similarly, Why is my Samsung TV sound not working?

Press “Menu” on the remote, then select the “Support” menu. From there, select the “Self Diagnosis” option and then choose “Sound Test”. The TV will play a melody out of the built-in speakers. If you hear the sound, then the audio problem (whatever it may be) isn’t in the TV’s components.

on the other hand, Does Samsung Smart TV have audio out?

You will have to turn on digital audio out in the TV settings. If I remember correctly most samsungs have the option to do TV audio, digital audio out or both. … This will convert digital audio out from a Samsung to analog audio. You will have to turn on digital audio out in the TV settings.

also, Why is my Samsung TV stuck on mute? If you use a remote control to mute your TV, the problem could stem from the remote and not the TV itself. Old batteries can cause the remote to malfunction. Even newly installed batteries can be faulty and not work right. … Third party remotes may have sync issues and will need to be re-calibrated.

Why does my Samsung TV sound keep cutting out?

If your Samsung TV audio cuts out, one of the biggest culprits could be the Anynet setting. This setting, when turned on, can essentially hijack your sound. … ‘ This will disable the feature and will hopefully stop your Samsung audio from cutting out.

How do I get sound through HDMI on Samsung TV?

How to connect an HDMI cable

1. Prepare an HDMI cable.
2. Connect the cable to the TV’s HDMI IN (ARC).
3. Connect to the HDMI OUT (TV-ARC) port of the speaker that you want to connect.
4. Turn the speakers on that are connected to the TV.
5. The TV sound will be played through your external speakers.

What is Spdif audio out?

S/PDIF (Sony/Philips Digital Interface) is an audio transfer format interface. It transfers digital audio signals from one device to another without the need to first convert to an analog signal, which can degrade audio quality.

What’s better PCM or Dolby Digital?

If the only thing you have is the television speakers for your entertainment, the PCM setting is the best option because it lacks compression. You’ll hear muted tones and less audio clarity when using the Dolby Digital setting with your stock setup.

Why does my TV suddenly have no sound?

Temporarily unplug all the TV connection cables and reboot the TV set. Sometimes, temporarily unplugging the connected cables might help resolve your TV no sound issue. This temporary reset works to clear the short-term memory of the television, and also helps to resolve some other issues.

Why is my HDMI sound not working?

Your HDMI no sound problem can be caused by corrupt or missing audio driver issues. To fix the problem, you can try to update the sound driver. There are two ways you can get the right drivers for your sound card: manually or automatically.

How do I get my TV off mute?

Open the Settings menu either by using the button on your remote or if your remote doesn’t have a Settings button, press the Home/Smart button, then click the Settings icon. Navigate to the Audio/Sound menu. Choose Sound Out, then select TV Speakers.

Why does my sound keep cutting out TV?

Intermittent audio can be electronics in the Review, bad cable or contacts, or the TV itself. Start by reseating the HDMI cable at both ends; check to see if the contacts are dirty. Use another HDMI source (borrow if you don’t have one) to see if it’s the Review. Finally, see if another HDMI TV eliminates the problem.

Why does my sound system keep cutting out?

The most often reason for speakers to cut out at a high volume is either issue with an amplifier or a problem with the crossover settings. Also, speakers that are not designed to handle a high volume can cut out often when overpowered.

Why is my TV cutting in and out?

If your TV picture is breaking up, cutting in and out, or pixelating (looks like everything is a bunch of squares), then you probably are experiencing a weak signal. Check all of the connections from the wall to your cable box and from the cable box to your TV to ensure that all connections are tight.

How do I connect my Samsung TV to speakers?

On your TV, navigate to Home, select Settings, select Sound, select Expert Settings, select Wireless Speaker Manager, and then select Bluetooth Audio Devices. Select your soundbar from the list. When the TV is connected, [TV Name] → BT appears on the soundbar’s front display.

Why can’t I hear sound on my TV through HDMI?

Make sure the volume is turned up. You also may need to go into the set-top box menu and select HDMI in the Audio Settings or Audio Coding section to pass the audio to the TV. … You may need an update to your set-top box firmware, or a newer set-top box from your service provider.

Which is better AUX or optical?

In terms of audio quality, aux is more open to line loss and interference. … Higher quality aux cables can also help as they’re better shielded. Optical isn’t foolproof either. Though not prone to interference in the way that aux is, digital can ‘lose’ data, especially over longer cable runs.

