direction towards a transmitter. While indoor (loft or portable) aerials may pick up Freeview, for best results we recommend a roof aerial.

Do smart TVs need aerials?

If you wish to receive Freeview through your smart TV, you will also need an aerial to do so. However, since you have a smart television it should have internet TV services such as Netflix, Amazon, BBC iPlayer and more built in. You don’t require an aerial to watch these services.

Do old TV aerials still work?

All aerials are capable of receiving both analogue and digital TV signals and some do have characteristics that make them better for receiving a digital Freeview TV signal. However an old wideband aerial may provide a perfectly adequate digital Freeview TV signal without needing to be replaced.

Do you need an aerial for a TV with built in Freeview?

You do need an aerial to receive Freeview live on TV through the TV Guide but can also view certain channels on internet connected devices without one. If you already have an aerial, make sure the cables are undamaged and connected to the aerial point in your home.

Why is TV reception worse in winter?

Sometimes, high-altitude conditions cause high tropospheric air to cool more quickly than air near the ground. When that takes place, lower warm air gets trapped and there’s a border between cold and warm air layers. Broadcast signals can skip along the cold air layer and travel much farther than they normally could.

What affects digital TV signal quality?

Actual signal strength may vary based on a variety of factors, including, but not limited to, building construction, neighboring buildings and trees, weather, and specific reception hardware. Your signal strength may be significantly lower in extremely hilly areas.

What can interfere with digital TV reception?

Keep reading to learn the most common sources of OTA obstructions and interference so you can avoid them when possible.

• Common Sources of Over-the-Air TV Obstruction. …
• Mountains & Valleys. …
• Trees. …
• Large Buildings.
• Common Sources of Over-the-Air TV Interference. …
• LED Lightbulbs. …
• Weather.

Will a signal booster improve digital TV reception?

TV aerial amplifiers and signal boosters do work. They can help overcome signal losses because of cable resistance and because of the splitting of signals to multiple TV’s. They won’t however miraculously convert a poor or weak TV signal, into a good reliable signal. But when used right they can fix your signal issues.

Does aluminum foil boost antenna signal?

Wrapping aluminum foil around your antenna will basically increase the surface area and conductivity of the antenna to boost the signal that your TV receives from it.

How do you fix a computer that turns on but no display?

Try these fixes:

1. Check if your monitor is turned on.
2. Reconnect your monitor to your computer.
3. Disconnect your peripherals.
4. Reinstall your RAM.
5. Reset your BIOS settings to default.
6. Bonus tip: Update your device drivers.

Can RAM cause no signal?

Commonly 90% no display fault comes just because of a faulty RAM and in case if your RAM got dead, then there is nothing other than a new RAM stick can start your PC. In case, if you have two RAM Stick installed in your computer then you can try to remove one of them and then Turn ON your computer.

What does no input signal mean on TV?

This indicates that your TV is probably on the wrong input. The easiest way to do that is to use the remote control that came with the TV itself. … There may be a button on it called Input or Source, or it may have a row of buttons for each input type.

The post How do I test my TV signal? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, Why is my TV aerial not working?

Faulty TV aerial could be the issue

If you have lost TV aerial signal, then the problem could be down to a faulty or broken tv aerial. Over time, aerials can become faulty due to weather conditions or because they were never correctly installed in the first place.

Also, How can I get my TV in a room without aerial?

The obvious alternative to watching not trough a aerial is to watch it through a satellite dish instead. To watch satellite TV you will need a satellite dish and a satellite receiver, this is usually a satellite set top box but many TV’s have in built satellite tuners.

Moreover, How do I test my TV signal?

Turn your antenna signal meter ON, and tune-in the lowest broadcast channel for your area. Slowly rotate your antenna 360 degrees and stop at the highest antenna signal strength (usually indicated by LEDs). Use a compass to read the direction of the highest antenna signal and record the result.

How do I check my Freeview signal strength?

Your location will determine where you get your TV signal from, and the channel line-up in your area. To check your Freeview coverage and available channels, just enter your postcode in our Freeview Channel Checker. When you set up your device, you’ll be asked to select your TV region.

Do smart TVs need aerials?

If you wish to receive Freeview through your smart TV, you will also need an aerial to do so. However, since you have a smart television it should have internet TV services such as Netflix, Amazon, BBC iPlayer and more built in. You don’t require an aerial to watch these services.

Do old TV aerials still work?

All aerials are capable of receiving both analogue and digital TV signals and some do have characteristics that make them better for receiving a digital Freeview TV signal. However an old wideband aerial may provide a perfectly adequate digital Freeview TV signal without needing to be replaced.

