similarly, Can’t pair Skullcandy method Wireless?

Android. Go to Settings and turn on Bluetooth. In Bluetooth click “Pair new device”. When you see your Skullcandy device come up in the list, tap it and it should be paired with your phone.

on the other hand, Why are my Skullcandy headphones Flashing blue and red?

The most common reason why your Bluetooth headset is flashing red and blue is it is unpaired. The headphones are looking for a connection. It’s possible you may have accidentally held down the pairing button. This puts the headphones in pairing mode, which makes the status lights blink red and blue.

also, How do you pair left and right earbuds? Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.

How do you reset a wireless Skullcandy?

The general method to reset for Skullcandy headphones

1. Turn off your headphones.
2. Hold Volume + & center or power button for up to 5 seconds to reset the paired list.
3. Remove the devices turn it on again.
4. It is ready to pair, so choose the desired device and enjoy it.

How do I make Skullcandy Indy discoverable?

For Android devices: Click “+ Pair New Device” and select Indy Evo to pair your earbuds to your device. IMPORTANT – Select all “Pair” and “Ok” prompts that will pop up on your screen.

Why are my Bluetooth headphones not connecting?

For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.

What does the red light on Skullcandy earbuds mean?

The red LED will flash if your headset is about to die, will be solid when you plug it in to charge. If it is fully charged, it will be solid blue. When you turn it on and go to pair it with your device, it will be a lavender or purple color then alternate flashing between blue and red.

How do you reset Bluetooth headphones?

EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.

Why wont my earbuds connect?

True Wireless Earbuds can sometimes un-sync from one another requiring a manual reset to enable them to auto sync to one another. … It’s simple to reset your earbuds to enable them to auto sync to each other again.

How do you pair both earbuds?

How to Connect Bluetooth Headphones to Android Phone

1. First Open Settings. …
2. Next, tap Connections.
3. Then tap Bluetooth. …
4. Then tap Scan at the top-right corner of your screen.
5. Next, press and hold the power button on your headphones. …
6. Finally, find your headphones and tap them.

Why is my Bluetooth not connecting?

For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.

How do I fix the Bluetooth pairing problem?

What you can do about pairing failures

1. Determine which pairing process your device employs. …
2. Make sure Bluetooth is turned on. …
3. Turn on discoverable mode. …
4. Power the devices off and back on. …
5. Delete a device from a phone and rediscover it. …
6. Make sure the devices you want to pair are designed to connect with each other.

How do I put Skullcandy Indy fuel in pairing mode?

PAIRING ISSUES?

1. Place the buds back in the case until both LED’s show red, and then pull them back out.
2. Both buds will automatically power ON and the LED’s will simultaneously flash BLUE while they sync to each other.

How do I put my headphones in pairing mode?

Activate Pairing mode on the Bluetooth headphones. Press and hold the power button or the ID SET button. When the indicator starts to blink quickly, release the button. The Bluetooth headphones enter Pairing mode.

Why is my Bluetooth not detected?

Make sure Airplane mode is turned off. Turn Bluetooth on and off: Select Start , then select Settings > Devices > Bluetooth & other devices . Turn off Bluetooth, wait a few seconds, then turn it back on. … In Bluetooth, select the device you’re having problems connecting to, and then select Remove device > Yes.

How do you find lost Skullcandy earbuds?

Your headphones or earbuds utilize Tile’s Bluetooth tracking technology to find them if they’re hiding nearby. Or, you can see the location of where your headphones/earbuds were last connected in the Tile app on your phone.

How do I reset my headphone settings?

Turn off the headset, then press and hold the POWER and / buttons simultaneously for more than 7 seconds. The indicator (blue) flashes 4 times, and the headset is reset to the factory settings. All pairing information is deleted.

How do I reset my Bluetooth?

Clear Your Android Device’s Bluetooth Cache

1. Go to the Settings on your Android device.
2. Select Apps.
3. Click ⋮ to display your system apps.
4. Select Bluetooth from the list of apps, then select Storage.
5. Tap Clear Cache and exit your Settings.
6. Restart your device and try pairing it to your Reader again.

