Likewise, Does a flat screen TV have a picture tube?

In the past decade LCDs and plasma displays have replaced the good old picture tube. They are much lighter and thinner because they do not have a big tube in them. LCD screens have liquid crystal layers that can be controlled by an electric current. Millions of pixels on these layers can be either switched on or off.

Also, How much is a picture tube for a Samsung TV?

Cost to Replace a TV Picture Tube

Picture tube replacements range from $200 to $300 on average. Picture tubes, also known as cathode ray tubes or CRTs, are only used in older TVs. So, this is not a replacement job you need to worry about with an LED or LCD TV.

Moreover, What are signs your TV is going out?

Dead pixels, colour distortion, bars and lines, and a fuzzy screen are some of the signs that your TV needs to be repaired. You should think about repairing or upgrading your television if you see any of these on it.

How do I know if my TV is LED or LCD?

While a standard LCD monitor uses fluorescent backlights, an LED monitor uses light-emitting diodes for backlights. LED monitors usually have superior picture quality, but they come in varying backlight configurations. And some backlight configurations create better images than others.

How do you fix a TV that wont show the picture?

–Reset ALL components by unplugging them for 5 minutes including the TV. -Be sure all COAX CABLES and HDMI CABLES are tight and properly connected. -If you CAN pull up the TV MENU when you have the black screen, update your TV’s firmware to be sure your TV is up to date and rule out the TV as the problem.

Is LED or crystal better?

LED stands for Light Emitting Diode while LCD is short for Liquid Crystal Display. … LEDs are also slimmer than LCDs and provide a better quality, clearer picture with high definition output.

Which is better LED or crystal TV?

LED TV. An LED TV uses less power, provides a brighter display with better contrast, a thinner panel, and lesser heat dissipation than a conventional LCD TV. This is because an LED TV uses light-emitting diodes for backlighting as opposed to the CCFLs of conventional LCD TVs.

How long does a Samsung TV last?

What’s the Average Lifespan of a Samsung TV? Samsung TVs have a lifespan that ranges between 4.5 and 7 years with heavy usage, just like many other TVs on the market. Heavy usage means the TV is running almost continuously, with brightness set at the highest possible level.

What is Samsung TV Black Screen of Death?

When the screen of your Samsung TV is blank and unresponsive, check the connections between the TV and the power source, the cable box, the DVD player and other auxiliary devices. Loose connections or inactive power sources are frequently the culprits behind unresponsive TVs.

Why is Screen Mirroring not working on my Samsung TV?

iPhone screen mirroring or AirPlay not working on Samsung TV

Make sure that both your iOS device and Samsung TV are connected to the same internet connection. Check both devices for the latest update. … Restart your iPhone and Samsung TV. Check your AirPlay settings and restriction.

How long does Samsung TV last?

What’s the Average Lifespan of a Samsung TV? Samsung TVs have a lifespan that ranges between 4.5 and 7 years with heavy usage, just like many other TVs on the market. Heavy usage means the TV is running almost continuously, with brightness set at the highest possible level.

How long do smart TVs last?

How Long do Smart TVs Generally Last? Smart TVs should last you almost seven (7) years at full power or while on the highest settings. You will most likely get more out of your device if you operate your TV at lower brightness.

How long do TVs last on average?

It is the lifespan of this light source that ultimately determines a TV’s longevity. Consequently, the average life expectancy of an LCD TV is between 30,000 – 60,000 hours or 5-7 years.

Which is better for eyes LCD or LED TV?

The LED have far better display panel in the prospective of eye safety, picture quality, and power consumption. … The regular LCDs use a cold fluorescent cathode display backlight, and the LED uses Light Emitting diodes. The LED backlighting is smaller and much safer for the eyes.

Which computer monitor is better LCD or LED?

LCD monitors also tend to offer a wider variety of viewing angles for better comfort. On the other hand, especially if you work long hours, LED monitors tend to offer better dimming options without sacrificing picture clarity.

Why can I hear my TV but the screen is black?

Unplug the HDMI from one input and plug it to a different input to test if a port is bad. … Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues.

Why is my TV on but the screen is black?