Is SPDIF better than HDMI?

The Biggest Difference: HDMI is better because it’s capable of passing higher-resolution audio that’s uncompressed, which includes extra formats that won’t translate as well through optical cable and S/PDIF like Blu-Ray’s DTS HD Master Audio and Dolby TrueHD. Optical can’t transmit those formats.

Is digital coaxial the same as SPDIF?

Coaxial and SPDIF inputs are both digital connections. Coaxial cables also have an RCA connector present to allow you to interface with the RCA ports in speakers and sound-system interfaces. What Is SPDIF? … It doesn’t have a specific SPDIF cable.

Is PCM 5.1 surround sound?

PCM is the conventional method for converting analog audio into digital audio. The PCM audio recorded on DVD is a two-channel digital, stereo audio track. … Dolby Digital® technology uses a 5.1 or six channel format.

Is PCM better than DTS?

PCM is best suited to those who do not have an AV receiver and output the sound via the TV boxes. This also calls for PCM: If you want to output HD sound formats such as Dolby True HD or DTS HD, but the AV receiver does not support them.

What is better Dolby or DTS?

The main difference between DTS and Dolby Digital is seen in the bit rates and compression levels. Dolby digital compresses 5.1ch digital audio data down to a raw bit rate of 640 kilobits per second (kbps). … What this means is that DTS has the potential to produce better sound quality than Dolby Digital.

Why has my sound stopped working?

Check your volume settings

Once you open the window, click Open Sound Settings. In the Sound Settings window, click Sound Control Panel. Within the Sound Control Panel, open the Playback tab. … If the sound is not working, right click on the default audio device again, this time selecting Properties.

How do I get sound on my TV through HDMI?

Right-click the volume control icon on the bottom taskbar and click on “Playback Devices” to open the pop-up window for sound options. In the “Playback” tab, select “Digital Output Device” or “HDMI” as the default device, click “Set Default” and click “OK” to save the changes.

Don’t forget to share the post !

The post How do I restore the sound on my Samsung TV? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, Why is my TV speaker crackling?

A crackling or popping sound from your TV is normal and is not a malfunction. These sounds occur when parts expand or contract slightly due to temperature changes in the room or your TV. … The sound location may change or become less noticeable due to environmental changes, such as temperature or humidity.

on the other hand, Why are TV speakers so bad?

Manufacturers are constantly making their TVs thinner and the bezels smaller. This has forced the speakers into the back or the bottom, making them very tiny in the process. The problem is, speakers need to be bigger to produce decent sound. And it doesn’t help that they’re often facing down or away from you.

also, How do I make my TV sound clearer? Often, the best way to improve your TV’s sound is to bypass its internal speakers completely and opt for an external set. There are two ways to connect external speakers depending on your TV’s capability: using a cable (3.5mm audio or digital) or, if you have support for it, using the HDMI Audio Return Channel (ARC).

How do you fix a crackling speaker?

Ensure the speaker wires are properly connected to both the speakers and stereo receiver. Turn off any nearby electronic devices that may be interfering with the speaker sound. Move the speaker wires away from any electrical cords. If the issue is still unresolved, reset the receiver to the factory default settings.

Why does my Samsung TV crackle?

If you hear a cracking or popping noise, it could be due to temperature changes. … A buzzing, crackling, or humming noise could be caused by electrical feedback. Arranging the cables and making sure the TV has good ventilation will keep it quiet.

Why does the sound keep cutting out on my Samsung TV?

If your Samsung TV audio cuts out, one of the biggest culprits could be the Anynet setting. This setting, when turned on, can essentially hijack your sound. To turn off Anynet, click ‘Menu’ from your remote > select ‘General’ > select ‘External Device Manager’ > click ‘Anynet+ (HDMI-CEC) > ‘Enter’ > ‘Off.

What to do with old large speakers?

7 creative ways to reuse or recycle old speakers

1. Turn the old desktop speaker into a large charging device.
2. Create a radio on the Internet.
3. Turn automobile speakers into a Boombox.
4. Add Chromecast. …
5. Reuse the diaphragm part to make earrings hanging.
6. Make bookshelves or wooden decorations.