Why wont both of my wireless earphones connect?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

How do you reset Bluetooth earbuds?

EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.

Why is my other earphone not working?

Diagnosis: Faulty wiring within defective earbud

Sometimes, a loose or broken wire can cause your earbuds to play only in one ear. Once you’ve determined that the issue isn’t caused by a broken or shorted wire along the cord, follow the steps below to open and fix the earbud.

Why can I only hear out of one Bluetooth earbud?

Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.

Don’t forget to share the post !

The post How do you put Skullcandy push in pairing mode? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, Why are my Bluetooth headphones not connecting?

For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.

on the other hand, How do you put Skullcandy push in pairing mode?

Tap the + on the top left corner of your screen. On the Add a Device page, choose Skullcandy and select the Tile enabled headphones. Press the button on your Tile device and listen for the tune. Hold the Tile close to your device until they connect, it should take about ten seconds.

also, Why are my Skullcandy headphones flashing red? If you’ve already paired your headphones, they’ll automatically connect and the bottom LED will blink blue. If the bottom LED blinks red, that means they’re disconnected.

How do I fix the Bluetooth pairing problem?

What you can do about pairing failures

1. Determine which pairing process your device employs. …
2. Make sure Bluetooth is turned on. …
3. Turn on discoverable mode. …
4. Power the devices off and back on. …
5. Delete a device from a phone and rediscover it. …
6. Make sure the devices you want to pair are designed to connect with each other.

How do I put my headphones in pairing mode?

Activate Pairing mode on the Bluetooth headphones. Press and hold the power button or the ID SET button. When the indicator starts to blink quickly, release the button. The Bluetooth headphones enter Pairing mode.

How do you reset Bluetooth headphones?

EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.

How do you pair left and right earbuds?

Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.

Why wont my Indy headphones connect?

Remove Indy Wireless from your device’s paired list. Turn off Bluetooth mode on your device (mobile or computer) Power on only your right Indy Wireless earbud by removing it from the case. … Next, remove both earbuds from the case to have them automatically power on and begin pairing to one another.

Why is my Bluetooth not detected?

Make sure Airplane mode is turned off. Turn Bluetooth on and off: Select Start , then select Settings > Devices > Bluetooth & other devices . Turn off Bluetooth, wait a few seconds, then turn it back on. … In Bluetooth, select the device you’re having problems connecting to, and then select Remove device > Yes.

How do I force a Bluetooth device to pair?

Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.

Why isn’t my Bluetooth working on my Android?

If the Bluetooth is not connecting android properly, you might have to clear the stored app data and cache for the Bluetooth app. … Tap on ‘Storage & cache’. You can now clear both the storage and cache data from the menu. After that, reconnect with your Bluetooth device to see if it works.

How do I put wf1000xm3 in pairing mode?

Wireless Noise Canceling Stereo HeadsetWF-1000XM3

When you pair a second or subsequent device, put the headset in both ears, then hold your fingers to the touch sensors on both the left and right units for about 7 seconds to enter pairing mode.

How do I pair my Bluetooth headset with my phone?

On an Android device, pull down the shade from the top of the phone and long-press the Bluetooth icon. It’ll bring you right to the Bluetooth menu where you can turn it on and then search for devices. Tap the name of the headphones you’re trying to pair.

How do I reset my headphone settings?

Turn off the headset, then press and hold the POWER and / buttons simultaneously for more than 7 seconds. The indicator (blue) flashes 4 times, and the headset is reset to the factory settings. All pairing information is deleted.

How do I reset my Bluetooth?

Clear Your Android Device’s Bluetooth Cache

1. Go to the Settings on your Android device.
2. Select Apps.
3. Click ⋮ to display your system apps.
4. Select Bluetooth from the list of apps, then select Storage.
5. Tap Clear Cache and exit your Settings.
6. Restart your device and try pairing it to your Reader again.

