Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Likewise, How do I reboot my Samsung Smart TV without the remote?

To reset a TV without a remote, first, you need to unplug the power cord from it, and then locate and press the ‘Power’ button and ‘Volume Down’ button on the TV at the same time. Without leaving these buttons, you need to plug the cord back in it.

Also, How do I fix my TV remote sensor not working?

Follow the steps below to troubleshoot this issue:

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

Moreover, What do you do if your TV remote stops working?

Section B: Checking items of the remote control (common)

1. Make sure none of the remote buttons are jammed.
2. Reset the remote. …
3. Clean the remote control terminals. …
4. Replace with fresh batteries. …
5. Perform a power reset on the TV. …
6. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.

Does a Samsung TV have a reset button?

Hold down the “Exit” button for 12 seconds if you want to point the remote control at the TV. … The TV can be reset with the “enter” button on the remote control. The unit will stop operating.

How do you unlock a Samsung TV without the remote?

You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.

Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Why will my TV remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

Why won’t my remote connect to my TV?

Unplug all cables and accessories from the TV such as: … Switch the TV back ON with the remote control. If the TV does not respond, press the button/joystick on the TV to switch the TV ON. If the TV starts up and the remote control is functional again, the external devices can be connected to the TV again, one by one.

Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

How do I get my TV remote to work?

TV remote controls work in a similar way but using a type of light called infrared (or IR for short). The remote control has an LED light in it which flashes really quickly to emit a message which is then picked up by the TV. The remote is called the transmitter, and the TV is called the receiver.

How do you reboot a Samsung TV?

With the Remote: For most people, the easiest way is to hold down the Power button on the Samsung TV remote until the TV turns off and on again. This should only take about 5 seconds.

How do I do a hard reset on my Samsung Smart TV?

1 Factory Reset

1. Power on your TV.
2. Press the Menu button.
3. Select Support, then Enter.
4. Choose Self Diagnosis, then Enter.
5. Select Reset, then Enter.
6. Enter your Security PIN. …
7. The factory reset screen will show a warning message. …
8. During the process, TV may turn off and on and will display the Setup screen.

How do I turn my TV on without a remote?

To turn on your TV without the remote, just walk over to the TV and hit the power button.

1. Read through any manuals that came with your television if you still have them.
2. Check if your TV has a visible touch power button. …
3. Check the the left and right sides and the top of your TV, some TVs have power buttons there.

How do you unlock your TV?

How to Unlock a TV

1. Turn on the TV and grab the remote. …
2. Look at the screen. …
3. Unlock all of the channels on the TV by entering the factory reset code. …
4. Call the technical support service number in your owner’s manual if none of those codes work. …
5. Take your television to a TV repair shop.

How do I fix an unresponsive remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

How do I get my remote to change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

How do I fix my directv remote that won’t change channels?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do I get my directv remote to change channels?

Make sure your remote is paired with your receiver.

1. Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
2. Press and hold MUTE and ENTER at the same time on your remote.
3. The screen displays Applying IR/RF Setup. The remote is synced.

How do I pair my Samsung remote to my TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

How do I sync my Samsung remote to my TV?

Here’s how you can pair up your Samsung Smart TV with your Smart remote:

1. Flip the remote. Take the remote and turn it to the other side. …
2. Locate the down arrow. …
3. Insert batteries. …
4. Aim the IR sensor. …
5. Press any button. …
6. Wait for pairing to finish. …
7. Press the Return and Extra buttons simultaneously. …
8. Wait for pairing to finish.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

Why won’t my Samsung remote change the channel?

If you cannot change channels on your Samsung smart TV, first double-check to ensure your Samsung remote is programmed with your cable box. If afterward, you have confirmed your remote and cable box are connected, you will need to reset your remote.

The post Why is my remote not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Likewise, How do I fix an unresponsive remote?

NOTE: Because each of these steps represents a possible solution, check the function of the remote control after completing each step.

1. Make sure none of the remote buttons are jammed.
2. Reset the remote. …
3. Clean the remote control terminals. …
4. Replace with fresh batteries. …
5. Perform a power reset on the TV.

Also, How do I fix my TV remote sensor not working?

Follow the steps below to troubleshoot this issue:

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

Moreover, What do you do if your TV remote stops working?

Section B: Checking items of the remote control (common)

1. Make sure none of the remote buttons are jammed.
2. Reset the remote. …
3. Clean the remote control terminals. …
4. Replace with fresh batteries. …
5. Perform a power reset on the TV. …
6. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.

Do remote controls wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Why will my TV remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

Why won’t my remote connect to my TV?

Unplug all cables and accessories from the TV such as: … Switch the TV back ON with the remote control. If the TV does not respond, press the button/joystick on the TV to switch the TV ON. If the TV starts up and the remote control is functional again, the external devices can be connected to the TV again, one by one.

Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

How do I get my TV remote to work?