Why is my Samsung TV sound distorted?

Distorted sound issue can be occurred due to loose connection, cable or problem with source. 1 Check if Distorted sound issue is related to any audio/video files or any particular TV channel.

Does sound bar replace TV speakers?

Soundbars are designed to replace your TV speakers; they are not meant to work in parallel with your television’s built-in speakers. The primary reason for this is the echo. When you run both your TV speakers and your soundbar at the same time, the same audio signal is relayed to both.

What is the best sound mode for TV?

Samsung – Recommended TV Audio Settings

What volume should my TV be on?

For most TV programmes audio hovers around PPM 5 1/2 and PPM6. Some dramas use a wider signal range, dropping below PPM3 and peaking at PPM6. With loudness meters we can make use of the wide loudness range but we make sure all the programmes average at -23LUFS.

Why is my phone speaker making a crackling sound?

Speaker crackling is almost always caused by a connection problem. Someplace between your amplifier and your speaker driver, there’s a bad wire which is causing the driver to move abruptly, causing interference.

How do I get my sound to stop crackling?

Windows 10 Audio Crackling: 10 Ways To Fix The Problem

1. Plug Your Device Back In.
2. Test Your Audio Equipment On Another Device.
3. Test Another Headphone Port.
4. Update Your Sound Drivers.
5. Change The Audio Format.
6. Turn Off Spatial Sound.
7. Disable Exclusive Mode.
8. Change Power Settings.

Can you fix a blown speaker?

Usually, it’s impractical to repair a blown speaker, as repairs can often cost more than replacements, but whether you had a car or home speaker fail on you, there are many viable replacements.

How do I fix the buzzing sound on my Samsung TV?

How to Fix a Buzzing LCD TV

1. Mute your LCD TV and listen closely. …
2. Adjust the volume settings on external devices connected to the TV, if available. …
3. Turn the TV off, then unplug the device from the power outlet. …
4. Move electronic devices that may cause interference away from your LCD TV.

How do I fix the muffled sound on my TV?

If you find your TV sounds a bit muffled and speech is hard to hear, then you can try dialling down the bass settings and upping the treble. You can tweak the sound the way that you want it using the equalizer, but you’re still limited by the overall quality of your TV’s speakers.

How do I keep the volume constant on my Samsung TV?

Change Auto Volume Settings:

1. 1 Press the Home button on your Samsung remote control to bring up the Smart Hub and then select Settings.
2. 2 Scroll down to the. Sound tab and then select Expert Settings.
3. 3 Scroll down to highlight Auto Volume and then press enter on your remote control to turn this function on or off.

How do I get the sound back on my Samsung TV?

Press “Menu” on the remote, then select the “Support” menu. From there, select the “Self Diagnosis” option and then choose “Sound Test”. The TV will play a melody out of the built-in speakers. If you hear the sound, then the audio problem (whatever it may be) isn’t in the TV’s components.

Why does my sound system keep cutting out?

The most often reason for speakers to cut out at a high volume is either issue with an amplifier or a problem with the crossover settings. Also, speakers that are not designed to handle a high volume can cut out often when overpowered.

Why is my TV cutting in and out?

If your TV picture is breaking up, cutting in and out, or pixelating (looks like everything is a bunch of squares), then you probably are experiencing a weak signal. Check all of the connections from the wall to your cable box and from the cable box to your TV to ensure that all connections are tight.

What do you do with old speakers and receivers?

Here are my top picks for the best ways to dispose of your old or broken home theater equipment.

1. Donate it to a local community organization. …
2. Give it to Goodwill or the Salvation Army. …
3. Recycle broken equipment. …
4. Check out Greener Gadgets. …
5. Use it as a backup system. …
6. Take it to a local electronics store. …
7. Sell it on eBay.

Are speakers worth scrapping?

Taking your speaker apart and finding the metals inside could help you get more cash. … Unless you have a large amount of them, if may not be worth your time to take apart Speakers for scrap. Separating them from your speakers will land you more cash and get your better Speakers Scrap Prices.

How do I get rid of old speakers?

Many states have banned stereos and other eWaste from landfills, so it might be mandatory to recycle them. Even if it isn’t mandatory in your state, the best way to get rid of old stereo speakers and surround sound speakers is to recycle them.

Don’t forget to share the post !