Check the Backlight

If the backlight burns out or stops working, the picture will appear black. To see if your TV’s backlight is causing the problem, make sure your TV is on, and turn off the lights in the room. Shine a flashlight on the screen to see if there’s a picture.

How long do Samsung TVs last?

What’s the Average Lifespan of a Samsung TV? Samsung TVs have a lifespan that ranges between 4.5 and 7 years with heavy usage, just like many other TVs on the market. Heavy usage means the TV is running almost continuously, with brightness set at the highest possible level.

What is the best backlight type for TV?

TVs with full-array backlighting have the most accurate local dimming and therefore tend to offer the best contrast. Since an array of LEDs spans the entire back of the LCD screen, regions can generally be dimmed with more finesse than on edge-lit TVs, and brightness tends to be uniform across the entire screen.

How do you tell if my TV is LED or LCD?

Check the front of the television for a sticker that indicates if it has an LED display. LED backlighting is a major selling point for many electronics manufacturers, so that fact is typically displayed on the front of a new television.

Is Smart TV better than LED?

With a smart TV, you’ll be able to do this and more on the big screen, thanks to built-in Wi-Fi and Ethernet ports. Your smart TV is essentially an LED TV with internet connection and the ability to connect seamlessly to various portable devices!

What’s the most reliable TV brand?

• The best TV for you: How much does brand matter?
• LG TVs: Best OLED TVs for movies and gaming and decent budget LED models for big groups.
• Samsung TVs: Best for bright rooms and unique sets.
• Sony TVs: Fantastic color accuracy and smooth motion for movies and sports.
• TCL TVs: Best smart TV platform at unbeatable prices.

Which is better Samsung or LG Smart TV?

Who is winning between LG and Samsung? LG manufactures OLED displays, which are considered to be the best in terms of color and contrast. Samsung still uses QLED technology, which can’t quite match OLED for picture quality. … Additionally, QLED is also brighter whereas OLED has better uniformity and viewing angles.

Which TV brand lasts the longest?

When it comes to durability and reliability, these four brands lead the pack: Samsung, Sony, LG, and Panasonic. Let’s take a closer look at why these TVs will serve you for a longer time than others.

The post Do smart TVs have picture tubes? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

1. Open Settings, and select Picture.
2. Select Expert Settings, and then select Reset Picture.
3. Select Yes to confirm.

Likewise, Why is my Samsung Smart TV pixelation?

Pixelation occurs when the incoming signal to your TV is weak or incomplete. As a result, the TV doesn’t have all the data it needs to process the image incorrectly, and pixelation occurs. … The causes of this problem usually stems from incomplete or incorrect digital or analog signals.

Also, How do I get my Samsung TV to full screen?

How can I Change the Picture Size of my Samsung TV?

1. Press the HOMEbutton on the remote.
2. Select ” Settings”
3. Select ” Picture”
4. Select ” Picture Size Settings”
5. Select ” Picture Size”
6. You can select the picture size displayed on the TV screen.

Moreover, How do I improve the picture quality on my Samsung Smart TV?

Enhance the Picture Quality on a Samsung TV.

1. Press the Home button on your Samsung remote control to bring up the Smart Hub/Eden Menu and then select. Settings.
2. In the. …
3. Highlight Picture Mode and press enter on your remote control and then select one of the options that appear.

What is the best picture mode for Samsung TV?

We recommend choosing the ‘Movie’ picture mode, as it’s the most accurate one out of the box, and allows for the most customization. From the Expert Settings menu, we recommend leaving the Contrast at ’45,’ and Sharpness at ‘0. ‘ We also left Color at the default value of ’25,’ and Tint (G/R) at ‘0.

How do I fix pixelation on my TV?

Reset the TV box

1. Power off the TV box.
2. Detach the power cable from the back of the unit, and from the wall outlet or power bar.
3. Wait 30 seconds and then reconnect the power cable to the unit and the power source.
4. Wait up to 2 minutes for the TV box to reboot.
5. Power on your TV box and test it again.

Why is my TV Pixelating on certain channels?

“High-definition digital is here and the high-volume use of combination antennas is unfortunate, as users suffer from pixelation, often on one channel, and in some cases it can be each channel,” Ms Garden says. “This is often a direct result of combination antennas. A diplex antenna is the better way to do the job.”

