Likewise, How do I reset my Samsung TV without a remote?

To reset a TV without a remote, first, you need to unplug the power cord from it, and then locate and press the ‘Power’ button and ‘Volume Down’ button on the TV at the same time. Without leaving these buttons, you need to plug the cord back in it.

Also, Why is my remote not working?

1 Check the Batteries of the Supplied Remote

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Moreover, Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

Does Samsung Smart TV have a reset button?

Hold down the “Exit” button for 12 seconds if you want to point the remote control at the TV. … The TV can be reset with the “enter” button on the remote control. The unit will stop operating.

How do I do a hard reset on my Samsung Smart TV?

1 Factory Reset

1. Power on your TV.
2. Press the Menu button.
3. Select Support, then Enter.
4. Choose Self Diagnosis, then Enter.
5. Select Reset, then Enter.
6. Enter your Security PIN. …
7. The factory reset screen will show a warning message. …
8. During the process, TV may turn off and on and will display the Setup screen.

How do you unlock a Samsung TV without the remote?

You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.

How do I fix my TV remote sensor not working?

Follow the steps below to troubleshoot this issue:

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

How do I get my remote to change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

How do I fix my directv remote that won’t change channels?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do I get my directv remote to change channels?

Change the channel using the channel up/down buttons on the receiver. If you can change channels on the receiver, change the batteries in your remote. If you can’t change channels from the receiver, turn it off and unplug it. After at least 15 seconds, plug the receiver back in and turn it on.

Where is reset button on Samsung Smart TV?

Samsung TV factory reset and self diagnosis tools

1. Open Settings, and then select General.
2. Select Reset, enter your PIN (0000 is the default), and then select Reset.
3. To complete the reset, select OK. …
4. If these steps don’t match your TV, navigate to Settings, select Support, and then select Self Diagnosis.

How do you reboot a Samsung TV?

If something really weird is happening, try this: with the TV on, press and hold the power button on your Samsung TV remote until the TV turns off and back on. When the TV comes back on, everything should be back to normal.

What to do if your Samsung Smart TV won’t connect to WIFI?

Navigate to Settings > General > Network > Network Settings > Wireless and see if your network is listed. If your network is not listed, but you see other networks listed, then you know the wireless card in the TV is working.

How do I connect my remote to my Samsung TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do I turn my TV on without a remote?

To turn on your TV without the remote, just walk over to the TV and hit the power button.

1. Read through any manuals that came with your television if you still have them.
2. Check if your TV has a visible touch power button. …
3. Check the the left and right sides and the top of your TV, some TVs have power buttons there.

How do I know if my remote sensor is working?

Look at the viewfinder or screen of your camera/camcorder or mobile phone. If the remote control sends a signal, you should see a light in the viewfinder or screen of your camera/camcorder or mobile phone when you press a button on the remote control.

How do I know if my remote control sensor is working?

To check if your IR Remote is sending a signal, follow the steps below:

1. Pick a device to use: Digital Camera – turn the camera on. …
2. Point the end of the remote control with the IR emitter at the camera or camcorder lens.
3. Look at the viewfinder or LCD screen.
4. Press and hold one of the buttons on the remote control.

How do you fix a stuck TV on one channel?

Unplug the screw on coax cord from the TV, and it should stop power cycling. Once it has stopped, while the coax cord is disconnected, run the channel scan to erase the previous channel listing. Once that scan completes, reattach the coax cord, and rerun the channel scan to find the current frequencies.

Why is my DIRECTV receiver not connecting?

Unplug your receiver

Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do I get my directv remote to work?

Press the MENU button on the remote. Go to Settings & Help, then Settings, then Remote Control then Program Remote. Choose the device you want to the remote to control. Follow the on-screen instructions to finish programming your remote.

How do I sync my directv Genie remote to my TV?

Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. Press and hold the MUTE and ENTER buttons. Stop when the green light at the top of the remote blinks twice. When the TV screen displays Applying IR/RF setup, you are in RF mode and ready to program the remote.

The post How do I fix an unresponsive remote? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Likewise, How do I hard reset my Samsung Smart TV?

If something really weird is happening, try this: with the TV on, press and hold the power button on your Samsung TV remote until the TV turns off and back on. When the TV comes back on, everything should be back to normal.

Also, How do I fix my TV remote not working?

Section B: Checking items of the remote control (common)

1. Make sure none of the remote buttons are jammed.
2. Reset the remote. …
3. Clean the remote control terminals. …
4. Replace with fresh batteries. …
5. Perform a power reset on the TV. …
6. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.

Moreover, How do I fix my TV remote sensor not working?

Follow the steps below to troubleshoot this issue:

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

Does a Samsung TV have a reset button?

Hold down the “Exit” button for 12 seconds if you want to point the remote control at the TV. … The TV can be reset with the “enter” button on the remote control. The unit will stop operating.

How do you unfreeze a Samsung TV?

Unplug the TV from the wall outlet and leave it unplugged for 2 minutes. With it still unplugged press and hold the power button (on the TV itself) for a full 30 seconds to drain all the power from the TV’s mainboard. Then, release the power button and plug the TV back in and turn it back on.