The post Why is my TV speaker muffled? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, Can blown speakers be fixed?

Usually, it’s impractical to repair a blown speaker, as repairs can often cost more than replacements, but whether you had a car or home speaker fail on you, there are many viable replacements.

on the other hand, What happens when a speaker blows?

If any driver gets blown in a multi-driver speaker, the frequency response of that speaker will be severely altered. If the tweeter is blown, the high-end will be either distorted or non-existent. If the woofer is blown, the mid-range will be either distorted or non-existent.

also, Why is my speaker making a crackling sound? Speaker popping and crackling is caused by interrupted electrical current (audio signals) or, in other words, a loose or dirty connection. To fix crackling and popping, troubleshoot the connective wires to find the problem area and secure the connection and/or replace the cable.

Can you damage speakers by playing them too loud?

Playing music/audio too loud may cause damage to speakers due to excess heat in the drivers or even mechanical failure of the driver suspension. Speakers have power ratings that, when exceeded (by increasing the amplifier/volume control), will burn/melt the driver coil and damage the speaker.

Why do my speakers sound bad at low volume?

Why do some speakers sound fine at low volumes but distort at high volumes? … You’re much more likely to hear distortion or cause damage if your amplifier is under powering the speakers. Higher volume means asking the amplifier for more power. If it is unable to provide enough, your speakers will distort.

Does playing speakers loud hurt them?

Playing music/audio too loud may cause damage to speakers due to excess heat in the drivers or even mechanical failure of the driver suspension. Speakers have power ratings that, when exceeded (by increasing the amplifier/volume control), will burn/melt the driver coil and damage the speaker.

How do you know if your phone speaker is blown?

To run a diagnostic test on a Samsung phone, follow these steps:

1. Dial *#7353# on your phone to enter the diagnostic tool.
2. To check your phone’s external speaker, select Speaker. You will hear loud music if your phone’s speakers are working fine.
3. To check your phone’s internal speaker, select Melody.

How do you fix a crackling speaker?

Follow the procedure below to troubleshoot this issue.

1. Turn off the stereo receiver.
2. Ensure the speaker wires are properly connected to both the speakers and stereo receiver.
3. Turn off any nearby electronic devices that may be interfering with the speaker sound.
4. Move the speaker wires away from any electrical cords.

How do I fix my crackling sound?

Windows 10 Audio Crackling: 10 Ways To Fix The Problem

1. Plug Your Device Back In.
2. Test Your Audio Equipment On Another Device.
3. Test Another Headphone Port.
4. Update Your Sound Drivers.
5. Change The Audio Format.
6. Turn Off Spatial Sound.
7. Disable Exclusive Mode.
8. Change Power Settings.

How do you fix crackling?

Change Your Audio Format

Click the “Advanced” tab and use the Default Format box to select your sound quality level. Try setting your audio quality to “16 bit, 44100 Hz (CD Quality)”. Click “OK” afterwards and see if the crackling or other audio problems continue. This change can fix some audio problems.

What causes a blown speaker?

Most failures occur from ELECTRICAL failure caused by applying too much power to the speaker’s voice coil. Constant over-powering results in “burned” voice coils. … Usually, too low of frequency applied to a small suspension type driver (tweeter/midrange) can physically cause the speaker surround to delaminate.

How do you tell if a speaker is going bad?

Physically inspect the speaker.

A blown speaker can have damage that can be heard with some mechanical movement. If you gently tap on the cone of the speaker it should have a firm drum like sound. If you hear a rattling sound (like a loose snare drum), this is an indicator of a bad speaker.

Can you ruin speakers?

The answer is yes, you can play music too loud and damage your speakers. There are a couple ways this mishap on your part can occur too which you should familiarize yourself with. When you over-power low-frequency speakers or subwoofers, it’s either electrical or mechanical in nature.

How do I stop my speakers from blowing?

Keep the volume on your receiver at least 5-6dB below its max setting. The volume adjustment on most receivers goes from -80dB (mute) to about +16dB (max). By staying below -6dB below that max setting you can typically avoid over-driving the receiver, which could potentially damage your speakers and receiver.

Why do my speakers crackle when I turn up the volume?