TV remote controls work in a similar way but using a type of light called infrared (or IR for short). The remote control has an LED light in it which flashes really quickly to emit a message which is then picked up by the TV. The remote is called the transmitter, and the TV is called the receiver.

How long does a Samsung remote last?

Correction: The article originally stated that the remote had a lifespan of two years, due to Samsung’s marketing materials saying that it “can be used for up to two years.” The company has clarified that in fact, the internal battery can last for up to seven years to align with the average life cycle of a TV.

How do I know if my remote control sensor is working?

Look at the viewfinder or screen of your camera/camcorder or mobile phone. If the remote control sends a signal, you should see a light in the viewfinder or screen of your camera/camcorder or mobile phone when you press a button on the remote control.

How do I get my remote to change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

How do I fix my directv remote that won’t change channels?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

Why won’t my Samsung remote change the channel?

If you cannot change channels on your Samsung smart TV, first double-check to ensure your Samsung remote is programmed with your cable box. If afterward, you have confirmed your remote and cable box are connected, you will need to reset your remote.

How do I get my directv remote to change channels?

Make sure your remote is paired with your receiver.

1. Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
2. Press and hold MUTE and ENTER at the same time on your remote.
3. The screen displays Applying IR/RF Setup. The remote is synced.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

How do I pair my Samsung remote to my TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

How do I sync my Samsung remote to my TV?

Here’s how you can pair up your Samsung Smart TV with your Smart remote:

1. Flip the remote. Take the remote and turn it to the other side. …
2. Locate the down arrow. …
3. Insert batteries. …
4. Aim the IR sensor. …
5. Press any button. …
6. Wait for pairing to finish. …
7. Press the Return and Extra buttons simultaneously. …
8. Wait for pairing to finish.

What blocks remote control?

Covering the IR sensor or transmitter with a piece of tape coated with nail polish is just a more deliberate way to block the IR remote control signals.

Can you use any TV remote on any TV?

A Universal TV remote will work with any device model for almost all manufacturers and may be compatible with multiple devices. A remote control app is also a good option as they are available from most manufacturers and can be operated via a smartphone or tablet.

What is the range of a TV remote?

All IR remotes use the infrared frequency range (300 mHz – 400 gHz). This range should not be confused with the modulation rate (carrier frequency) of the remote control.

The post Why is my remote not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Likewise, How do I fix an unresponsive remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

Also, How do I fix my TV remote sensor not working?

Follow the steps below to troubleshoot this issue:

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

Moreover, What do you do if your TV remote stops working?

Section B: Checking items of the remote control (common)

1. Make sure none of the remote buttons are jammed.
2. Reset the remote. …
3. Clean the remote control terminals. …
4. Replace with fresh batteries. …
5. Perform a power reset on the TV. …
6. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.

Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Why will my TV remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

Why won’t my remote connect to my TV?

Unplug all cables and accessories from the TV such as: … Switch the TV back ON with the remote control. If the TV does not respond, press the button/joystick on the TV to switch the TV ON. If the TV starts up and the remote control is functional again, the external devices can be connected to the TV again, one by one.

How do I get my TV remote to work?

TV remote controls work in a similar way but using a type of light called infrared (or IR for short). The remote control has an LED light in it which flashes really quickly to emit a message which is then picked up by the TV. The remote is called the transmitter, and the TV is called the receiver.

How do I get my remote to change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

How do I fix my directv remote that won’t change channels?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do I know if my remote control sensor is working?

Look at the viewfinder or screen of your camera/camcorder or mobile phone. If the remote control sends a signal, you should see a light in the viewfinder or screen of your camera/camcorder or mobile phone when you press a button on the remote control.

How do I know if my remote sensor is working?

To check if your IR Remote is sending a signal, follow the steps below:

1. Pick a device to use: Digital Camera – turn the camera on. …
2. Point the end of the remote control with the IR emitter at the camera or camcorder lens.
3. Look at the viewfinder or LCD screen.
4. Press and hold one of the buttons on the remote control.

Why won’t my Samsung remote change the channel?

If you cannot change channels on your Samsung smart TV, first double-check to ensure your Samsung remote is programmed with your cable box. If afterward, you have confirmed your remote and cable box are connected, you will need to reset your remote.

How do I get my directv remote to change channels?

Make sure your remote is paired with your receiver.

1. Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
2. Press and hold MUTE and ENTER at the same time on your remote.
3. The screen displays Applying IR/RF Setup. The remote is synced.

How do I pair my Samsung remote to my TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

How do I sync my Samsung remote to my TV?

Here’s how you can pair up your Samsung Smart TV with your Smart remote:

1. Flip the remote. Take the remote and turn it to the other side. …
2. Locate the down arrow. …
3. Insert batteries. …
4. Aim the IR sensor. …
5. Press any button. …
6. Wait for pairing to finish. …
7. Press the Return and Extra buttons simultaneously. …
8. Wait for pairing to finish.

