After the coat dries approximately 24 hours, sand the area. … When sanding use 150- 180 grit paper and always sand along the outside edge well, so that the transition between the compound and the CertainTeed drywall are smooth with no imperfections. Then sand the rest of the joint lightly in order to make smooth.
24 hours
Thereof, How much drywall mud do I need?
As a general rule, estimate 0.053 pounds of mud per square foot of drywall. So, multiply the total number of square feet by 0.053 to determine how many pounds of compound you’ll need. For example, if you are putting up 1,600 square feet of drywall, you would need: 1,600 x 0.053 = 84.8 pounds of compound.
Also to know is, How long does sheetrock 45 take to dry? Other setting times available are 20 (20-30 minutes); 45 (30-80 minutes); 210 (180-240 minutes); and 300 (240-360 minutes).
Subsequently, question is, How long do you have to wait between coats of drywall mud? 24 hours
Also, How soon can you sand drywall mud?
24 hours
How do you apply a second coat of drywall mud?
Do you have to sand after each coat of mud?
2 Answers. Yes, knock off any bumps between coats, but there’s no need to get it perfect. A screen sander on the end of a pole is the best tool for this job. And it goes without saying that you should minimize any bumps while the mud is still drying to avoid having to sand it later.
How much drywall tape do I need?
The rule of thumb is about 1 foot of drywall tape for every 2 square feet of drywall. Allow some extra for smaller projects. Commercial builders often purchase extra material such as drywall tape with the intent of using extra in future projects.
What needs to be done in between the layers of drywall mud?
Do I have to sand between coats of drywall mud?
2 Answers. Yes, knock off any bumps between coats, but there’s no need to get it perfect. A screen sander on the end of a pole is the best tool for this job. And it goes without saying that you should minimize any bumps while the mud is still drying to avoid having to sand it later.
How long does mud have to dry before sanding?
24 hours
Should I wipe down drywall after sanding?
Sanding produces a fine, white dust throughout the room. It is important to perform drywall cleaning after sanding to remove the dust before painting. Otherwise, it may interfere with paint adhesion. Additionally, the sooner you remove this dust, the less chance it has of spreading throughout the house.
How do you mix 45 minute drywall mud?
How long does the first coat of drywall mud take to dry?
about 24 hours
Do you need to sand between coats of drywall mud?
Yes, knock off any bumps between coats, but there’s no need to get it perfect. A screen sander on the end of a pole is the best tool for this job. And it goes without saying that you should minimize any bumps while the mud is still drying to avoid having to sand it later.
How long does 5 minute mud take to dry?
Basically, 5 minute on a painted surface will take 1/2 + hour for the edges to be dry…
How do you smooth drywall mud?
Rub the abrasive side of the sponge over the drywall mud with long, firm strokes. If you are sanding a seam, work on a 3-foot section at a time and sand in the direction of the seam. Rub the drywall until it begins to soften and smooth out.
Don’t forget to share this post 
References and Further Readings :