Why is my TV freezing and Pixelating?

General pixilation and freezing occurs when there is a disruption in the TV signal, or there is a weak signal altogether. … Make sure all cables connected on the set-top box and your TV are secure.

Why can’t I change the picture size on my Samsung Smart TV?

Changing Picture Size on Samsung TV

Press the Menu or Home button on your Smart TV’s remote. … On the Settings menu page, click Picture. Highlight Picture Size Settings and click it. Now, you should be able to choose between 4:3, 16:9, and Custom aspect ratio or picture sizes.

How do I set my TV to full screen?

Change the aspect settings to fit your TV:

1. Press MENU on your remote control.
2. Use the down arrow button to highlight Settings, press OK.
3. Use the down arrow button to highlight Television, press OK.
4. Select TV resolution, press OK.
5. Use the arrow buttons to select HD 720p, or HD 1080i or HD 1080p.
6. Press OK.

How do I make my Samsung Smart TV browser full screen?

Samsung smart tv browser in fullscreen mode

1. In the browser click in the upper right corner on the gear icon.
2. Go to “Browser Settings”
3. Go to the “General” sub-menu.
4. And then you have an option called “Hide menu” (“Masquer menu” in French) that you need to enable.

What is the best sound mode for Samsung TV?

Samsung – Recommended TV Audio Settings

What are the best settings for a Samsung TV?

Best Picture Settings for Samsung 4k UHD TV

How do I turn on 4k on my Samsung TV 2020?

Press the Home Button on your Samsung Smart Control, to access the Home Screen.

1. b). Using the Directional pad on your remote, navigate to and select Settings.
2. c). Select Picture.
3. d). Select Expert Settings.
4. e). Using the Down Directional button, scroll down the list until you reach HDMI UHD Color.
5. f). …
6. g). …
7. h). …
8. i).

Can a bad HDMI cable cause pixelation?

Can a bad HDMI cable cause pixelation or pixilation? Yes. If your HDMI cable is bad you’ll at best see artifacting and skipping from the signal of your digital video or at worst not get any signal to your HDTV at all. … Usually, the quick-fix solution to a bad HDMI cable is to replace it since they come in cheap enough.

How do I fix ghosting on my Samsung TV?

2 Answers

1. Try connecting the TV to a different source (e.g. change HDMI ports.) to identify whether the issue is with the TV or the source.
2. Power cycle both the TV and the source. …
3. Check to see if your TV has the latest version of the firmware. …
4. Reset the Picture Settings.

How do I get my TV screen back to normal size?

Change the aspect settings to fit your TV:

1. Press MENU on your remote control.
2. Use the down arrow button to highlight Settings, press OK.
3. Use the down arrow button to highlight Television, press OK.
4. Select TV resolution, press OK.
5. Use the arrow buttons to select HD 720p, or HD 1080i or HD 1080p.
6. Press OK.

What can interfere with TV signal?

Many household appliances like a blender, electric heater, popcorn maker, electric blanket, and refrigerators can also cause interference. Any appliance with electric motors like a ceiling fan can disrupt an over the air TV signal. In some cases, light dimmers have been known to cause issues due to poor wiring.

Can cell phone towers interfere with TV reception?

Yes, it’s true that LTE signals from local cell towers can interfere with TV antenna reception. This is because LTE is now carried on frequencies that used to be used for television, and so if an antenna isn’t designed to block those signals there can be problems.

Why is my Samsung TV freezing?

Most frozen smart TVs can be fixed by turning the television off, waiting a few minutes, and then turning it back on. Sometimes televisions freeze because the internet source is not working properly or there is an app that needs updating. Always check the Wi-Fi and app settings.

How do I unfreeze my TV screen?

Turn off your smart TV and and unplug it from the wall. While it’s unplugged, press and hold the TV’s power button for about 30 seconds. Next, release the power button and plug your smart TV back in and turn it on.

How do I get the picture off my Samsung TV?

How do I turn off my Samsung TV’s picture but not the sound?

1. 1 Press the Menu button on your remote.
2. 2 Select Picture.
3. 3 Scroll down to Picture Off.
4. 4 Select Picture Off.

Why is my Samsung TV zoomed in?