What blocks remote control?

Covering the IR sensor or transmitter with a piece of tape coated with nail polish is just a more deliberate way to block the IR remote control signals.

Can you use any TV remote on any TV?

A Universal TV remote will work with any device model for almost all manufacturers and may be compatible with multiple devices. A remote control app is also a good option as they are available from most manufacturers and can be operated via a smartphone or tablet.

What is the range of a TV remote?

All IR remotes use the infrared frequency range (300 mHz – 400 gHz). This range should not be confused with the modulation rate (carrier frequency) of the remote control.

How do I get my Samsung remote to change channels?

Point your remote at the cable box and press “power.” Your remote should now be programmed to the cable box and be able to change your channels.

The post Why is my remote not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Likewise, How do I fix my TV remote not working?

Section B: Checking items of the remote control (common)

1. Make sure none of the remote buttons are jammed.
2. Reset the remote. …
3. Clean the remote control terminals. …
4. Replace with fresh batteries. …
5. Perform a power reset on the TV. …
6. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.

Also, Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

Moreover, Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Can I fix my TV remote?

Most fixes are easy . . . if you can get the remote apart.

Most of the time you can fix your TV remote yourself with a simple repair kit and avoid the high cost of a replacement.

How do I get my remote to change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

How do I fix my directv remote that won’t change channels?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

Why won’t my Samsung remote change the channel?

If you cannot change channels on your Samsung smart TV, first double-check to ensure your Samsung remote is programmed with your cable box. If afterward, you have confirmed your remote and cable box are connected, you will need to reset your remote.

Do remote controls wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

How do I get my Samsung remote to change channels?

Point your remote at the cable box and press “power.” Your remote should now be programmed to the cable box and be able to change your channels.

How do I resync my directv remote to my TV?

Press Menu. Select Settings & Help > Settings > Remote Control > Program Remote. Select the device you want to pair and follow the on-screen instructions to complete the process. Your remote should now be paired and ready to go!

How do you reset a directv remote to a new TV?

To reset DIRECTV remotes to their default factory settings, press and hold the MUTE and SELECT buttons until the remote’s light flashes three times. Then, enter 981 and press SELECT. The remote will flash four times to let you know it has been reset.

How do I sync my Samsung remote to my TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do I pair my remote to my Samsung Smart TV 2012?

Here’s how you can pair up your Samsung Smart TV with your Smart remote:

1. Flip the remote. Take the remote and turn it to the other side. …
2. Locate the down arrow. …
3. Insert batteries. …
4. Aim the IR sensor. …
5. Press any button. …
6. Wait for pairing to finish. …
7. Press the Return and Extra buttons simultaneously. …
8. Wait for pairing to finish.

How do I get my DirecTV remote to change channels?

Make sure your remote is paired with your receiver.

1. Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
2. Press and hold MUTE and ENTER at the same time on your remote.
3. The screen displays Applying IR/RF Setup. The remote is synced.

How long does a Samsung remote last?

Correction: The article originally stated that the remote had a lifespan of two years, due to Samsung’s marketing materials saying that it “can be used for up to two years.” The company has clarified that in fact, the internal battery can last for up to seven years to align with the average life cycle of a TV.

How do I know if my remote control sensor is working?

Look at the viewfinder or screen of your camera/camcorder or mobile phone. If the remote control sends a signal, you should see a light in the viewfinder or screen of your camera/camcorder or mobile phone when you press a button on the remote control.

How can I turn my TV on without the power button or the remote?

To turn on your TV without the remote, just walk over to the TV and hit the power button.

1. Read through any manuals that came with your television if you still have them.
2. Check if your TV has a visible touch power button. …
3. Check the the left and right sides and the top of your TV, some TVs have power buttons there.

How do I turn my Samsung TV on without the remote?

When facing the TV, certain models have the TV Controller on back of the TV in the bottom right corner. The control stick toggles up and down as well as side to side – the menu options will appear on the TV screen when you press the center button. Long press the center button to turn the TV on or off.

How do I program a directv remote control?

On your remote, press and hold the MUTE and SELECT buttons. Stop when the green light at the top blinks twice. Enter the appropriate manufacturer’s code. If you don’t see your TV or device listed, use the code lookup tool to find the 5-digit code.

Why is my directv volume not working?

The cause of the sound issues may be the remote control or audio/visual cables. Press volume up on the remote control. If the volume doesn’t respond, you may need to program the remote control. Learn how to program your remote control.

How do you program a directv remote to a Samsung TV?

Use a Genie remote with a DIRECTV Ready or DIRECTV 4K Ready TV

1. Press and hold the MUTE and SELECT buttons on your Genie remote control.
2. Wait for the green LED light on the remote to flash twice.
3. Enter the appropriate manufacturer’s code: For Samsung DIRECTV Ready or DIRECTV Ready 4K TVs, enter 54000. …
4. Follow the prompts.

The post Why is my remote not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.