Speaker crackling is almost always caused by a connection problem. … The first thing to do is to check the wire connections between the amplifier and the terminals on the speaker itself. If the wire has a tendency to get moved around, perhaps by a cat or dog, it’s a possibility something has come loose.

Are heavy speakers better?

So are large, heavy speakers better than small ones? The short answer is yes. Small speakers may have the advantage in size and cost (though not if you’re going for a high-end new model), but bigger speakers outdo the smaller ones in performance. And in general, performance is what we all look for most in a speaker.

Do bigger speakers sound better at low volume?

If you have a large room, love bass, and like to listen loud, you need big speakers. It’s not just a matter of louder volume or bass: big speakers just sound better than little ones. When it comes to speakers, size does matter. Big speakers clobber little ones in two ways: they can play louder and make more bass.

How loud can I turn up my speakers?

Can I turn up the stereo louder than –5 Db without fear of damaging the speakers? ?. The short answer is yes, you can listen to your system, even at FULL volume without worrying about damage if you’re playing a signal that is at a low level.

Can’t hear on phone unless it’s on speaker?

Go to Settings → My Device → Sound → Samsung Applications → Press Call → Turn Off Noise Reduction. Your earpiece speaker may be dead. When you put your phone in speaker mode it uses different speaker(s).

How do you fix a waterlogged speaker?

The most important being powering off your device, drying it down with a soft absorbent cloth and avoiding pressing unnecessary buttons and moving it around too much – both can cause water to delve deeper into your phone. You can leave your phone to dry out for a few days, in a bag of rice to help absorb the moisture.

Why does my phone speaker sound fuzzy?

Your cell phone’s speaker vents collect all kinds of debris over time (makeup, dead skin cells, pocket lint, etc.) and that can cause the sound to become muffled. … Using compressed air, chemicals or water to try to clean your speaker at home can damage not only the speaker but your entire phone!

Why is the sound on my TV garbled?

Distorted sound issue can be occurred due to loose connection, cable or problem with source. 1 Check if Distorted sound issue is related to any audio/video files or any particular TV channel.

Don’t forget to share the post !

The post What do blown out speakers sound like? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, Why does my Samsung TV sound keep cutting out?

If your Samsung TV audio cuts out, one of the biggest culprits could be the Anynet setting. This setting, when turned on, can essentially hijack your sound. … ‘ This will disable the feature and will hopefully stop your Samsung audio from cutting out.

on the other hand, How do I get sound through HDMI on Samsung TV?

How to connect an HDMI cable

1. Prepare an HDMI cable.
2. Connect the cable to the TV’s HDMI IN (ARC).
3. Connect to the HDMI OUT (TV-ARC) port of the speaker that you want to connect.
4. Turn the speakers on that are connected to the TV.
5. The TV sound will be played through your external speakers.

also, What is Spdif audio out? S/PDIF (Sony/Philips Digital Interface) is an audio transfer format interface. It transfers digital audio signals from one device to another without the need to first convert to an analog signal, which can degrade audio quality.

What’s better PCM or Dolby Digital?

If the only thing you have is the television speakers for your entertainment, the PCM setting is the best option because it lacks compression. You’ll hear muted tones and less audio clarity when using the Dolby Digital setting with your stock setup.

Why does my sound keep cutting out TV?

Intermittent audio can be electronics in the Review, bad cable or contacts, or the TV itself. Start by reseating the HDMI cable at both ends; check to see if the contacts are dirty. Use another HDMI source (borrow if you don’t have one) to see if it’s the Review. Finally, see if another HDMI TV eliminates the problem.

Why does my sound system keep cutting out?

The most often reason for speakers to cut out at a high volume is either issue with an amplifier or a problem with the crossover settings. Also, speakers that are not designed to handle a high volume can cut out often when overpowered.

Why is my TV cutting in and out?

If your TV picture is breaking up, cutting in and out, or pixelating (looks like everything is a bunch of squares), then you probably are experiencing a weak signal. Check all of the connections from the wall to your cable box and from the cable box to your TV to ensure that all connections are tight.

How do I get sound back on my Samsung TV?

Press “Menu” on the remote, then select the “Support” menu. From there, select the “Self Diagnosis” option and then choose “Sound Test”. The TV will play a melody out of the built-in speakers. If you hear the sound, then the audio problem (whatever it may be) isn’t in the TV’s components.