If you have a Samsung TV zoom problem, you may be trying to stream videos that use HD signals. When high-definition streaming is activated, the zoom function is disabled. If this isn’t the case, you can quickly adjust the zoom levels in your Picture settings using the controller.

The post How do I reset the picture on my Samsung Smart TV? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, Why does my Samsung TV have horizontal lines running through picture?

Honorable. a horizontal line (s) is usually an indication of a “bad panel” which isn’t economically repairable. Most of these kinds of sets use what are called “bonded tab” cables which is flat cabling “heat bonded” to the sides and bottom of the panel.

Also, How do I do a hard reset on my Samsung Smart TV?

Open Settings, and then select General. Select Reset, enter your PIN (0000 is the default), and then select Reset. To complete the reset, select OK. Your TV will restart automatically.

Moreover, How do I fix my Samsung Black Screen of Death?

Part 3: How to Fix your Samsung Galaxy Black Screen of Death

1. STEP 1: Soft Resetting. A soft reset involves restarting your Samsung Galaxy but includes the extra step of cutting off all power to the handset. …
2. STEP 2: Disable Dark screen mode. …
3. STEP 3: Disable/uninstall apps. …
4. STEP 4: Remove SD card.

How do I get rid of horizontal lines on my TV?

5 tips to get rid of stripes on your TV screen

1. Turn the TV off and on.
2. Check the video cables.
3. Switch between sources.
4. Update the software.
5. Reset the TV.

How do I fix horizontal lines on my screen?

Removing stripes on your screen

1. Turn the monitor off and on again.
2. Check the cables.
3. Adjust the resolution and try a different source.
4. Calibrate your screen.
5. Adjust the refresh rate.
6. Update the video card driver.

How do I fix the horizontal lines on my LED TV?

Restart by unplugging the power cord

1. Turn off the TV.
2. Unplug the power cord for two minutes, and then plug it back in.
3. Turn on the TV.
4. Check if it resolves the issue.

Does a Samsung TV have a reset button?

Hold down the “Exit” button for 12 seconds if you want to point the remote control at the TV. … The TV can be reset with the “enter” button on the remote control. The unit will stop operating.

How do I clear the cache on my Samsung Smart TV?

Here’s how to do it:

1. Tap the Home button on your Samsung smart TV’s remote control.
2. Go to Settings.
3. Select Apps.
4. Go to the System apps.
5. Choose the app you want to clear the cache with.
6. Tap on “Clear cache”.
7. Tap OK to confirm.

Why did my Samsung screen turn black?

If there is a critical system error causing the black screen, this should get your phone working again. … Depending on the model Android phone you have you may need to use some combination of buttons to force restart the phone, including: Press & hold the Home, Power, & Volume Down/Up buttons.

Why did my Samsung S21 screen go black?

If your Galaxy S21 is stuck on a black screen and won’t respond even after doing the forced restart, then it’s probably just due to a drained battery. If you’ve tried charging it and won’t charge, then it’s probably because the system stopped responding while the device powered down due to a drained battery.

Why is there Lines on my TV screen?

This is a common issue with many TVs. Vertical colored lines usually show on a TV screen when the T-Con board is not working properly. Many times this can simply be caused from wiring that is not securely fastened. Other times the T-Con Board itself may be faulty and need to be replaced.

What causes horizontal lines on TV?

A single set of horizontal lines could indicate damage, a graphics system failure, or loose internal video cables. Broken signals from cables or graphics hardware creates impurities in reproducing an image on an LCD screen, conditions that often manifest in the form of vertical or horizontal lines of color.

What causes moving horizontal lines on TV screen?

The cable TV connection to an audio system is a frequent cause of these problems, since TV sets don’t commonly have a ground connection of their own. The rate at which the bars move up the screen is due to the difference between the 59.93 Hz field rate and the 60 Hz line frequency.

Can you fix a TV screen with lines?

If your flat screen TV has the dreaded vertical lines, half of the screen has turned darker, the screen is cracked, or the screen is broken, this can be repaired but may cost more than you paid for the complete TV. If your screen is cracked or broken, you can try replacing the Screen, LCD, Plasma, or LED part.

Why does my laptop have horizontal lines on the screen?