Why wont my earbuds connect?

True Wireless Earbuds can sometimes un-sync from one another requiring a manual reset to enable them to auto sync to one another. … It’s simple to reset your earbuds to enable them to auto sync to each other again.

How do you pair both earbuds?

How to Connect Bluetooth Headphones to Android Phone

1. First Open Settings. …
2. Next, tap Connections.
3. Then tap Bluetooth. …
4. Then tap Scan at the top-right corner of your screen.
5. Next, press and hold the power button on your headphones. …
6. Finally, find your headphones and tap them.

Why won’t my earbuds connect?

On Android, tap the Settings cog next to a paired device and choose Unpair (or Forget, as it’s labeled on some phones). Recharge the battery. … Try plugging them in and charging them fully before pairing, even if they say they have some battery left. Make sure both devices are compatible.

How do you reset Skullcandy Indy fuel?

Once both buds have been powered OFF, reset them: Touch and hold each bud for 10 seconds to completely reset them (this will power cycle them on and off again).

How do I reconnect my Indy headphones?

At this time, turn on your device’s Bluetooth and look for Indy Evo in your list of “Available Bluetooth” devices. Please make sure it only appears once, and select it. For Android devices: Click “+ Pair New Device” and select Indy Evo to pair your earbuds to your device.

Why does only one Bluetooth earbud connect?

Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings.

Can’t connect to Bluetooth?

Step 1: Check Bluetooth basics

1. Turn Bluetooth off and then on again. Learn how to turn Bluetooth on and off.
2. Confirm that your devices are paired and connected. Learn how to pair and connect via Bluetooth.
3. Restart your devices. Learn how to restart your Pixel phone or Nexus device.

How do I fix Bluetooth device not found?

1. Try reinstalling your Bluetooth drivers. …
2. Add the Bluetooth device again. …
3. Run the Hardware and Devices Troubleshooter. …
4. Restart Bluetooth service. …
5. Make sure that you’re properly pairing your devices. …
6. Disconnect all Bluetooth devices. …
7. Connect the Bluetooth adapter to a different USB port. …
8. Disable Wi-Fi.

How do I turn on discoverable mode?

Navigate to the “Settings” menu on your cell phone and locate the “Bluetooth” option. Select the option to place the device in discovery mode. Select the option “Scan for Devices.” This will enable the phone to locate compatible Bluetooth devices near its location.

Don’t forget to share the post !

The post How do I make my Skullcandy Bluetooth headphones discoverable? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, How do I reset my Skullcandy push?

Touch and hold the Power/MFB button on both buds for 10 seconds to completely reset them (this will power cycle them on and off again).

on the other hand, Why wont my earbuds connect?

True Wireless Earbuds can sometimes un-sync from one another requiring a manual reset to enable them to auto sync to one another. … It’s simple to reset your earbuds to enable them to auto sync to each other again.

also, How do you pair both earbuds? How to Connect Bluetooth Headphones to Android Phone

1. First Open Settings. …
2. Next, tap Connections.
3. Then tap Bluetooth. …
4. Then tap Scan at the top-right corner of your screen.
5. Next, press and hold the power button on your headphones. …
6. Finally, find your headphones and tap them.

Why are my Bluetooth headphones not connecting?

For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.

Why are my Skullcandy headphones Flashing blue and red?

The most common reason why your Bluetooth headset is flashing red and blue is it is unpaired. The headphones are looking for a connection. It’s possible you may have accidentally held down the pairing button. This puts the headphones in pairing mode, which makes the status lights blink red and blue.

How do you make a Skullcandy push discoverable?

Android. Go to Settings and turn on Bluetooth. In Bluetooth click “Pair new device”. When you see your Skullcandy device come up in the list, tap it and it should be paired with your phone.

How do I fix the Bluetooth pairing problem?

What you can do about pairing failures

1. Determine which pairing process your device employs. …
2. Make sure Bluetooth is turned on. …
3. Turn on discoverable mode. …
4. Power the devices off and back on. …
5. Delete a device from a phone and rediscover it. …
6. Make sure the devices you want to pair are designed to connect with each other.