How do you reboot a Samsung TV?

There are two ways to soft reset your TV. Press and hold the power button on your remote until the TV turns off and on again. This should only take about 5 seconds.

Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Can I fix my TV remote?

Most fixes are easy . . . if you can get the remote apart.

Most of the time you can fix your TV remote yourself with a simple repair kit and avoid the high cost of a replacement.

How do I know if my remote sensor is working?

Look at the viewfinder or screen of your camera/camcorder or mobile phone. If the remote control sends a signal, you should see a light in the viewfinder or screen of your camera/camcorder or mobile phone when you press a button on the remote control.

How do I know if my remote control sensor is working?

To check if your IR Remote is sending a signal, follow the steps below:

1. Pick a device to use: Digital Camera – turn the camera on. …
2. Point the end of the remote control with the IR emitter at the camera or camcorder lens.
3. Look at the viewfinder or LCD screen.
4. Press and hold one of the buttons on the remote control.

How do I reboot my Samsung Smart TV without the remote?

To reset a TV without a remote, first, you need to unplug the power cord from it, and then locate and press the ‘Power’ button and ‘Volume Down’ button on the TV at the same time. Without leaving these buttons, you need to plug the cord back in it.

What to do if your Samsung Smart TV won’t connect to WIFI?

Navigate to Settings > General > Network > Network Settings > Wireless and see if your network is listed. If your network is not listed, but you see other networks listed, then you know the wireless card in the TV is working.

What causes your TV to freeze up?

General pixilation and freezing occurs when there is a disruption in the TV signal, or there is a weak signal altogether. Check your connections: … Wait for the signal to initialize. Make sure all cables connected on the set-top box and your TV are secure.

How do I fix my directv remote that won’t change channels?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

Can t get directv remote to change channels?

If you can change channels on the receiver, change the batteries in your remote. If you can’t change channels from the receiver, turn it off and unplug it. After at least 15 seconds, plug the receiver back in and turn it on. Again, try changing channels from the receiver itself.

Do remote controls wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

How do I get my remote to change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

How do I check the remote control sensor on a TV?

You can use the TV’s stock remote control to check if the TV’s IR port is working by using the remote to turn the set on or off. The TV’s IR port works if it responds to remote commands. The TV needs to be powered for the test to work. Try installing new batteries in the remote control before testing.

Do TV remote controls wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

How do you test a remote control sensor?

To check if your IR Remote is sending a signal, follow the steps below:

1. Pick a device to use: Digital Camera – turn the camera on. …
2. Point the end of the remote control with the IR emitter at the camera or camcorder lens.
3. Look at the viewfinder or LCD screen.
4. Press and hold one of the buttons on the remote control.

Can the remote sensor on a TV go bad?

A remote sensor that can no longer register the IR signal from the remote control is not necessarily defective, as there are a number of things that can cause it to not see the IR signal. You can fix a remote sensor that is not registering the IR signal using a few common household items.

The post Why is my remote not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Likewise, How do I fix an unresponsive remote?

NOTE: Because each of these steps represents a possible solution, check the function of the remote control after completing each step.

1. Make sure none of the remote buttons are jammed.
2. Reset the remote. …
3. Clean the remote control terminals. …
4. Replace with fresh batteries. …
5. Perform a power reset on the TV.

Also, How do I fix my TV remote sensor not working?

Follow the steps below to troubleshoot this issue:

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

Moreover, Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Can I fix my TV remote?

Most fixes are easy . . . if you can get the remote apart.

Most of the time you can fix your TV remote yourself with a simple repair kit and avoid the high cost of a replacement.

How do I know if my remote sensor is working?

Look at the viewfinder or screen of your camera/camcorder or mobile phone. If the remote control sends a signal, you should see a light in the viewfinder or screen of your camera/camcorder or mobile phone when you press a button on the remote control.

How do I know if my remote control sensor is working?

To check if your IR Remote is sending a signal, follow the steps below:

1. Pick a device to use: Digital Camera – turn the camera on. …
2. Point the end of the remote control with the IR emitter at the camera or camcorder lens.
3. Look at the viewfinder or LCD screen.
4. Press and hold one of the buttons on the remote control.

How do I get my remote to change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

How do I fix my directv remote that won’t change channels?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

Do remote controls wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

How do I check the remote control sensor on a TV?

You can use the TV’s stock remote control to check if the TV’s IR port is working by using the remote to turn the set on or off. The TV’s IR port works if it responds to remote commands. The TV needs to be powered for the test to work. Try installing new batteries in the remote control before testing.

Do TV remote controls wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

How do you test a remote control sensor?

To check if your IR Remote is sending a signal, follow the steps below:

1. Pick a device to use: Digital Camera – turn the camera on. …
2. Point the end of the remote control with the IR emitter at the camera or camcorder lens.
3. Look at the viewfinder or LCD screen.
4. Press and hold one of the buttons on the remote control.

Can the remote sensor on a TV go bad?

A remote sensor that can no longer register the IR signal from the remote control is not necessarily defective, as there are a number of things that can cause it to not see the IR signal. You can fix a remote sensor that is not registering the IR signal using a few common household items.