The horizontal or vertical lines on the computer screen could be caused by various issues, ranging from outdated graphics card drivers, incorrect video cable connections to defective ribbon cables. You could enter the BIOS settings to determine whether it is a software-related or hardware-related problem.

Why are there lines on my TV screen?

A bad cable, or a cable that is not securely fastened to the input/output ports, can disrupt the signal and cause horizontal or vertical lines. Verify that the cable in use is secured correctly at both the external device and the TV.

How do I fix vertical lines on my Samsung TV?

Vertical lines can be a processing problem or a connection problem. Usually these are due to poor connections between the processing board and the panel. If you feel confident enough, remove the back from the set and then remove and re-insert the flat ribbon cables the go to the panel.

How do I reboot my Samsung Smart TV?

There are two ways to soft reset your TV. Press and hold the power button on your remote until the TV turns off and on again. This should only take about 5 seconds.

How can I reset my Samsung TV without a remote?

To reset a TV without a remote, first, you need to unplug the power cord from it, and then locate and press the ‘Power’ button and ‘Volume Down’ button on the TV at the same time. Without leaving these buttons, you need to plug the cord back in it.

How do I factory reset my Samsung TV without picture?

1. While the TV is On, press and hold the EXIT button on the Samsung remote control for 12 seconds. The standby light should blink the entire time without interruption.
2. The Factory Reset screen displays a warning message. Select OK to reset the TV.

How do I delete preinstalled apps on my Samsung Smart TV 2020?

Removing apps from these models will go like this:

1. Hold the colored button on your remote control and click on ‘Featured. …
2. Choose ‘Apps. …
3. Then, click on ‘Options’ in the upper right corner of the screen.
4. Choose ‘Delete My Apps. …
5. Select the apps you want to remove and click on ‘Delete’ in the upper corner of the screen.

Why is my Samsung Smart TV so slow?

Your Smart TV uses memory just like your phone or PC. The more apps you run on your TV, the more memory your TV uses and when the memory gets low, the TV can start to run a little slow. … Check to see if your TV has any software updates available. Updating the software on your TV could help it run smoother as well.

Why is my Samsung TV internet so slow?

If you are a wireless router user and your router and Samsung smart TV are too distant from each other, then this may cause the issues of slow Internet. A Samsung Smart TV shows better performance when it is at a minimal distance from the router.

The post What is Samsung TV Black Screen of Death? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Likewise, How do I fix pixelation on my TV?

Reset the TV box

1. Power off the TV box.
2. Detach the power cable from the back of the unit, and from the wall outlet or power bar.
3. Wait 30 seconds and then reconnect the power cable to the unit and the power source.
4. Wait up to 2 minutes for the TV box to reboot.
5. Power on your TV box and test it again.

Also, Why is my TV Pixelating on certain channels?

“High-definition digital is here and the high-volume use of combination antennas is unfortunate, as users suffer from pixelation, often on one channel, and in some cases it can be each channel,” Ms Garden says. “This is often a direct result of combination antennas. A diplex antenna is the better way to do the job.”

Moreover, Why is my TV freezing and Pixelating?

General pixilation and freezing occurs when there is a disruption in the TV signal, or there is a weak signal altogether. … Make sure all cables connected on the set-top box and your TV are secure.

Can a bad HDMI cable cause pixelation?

Can a bad HDMI cable cause pixelation or pixilation? Yes. If your HDMI cable is bad you’ll at best see artifacting and skipping from the signal of your digital video or at worst not get any signal to your HDTV at all. … Usually, the quick-fix solution to a bad HDMI cable is to replace it since they come in cheap enough.

What can interfere with TV signal?

Many household appliances like a blender, electric heater, popcorn maker, electric blanket, and refrigerators can also cause interference. Any appliance with electric motors like a ceiling fan can disrupt an over the air TV signal. In some cases, light dimmers have been known to cause issues due to poor wiring.

Can cell phone towers interfere with TV reception?

Yes, it’s true that LTE signals from local cell towers can interfere with TV antenna reception. This is because LTE is now carried on frequencies that used to be used for television, and so if an antenna isn’t designed to block those signals there can be problems.

What can interfere with digital TV signal?