Why wont both of my wireless earphones connect?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

How do you reset Bluetooth earbuds?

EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.

Why is my other earphone not working?

Diagnosis: Faulty wiring within defective earbud

Sometimes, a loose or broken wire can cause your earbuds to play only in one ear. Once you’ve determined that the issue isn’t caused by a broken or shorted wire along the cord, follow the steps below to open and fix the earbud.

Why can I only hear out of one Bluetooth earbud?

Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.

How do you reset Bluetooth headphones?

EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.

Why is my Bluetooth not detected?

Make sure Airplane mode is turned off. Turn Bluetooth on and off: Select Start , then select Settings > Devices > Bluetooth & other devices . Turn off Bluetooth, wait a few seconds, then turn it back on. … In Bluetooth, select the device you’re having problems connecting to, and then select Remove device > Yes.

What does the red light on Skullcandy earbuds mean?

The red LED will flash if your headset is about to die, will be solid when you plug it in to charge. If it is fully charged, it will be solid blue. When you turn it on and go to pair it with your device, it will be a lavender or purple color then alternate flashing between blue and red.

How do I know if my Skullcandy headphones are charged?

The earbud LEDs will be solid red while charging. The LEDs will turn off when fully charged.

Why are my jib wireless headphones not connecting?

Restart your device. Make sure that your device and earbuds/headphones are in close proximity with nothing between them. … Forget and re-pair your earbuds/headphones. On your device select: SETTINGS → BLUETOOTH → ON.

How do you put wireless headphones in pairing mode?

Make sure that the device is on. Press and hold the power button on your headphones for about 7 seconds. This will put it in pairing mode which will allow it to pair up with your device. Release the button when you see the light indicator blinking quickly (usually flashing red/green and blue).

How do I force a Bluetooth device to pair?

Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.

How do I make my JLab headphones discoverable?

Go to Settings and turn on Bluetooth. In Bluetooth click “Pair new device”. When you see your JLab headphones or headset come up in the list, tap it and it should be paired with your phone.

How do I reset my headphones?

Select Device details, then select Reset now > Reset now to confirm and reset them. On an iOS device or Android device: Open the Surface Audio app, then tap Settings next to Surface Headphones. In Device Settings, tap Factory reset > Yes to confirm and reset them.

Why are my headphones not working when I plug them in Windows 10?

Make Sure Headphones Are Set as Enabled and Set as Default Device. … In the Sound Settings window, click “Manage sound devices” and see whether your “headset” or “headphones” are under the “Disabled” list. If they are, click them and click “Enable.”

How do I fix my headphone jack?

1. Step 1 How to Repair a Headphone Jack. …
2. Use wire strippers to cut off the broken headphone jack. …
3. Disassemble the new headphone jack. …
4. Put the exposed cord through the metal and plastic sleeves of the jack, as shown. …
5. Separate the wires by color. …
6. Place the jack in the helping hands stand.

Don’t forget to share the post !

The post How do you pair left and right earbuds? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, Why is my Bluetooth headphones not connecting?

For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.

on the other hand, Why wont my earbuds connect?

True Wireless Earbuds can sometimes un-sync from one another requiring a manual reset to enable them to auto sync to one another. … It’s simple to reset your earbuds to enable them to auto sync to each other again.

also, How do you pair both earbuds? How to Connect Bluetooth Headphones to Android Phone

1. First Open Settings. …
2. Next, tap Connections.
3. Then tap Bluetooth. …
4. Then tap Scan at the top-right corner of your screen.
5. Next, press and hold the power button on your headphones. …
6. Finally, find your headphones and tap them.

Why won’t my earbuds connect?

On Android, tap the Settings cog next to a paired device and choose Unpair (or Forget, as it’s labeled on some phones). Recharge the battery. … Try plugging them in and charging them fully before pairing, even if they say they have some battery left. Make sure both devices are compatible.