Do you need an aerial for a TV with built in Freeview?

You do need an aerial to receive Freeview live on TV through the TV Guide but can also view certain channels on internet connected devices without one. If you already have an aerial, make sure the cables are undamaged and connected to the aerial point in your home.

Why is digital TV reception so bad?

A faulty amplifier is a very common cause of poor TV reception. The signal goes in fine and comes out awful. It’s a simple fix usually – replace the amplifier. … Another common reason that cause this is the constant disconnecting and connected of cables such as in wall plates which can break and ruin the TV signal.

Why does my TV say weak or no signal?

This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input. In some cases, if you are not receiving a signal on your TV, it could be a result of a service outage.

How do I know if my TV has Freeview built in?

If you’re unsure, please contact the manufacturer of your TV and provide the serial number / model number of your TV to find out if your flat-panel TV has Freeview|HD built-in. Contact details for manufacturers of Freeview Approved TVs can be found on the Approved Products page.

Why do I keep losing my Freeview signal?

Freeview reception problems can be caused by many things. For example a fault with your local transmitter, poor installation, the weather, being tuned to the wrong transmitter or (though rarely) interference. All will have a similar result of on screen pixellation or the sound breaking up.

How can I improve my Freeview signal?

Let’s crack on with how to improve your TV signal strength.

1. Install Your Aerial Outside. …
2. Install The Aerial Higher Up. …
3. Install A Higher Gain TV Aerial. …
4. Align Your TV Aerial For Peak Reception. …
5. Install A Masthead Amplifier. …
6. Remove Splitters – Install Distribution Amplifiers. …
7. Install Good Quality Coaxial Cable.

Do all smart TVs have Freeview built-in?

All new Smart TVs now have Freeview On Demand. There’re 2 types of Freeview On Demand you can access: Freeview On Demand built-in. Freeview On Demand Smart TV app.

How do I get Freeview on my TV without aerial?

How to Get Freeview On TV Without Aerial?

1. Plug your HDMI cable into your laptop.
2. Connect the other end of your cable to one of the HDMI ports on your television.
3. Go to TVCatchUp.com on your laptop.
4. Browse any of the available Freeview channels on the website.
5. Press play.

How do I connect my aerial to my Smart TV?

Plug in the TV and fit the batteries to the remote. Plug in the aerial and turn on the TV. If you have a smart TV you’ll be asked for your wi-fi network and password, so have these ready. You’ll then be asked to tune your TV to find the available Freeview channels.

Can I get rid of my TV aerial?

If your unused TV aerial is very old and it likes like you might need a new one and do not want the expense, then you can of course remove it.

Do I need a new TV aerial?

Remember, every TV broadcast in the United Kingdom uses digital signals since 2012, so almost any aerial made in the last decade or so will work. … So if your TV reception is spotty, and you’re planning to buy a new HD TV, I recommend upgrading the aerial too.

How can I tell if my TV has Freeview built-in?

If you’re unsure, please contact the manufacturer of your TV and provide the serial number / model number of your TV to find out if your flat-panel TV has Freeview|HD built-in. Contact details for manufacturers of Freeview Approved TVs can be found on the Approved Products page.

Do TVs have built-in aerials?

Do bear in mind that while most TVs are Freeview compatible, that does not mean you can watch Freeview on them without an aerial. You will always need to connect your TV to an aerial to receive Freeview broadcasts.

Do all TVs have Freeview built-in?

How can I get Freeview? TV: All new TVs (those made since 2010) have a built-in Freeview tuner, meaning you can access all the Freeview channels without needing extra equipment. More expensive TVs have Freeview HD tuners, meaning you can get the HD networks listed above, too.

Does weather affect digital TV reception?

Even though the weather doesn’t affect television reception as badly as in the analog days, it can be affected by severe weather conditions such as storms and high winds. This is usually caused by impediments and fluctuations in your broadcast signal from things such as moving debris and trees.

How can I boost my digital TV signal?

Here are some tips for boosting a digital TV signal:

1. Move the antenna to new location or height, if you’re using an indoor antenna. …
2. Re-aim the antenna, if you’re using an outdoor antenna. …
3. Watch the signal strength meter on the digital-to-analog converter box or television as you move or aim the antenna.

What can interfere with digital TV signal?

Keep reading to learn the most common sources of OTA obstructions and interference so you can avoid them when possible.

• Common Sources of Over-the-Air TV Obstruction. …
• Mountains & Valleys. …
• Trees. …
• Large Buildings.
• Common Sources of Over-the-Air TV Interference. …
• LED Lightbulbs. …
• Weather.

The post How do I know if my TV aerial is working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.