Keep reading to learn the most common sources of OTA obstructions and interference so you can avoid them when possible.

• Common Sources of Over-the-Air TV Obstruction. …
• Mountains & Valleys. …
• Trees. …
• Large Buildings.
• Common Sources of Over-the-Air TV Interference. …
• LED Lightbulbs. …
• Weather.

Why is my Samsung TV freezing?

Most frozen smart TVs can be fixed by turning the television off, waiting a few minutes, and then turning it back on. Sometimes televisions freeze because the internet source is not working properly or there is an app that needs updating. Always check the Wi-Fi and app settings.

How do I unfreeze my TV screen?

Turn off your smart TV and and unplug it from the wall. While it’s unplugged, press and hold the TV’s power button for about 30 seconds. Next, release the power button and plug your smart TV back in and turn it on.

Why does Channel 7 have bad reception?

The most likely explanation is that your house is on the edge of a “digital cliff”, which is right on the perimeter of the signal for your area. … (i.e. — TV signals bounce off the boundary between warm and cooler air layers. At night, this boundary becomes less distinct, which results in a drop in reception quality.)

What are symptoms of a bad HDMI cable?

Common problems include:

• No picture.
• Fuzzy or blurry picture.
• Discolored picture.
• Intermittent picture.
• Poor screen resolution.
• No sound.

Can a bad cable box cause pixelation?

Poor Quality Cables

Problems within a cable — such as fraying, exposure to the elements or crimping — damage the signal as it travels from the cable box to your set, leading to problems ranging from pixelation to poor audio to a choppy pixel.

Why do I get interference on my smart TV?

This is usually caused by electrical interference through your cabling, stemming from items like your Fridge, Microwave or Air Conditioner. If this is the case, investing in a good quality Power Board with an electrical noise Filter would be the way to go.

Why is the reception so bad on my TV?

More often than not, poor reception is simply the result of poor or disconnected wiring. Checking your cables should always be the first step in ascertaining the cause of the problem. Whenever you experience any issues with your signal, make sure that all of the cables are connected securely.

Why is my TV suddenly saying no signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

Can WiFi interfere with TV signal?

Can WIFI Affect TV Signals? Wireless devices do affect the performance of your TV signals. … Signals often drop due to how close the antenna cable is to the HDMI cable. Keep in mind your router antenna only affects signals if it’s too close.

How do I stop 4g interference on my TV?

If mobile upgrades are causing interference, it can usually be resolved by fitting a filter between your aerial cable and TV. This filter blocks the mobile signals from interfering with your equipment allowing you to continue watching Freeview as normal. These filters are provided for free.

Can Wifi interfere with TV signal?

Can WIFI Affect TV Signals? Wireless devices do affect the performance of your TV signals. … Signals often drop due to how close the antenna cable is to the HDMI cable. Keep in mind your router antenna only affects signals if it’s too close.

Does weather affect digital TV reception?

Even though the weather doesn’t affect television reception as badly as in the analog days, it can be affected by severe weather conditions such as storms and high winds. This is usually caused by impediments and fluctuations in your broadcast signal from things such as moving debris and trees.

Do weather conditions affect digital TV reception?

TV and radio signals, both analogue and digital, can be affected by atmospheric conditions, including high air pressure (which brings fine weather), heavy rain or snow. … Reception will return to normal once the weather changes.

How do I fix my Samsung TV from freezing?

If you have an app that is freezing, not loading, missing, or crashing, you should:

1. Cold boot the TV.
2. Update the TV’s software.
3. Delete the app from the TV and download it again.
4. Reset Smart Hub on your TV.

How do you unfreeze a Samsung TV?

Unplug the TV from the wall outlet and leave it unplugged for 2 minutes. With it still unplugged press and hold the power button (on the TV itself) for a full 30 seconds to drain all the power from the TV’s mainboard. Then, release the power button and plug the TV back in and turn it back on.

How do I clear memory on my Samsung TV?

1. Press the Home button on your remote control and select Broadcasting.
2. Select Expert Settings.
3. Select HbbTV Settings.
4. Select Delete Browsing Data and follow the prompts to clear any saved data on your television.

The post Why is my Samsung Smart TV pixelation? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.