How do I fix the Bluetooth pairing problem?

What you can do about pairing failures

1. Determine which pairing process your device employs. …
2. Make sure Bluetooth is turned on. …
3. Turn on discoverable mode. …
4. Power the devices off and back on. …
5. Delete a device from a phone and rediscover it. …
6. Make sure the devices you want to pair are designed to connect with each other.

How do I put my headphones in pairing mode?

Activate Pairing mode on the Bluetooth headphones. Press and hold the power button or the ID SET button. When the indicator starts to blink quickly, release the button. The Bluetooth headphones enter Pairing mode.

How do you reset Bluetooth headphones?

EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.

Why wont both of my wireless earphones connect?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

How do you reset Bluetooth earbuds?

EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.

Why is my other earphone not working?

Diagnosis: Faulty wiring within defective earbud

Sometimes, a loose or broken wire can cause your earbuds to play only in one ear. Once you’ve determined that the issue isn’t caused by a broken or shorted wire along the cord, follow the steps below to open and fix the earbud.

Why can I only hear out of one Bluetooth earbud?

Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.

How do I force a Bluetooth device to pair?

Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.

Why won’t my headphones work on my Android?

Android settings prevent headphones from working

If they’re still not working, your headphones are the problem. If your headphones do work in another device but not in your smartphone, your phone’s the problem. Check your sound settings. … Tap on Volume and similar settings to make sure your sound settings are turned on.

Why is my Bluetooth not detected?

Make sure Airplane mode is turned off. Turn Bluetooth on and off: Select Start , then select Settings > Devices > Bluetooth & other devices . Turn off Bluetooth, wait a few seconds, then turn it back on. … In Bluetooth, select the device you’re having problems connecting to, and then select Remove device > Yes.

Why isn’t my Bluetooth working on my Android?

If the Bluetooth is not connecting android properly, you might have to clear the stored app data and cache for the Bluetooth app. … Tap on ‘Storage & cache’. You can now clear both the storage and cache data from the menu. After that, reconnect with your Bluetooth device to see if it works.

How do I put wf1000xm3 in pairing mode?

Wireless Noise Canceling Stereo HeadsetWF-1000XM3

When you pair a second or subsequent device, put the headset in both ears, then hold your fingers to the touch sensors on both the left and right units for about 7 seconds to enter pairing mode.

How do I pair my Bluetooth headset with my phone?

On an Android device, pull down the shade from the top of the phone and long-press the Bluetooth icon. It’ll bring you right to the Bluetooth menu where you can turn it on and then search for devices. Tap the name of the headphones you’re trying to pair.

How do I reset my headphone settings?

Turn off the headset, then press and hold the POWER and / buttons simultaneously for more than 7 seconds. The indicator (blue) flashes 4 times, and the headset is reset to the factory settings. All pairing information is deleted.

How do I reset my Bluetooth?

Clear Your Android Device’s Bluetooth Cache

1. Go to the Settings on your Android device.
2. Select Apps.
3. Click ⋮ to display your system apps.
4. Select Bluetooth from the list of apps, then select Storage.
5. Tap Clear Cache and exit your Settings.
6. Restart your device and try pairing it to your Reader again.

How do you put wireless headphones in pairing mode?

Make sure that the device is on. Press and hold the power button on your headphones for about 7 seconds. This will put it in pairing mode which will allow it to pair up with your device. Release the button when you see the light indicator blinking quickly (usually flashing red/green and blue).

How do I make my JLab headphones discoverable?

Go to Settings and turn on Bluetooth. In Bluetooth click “Pair new device”. When you see your JLab headphones or headset come up in the list, tap it and it should be paired with your phone.

How do I reset my headphones?

Select Device details, then select Reset now > Reset now to confirm and reset them. On an iOS device or Android device: Open the Surface Audio app, then tap Settings next to Surface Headphones. In Device Settings, tap Factory reset > Yes to confirm and reset them.

Don’t forget to share the post !

The post How do you pair left and right earbuds? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.