How do you fix a stuck TV on one channel?

Unplug the screw on coax cord from the TV, and it should stop power cycling. Once it has stopped, while the coax cord is disconnected, run the channel scan to erase the previous channel listing. Once that scan completes, reattach the coax cord, and rerun the channel scan to find the current frequencies.

Why is my DIRECTV receiver not connecting?

Unplug your receiver

Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do you sync a remote to a Samsung TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do I pair my Samsung remote to my TV?

Here’s how you can pair up your Samsung Smart TV with your Smart remote:

1. Flip the remote. Take the remote and turn it to the other side. …
2. Locate the down arrow. …
3. Insert batteries. …
4. Aim the IR sensor. …
5. Press any button. …
6. Wait for pairing to finish. …
7. Press the Return and Extra buttons simultaneously. …
8. Wait for pairing to finish.

How do I turn my Samsung TV on without the remote?

When facing the TV, certain models have the TV Controller on back of the TV in the bottom right corner. The control stick toggles up and down as well as side to side – the menu options will appear on the TV screen when you press the center button. Long press the center button to turn the TV on or off.

How do I get my directv remote to change channels?

Change the channel using the channel up/down buttons on the receiver. If you can change channels on the receiver, change the batteries in your remote. If you can’t change channels from the receiver, turn it off and unplug it. After at least 15 seconds, plug the receiver back in and turn it on.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

The post Why is my remote not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

Likewise, How do I fix an unresponsive remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

Also, Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Moreover, How do I know if my remote sensor is working?

Look at the viewfinder or screen of your camera/camcorder or mobile phone. If the remote control sends a signal, you should see a light in the viewfinder or screen of your camera/camcorder or mobile phone when you press a button on the remote control.

Why is my remote not working?

1 Check the Batteries of the Supplied Remote

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

How do I fix my directv remote that won’t change channels?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

How do you test a remote control sensor?

To check if your IR Remote is sending a signal, follow the steps below:

1. Pick a device to use: Digital Camera – turn the camera on. …
2. Point the end of the remote control with the IR emitter at the camera or camcorder lens.
3. Look at the viewfinder or LCD screen.
4. Press and hold one of the buttons on the remote control.

Do TV remote controls wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

How do TV remote controls work?

TV remote controls work in a similar way but using a type of light called infrared (or IR for short). The remote control has an LED light in it which flashes really quickly to emit a message which is then picked up by the TV. The remote is called the transmitter, and the TV is called the receiver.

How do I reset my directv remote control?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do I get my remote to change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

How do I get my directv remote to change channels?

Change the channel using the channel up/down buttons on the receiver. If you can change channels on the receiver, change the batteries in your remote. If you can’t change channels from the receiver, turn it off and unplug it. After at least 15 seconds, plug the receiver back in and turn it on.

How do you fix a stuck TV on one channel?

Unplug the screw on coax cord from the TV, and it should stop power cycling. Once it has stopped, while the coax cord is disconnected, run the channel scan to erase the previous channel listing. Once that scan completes, reattach the coax cord, and rerun the channel scan to find the current frequencies.

Why is my DIRECTV receiver not connecting?

Unplug your receiver

Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do you sync a remote to a Samsung TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do I pair my Samsung remote to my TV?

Here’s how you can pair up your Samsung Smart TV with your Smart remote:

1. Flip the remote. Take the remote and turn it to the other side. …
2. Locate the down arrow. …
3. Insert batteries. …
4. Aim the IR sensor. …
5. Press any button. …
6. Wait for pairing to finish. …
7. Press the Return and Extra buttons simultaneously. …
8. Wait for pairing to finish.

How do I turn my Samsung TV on without the remote?

When facing the TV, certain models have the TV Controller on back of the TV in the bottom right corner. The control stick toggles up and down as well as side to side – the menu options will appear on the TV screen when you press the center button. Long press the center button to turn the TV on or off.

How do I connect my remote to my TV?

Press the HOME button on the remote. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

Why do remote controls stop working?

There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.

What can interfere with remote controls?

Ambient light, especially sunlight, can overload or desensitize the sensor on the electronic device and cause it to miss signals sent from the remote control. Devices that use infrared to communicate with the remote control should be shielded from bright, direct light.

How do I get my DIRECTV remote to work on my TV?

Program remote for an HD DVR or HD receiver

1. Press MENU on your remote.
2. Select Settings > Remote Control > Program Remote.
3. Choose the device (TV, audio, DVD) you wish to program. …
4. Follow the on-screen prompts to complete programming.

How do I get my DIRECTV remote to work?

Press the MENU button on the remote. Go to Settings & Help, then Settings, then Remote Control then Program Remote. Choose the device you want to the remote to control. Follow the on-screen instructions to finish programming your remote.

How do I program a DIRECTV remote control?

On your remote, press and hold the MUTE and SELECT buttons. Stop when the green light at the top blinks twice. Enter the appropriate manufacturer’s code. If you don’t see your TV or device listed, use the code lookup tool to find the 5-digit code.

The post How do I fix my TV remote sensor not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.