You should turn the knob clockwise, as far as it can go, or push the rod all the way up to open the damper. If there is a metal chain in or besides your fireplace, it means that your chimney has a top-mounted damper. If the chain is tightly attached to a hook, the damper is closed.
Perform a visual check. Using a flashlight, poke your head inside the fireplace to look up into the chimney. If you have a throat damper, you can tell if it is closed if you see a barrier above your head. If you can see up into the flue, the damper is open.
Thereof, Should damper be open or closed?
A fireplace damper should always be kept open while the fire is burning. … By leaving the damper open, heat is being lost as warm air is being pulled through a hole in your living room (the chimney) all the way up and through the roof. Pay close attention to the damper position, it’s very important.
Also to know is, How do you use a fireplace flue? – Open the fireplace damper all the way when starting a fire.
– Let the fire burn for a few minutes then adjust the damper so that it is partially closed (about half way) to see how it affects the fire.
Subsequently, question is, How do you use a flue? – Locate the flue lever before starting a fire. Some fireplaces have a lever while others will have pulley system consisting of two chains with rings on the end. …
– Determine the position of the flue damper. …
– Open the flue damper for a fire. …
– Close the flue damper when there is no fire.
Also, How does a flue work?
The chimney houses the flue, which is just the airway in which the smoke rises from the fireplace and exits through the roof. Conversely, outside air can enter through the flue into the firebox. Diving even deeper down the rabbit hole, the all important damper is located inside the flue.
How do you open the flue on a fireplace?
Using a flashlight, poke your head inside the fireplace to look up into the chimney. If you have a throat damper, you can tell if it is closed if you see a barrier above your head. If you can see up into the flue, the damper is open.
How do you know if your fireplace vent is open or closed?
Visually Check If you have a throat damper, the closed damper immediately above your head will block your vision. You should be able to reach up and touch the closed damper. If you have a top-mount damper, check for daylight at the top of the flue. If you can’t see daylight at the top, the damper is closed.
What does a flue damper do?
A flue damper is a cast iron or steel plate on a spindle fitted inside a flue system (usually in the first length of vitreous enamel flue pipe) which can be rotated by a small handle outside the flue pipe to reduce the adverse affects of a strong flue up-draught or ‘pull’.
Is a flue damper necessary?
Flue dampers are required on double door stoves when burned with doors open and screen in place. The damper then becomes your only control to slow the fire. It’s good to have one on any stove in case while loading you get a log stuck and can’t shut the door right away while you fight it.
How do I know if my fireplace flue is open or closed?
Using a flashlight, poke your head inside the fireplace to look up into the chimney. If you have a throat damper, you can tell if it is closed if you see a barrier above your head. If you can see up into the flue, the damper is open.
How does a fireplace damper work?
When open, the damper allows smoke from the fireplace (along with heat and harmful gases, such as carbon monoxide) to exit the house. During the summer or on cold winter nights when you are not using the fireplace, the damper closes in order to help maintain a comfortable indoor temperature.
How does a flue damper work?
A damper is a device located inside the flue that helps to control how quickly warm air, waste gases and smoke are released from the fireplace during a fire, while also helping to reduce the inflow of cold air from the outside while the fireplace isn’t in use.
Is a damper and flue the same thing?
The flue is simply the open middle of the chimney that the smoke goes up. Dampers are sometimes miss-called flues or flutes, but they are something entirely different than the flue. A damper is intended to shut off- either fully or partially- the chimney flue.
How do you open a flue?
Check the controls. If you have a push or lift rod, push or lift it all the way to open the damper. If there is a rotary control, you can turn it clockwise as far as it can go. If you have a top-mount damper, pull on the chain. If it can be pulled down before springing back up, the damper is open.
Should the damper be open or closed on a gas fireplace?
The damper should always be fully open before lighting a fire and when the fireplace is in use. Close it when it’s not it use. Operating the fireplace with the damper partially closed will not generate more heat. Instead, blocking the passage through the flue will result in smoke entering the home.
How do you use a flue damper?
How do you install a fireplace damper?
– Step 1 – Open the Fireplace Doors.
– Step 2 – Remove Logs and Clean Fireplace.
– Step 3 – Remove the Existing Damper.
– Step 4 – Purchase a New Damper.
– Step 5 – Install New Damper.
– Step 6 – Open Damper.
– Step 7 – Replace the Logs.
– Step 8 – Clean Up.
Don’t forget to share this post 💖
References and Further Readings :