Why can’t I hear sound on my TV through HDMI?

Make sure the volume is turned up. You also may need to go into the set-top box menu and select HDMI in the Audio Settings or Audio Coding section to pass the audio to the TV. … You may need an update to your set-top box firmware, or a newer set-top box from your service provider.

How do you fix a stuck sound on a Samsung TV?

If that solution didn’t work, you can either reset the tv as suggested in the previous section “Samsung Volume Display Stuck on Screen” or you can reset the volume internally. To do this, select Settings > select Sound > select Expert Settings > select Reset Sound > then select Reset to reset all the sound settings.

Which is better AUX or optical?

In terms of audio quality, aux is more open to line loss and interference. … Higher quality aux cables can also help as they’re better shielded. Optical isn’t foolproof either. Though not prone to interference in the way that aux is, digital can ‘lose’ data, especially over longer cable runs.

Is SPDIF better than HDMI?

The Biggest Difference: HDMI is better because it’s capable of passing higher-resolution audio that’s uncompressed, which includes extra formats that won’t translate as well through optical cable and S/PDIF like Blu-Ray’s DTS HD Master Audio and Dolby TrueHD. Optical can’t transmit those formats.

Is digital coaxial the same as SPDIF?

Coaxial and SPDIF inputs are both digital connections. Coaxial cables also have an RCA connector present to allow you to interface with the RCA ports in speakers and sound-system interfaces. What Is SPDIF? … It doesn’t have a specific SPDIF cable.

Is PCM 5.1 surround sound?

PCM is the conventional method for converting analog audio into digital audio. The PCM audio recorded on DVD is a two-channel digital, stereo audio track. … Dolby Digital® technology uses a 5.1 or six channel format.

Is PCM better than DTS?

PCM is best suited to those who do not have an AV receiver and output the sound via the TV boxes. This also calls for PCM: If you want to output HD sound formats such as Dolby True HD or DTS HD, but the AV receiver does not support them.

What is better Dolby or DTS?

The main difference between DTS and Dolby Digital is seen in the bit rates and compression levels. Dolby digital compresses 5.1ch digital audio data down to a raw bit rate of 640 kilobits per second (kbps). … What this means is that DTS has the potential to produce better sound quality than Dolby Digital.

How do I reset the sound on my Samsung TV?

How to reset sound settings on Samsung TV

1. 1 Press the Home button on your remote control.
2. 2 Using the directional pad on your remote, navigate to and select Settings.
3. 3 Navigate to and select Sound > Expert Settings.
4. 4 Navigate to and select Reset Sound.

Why does my sound keep cutting out on Zoom?

Make sure your computer speakers are on/not muted. … If your speakers appear to be on and the volume is up, but you still cannot hear the audio, check Zoom’s audio settings and select a new speaker. Click the upward arrow to the right of the Mute button at the bottom of the Zoom window.

Why do my speakers keep cutting in and out?

Poorly Connected Wire

If the wire is not making a clean and unobstructed connection with both the speaker and the audio receiver then that sound can cut in and out. The wires must be making full contact with the terminals and fitting snugly inside their respective connection points.

Why does my wireless speaker keep cutting out?

A Bluetooth speaker may cut out for one of many reasons, including: Low battery. Interference from other electronic devices or radio waves. Your device is not compatible or no longer supported.

How do you know when your flat screen is going out?

6 Signs That Your TV Needs to be Repaired

• Dead Pixels. Few things are as off-putting as a dead pixel in the middle of your screen. …
• Colour Distortion. If the colours on your screen appear distorted, then your TV might be malfunctioning. …
• Bars and Lines. …
• Image Retention. …
• Fuzzy Screen. …
• Fading Screens.

Why did my Samsung TV just go black?

A black screen could just be a sign that the TV is turned off, although if it is producing sound then you know that’s not the case. When your TV has a black screen even when it’s on, it’s quite possible it could actually be your external device and not your TV.

What is HDMI handshake?

One of the most notorious errors that can happen in this pathway is with the HDMI “Handshake.” The HDMI Handshake is the process of both the source (streaming device, UHD blu-ray, gaming console) and the sink (television, projector, monitor) recognizing each other and determining that they are both authorized to …

Don’t forget to share the post !

The post Does Samsung Smart TV have audio out? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.