On average, running an air conditioner costs between $0.06 and $0.88 per hour.
Thereof, How many square feet will a 5 ton AC cool?
2401-3000 square feet
Also to know is, How much is a 5 ton AC? Central Air Conditioner Size AC Unit BTU AC Unit Only
—————————- ———– ————
3 Tons 36000 BTU $2,920
3.5 Tons 42000 BTU $3,550
4 Tons 48000 BTU $3,650
5 Tons 60000 BTU $3,690
Subsequently, question is, How many tons of AC do I need per square foot? 0.0016 tons
Also, How many amps does a 3 ton air conditioner draw?
What does a 5 ton air conditioner mean?
Tons is a shorthand phrase that refers to the total cooling capacity of the unit in BTU’s. A 3-, 4-, or 5-ton unit doesn’t refer to the weight of the equipment, but instead to the amount of heat the air conditioner can remove from the home in one hour.
What is the average cost of a 5 ton AC unit?
A 5.0 TON air conditioner would cost around $1,980 for the AC unit alone or a total installation cost of $3,690. See full size and cost chart below.
How much electricity does a 5 ton AC use?
An average 5-ton air conditioner (with 10 EER rating) will run on 6,000 W.
What size breaker do I need for a 5 ton air conditioner?
A 4 and 5 ton air-conditioner will likely need a circuit breaker rated 45-50 A connected with 8-10 AWG wire when supplied with 197 – 253 volts. The breaker and wire size will largely depends on the power consumption (W) of the air-conditioner.
How much does AC affect electric bill?
For example, a 900-watt air conditioner running for eight hours would consume 7.2 kWh (900 watts * 8 hours, divided by 1000). If you pay 22.8 cents per kWh, running such an air conditioner will add about $1.64 per night to your power bill, plus taxes and fees.
How many tons of AC do I need per cubic foot?
The Rule of Thumb But the general rule of thumb is to have 1 cfm per square foot of living space. So a 1600 square foot home would have 1600 CFM of cooling capacity, or a 4 ton unit. Said another way, each ton of air conditioning will keep cool 400 square feet of living space.
What size air conditioner do I need for a 3000 square foot house?
Semi-detached House square footage * Furnace Output [BTU/hr] Air Conditioner size [ton]
———————————— ———————– ————————–
up to 1500 sq ft 40,000 BTU/hr up to 2 ton
1500 to 1800 sq ft 50,000 BTU/hr 2 ton
1800 to 2200 sq ft 55,000 BTU/hr up to 2.5 ton
2200 to 3000 sq ft 60,000 BTU/hr 2.5 to 3 ton
How do you convert cubic feet to tons for air conditioning?
– Check to make sure the “cubic foot” measurement of your room or home is correct. Find the length, width and height of a room, and multiply those numbers together. …
– Multiply your cubic foot measurement by 1,027 to convert to British thermal units. …
– Divide your British thermal units number by 12,000 to convert to tons.
How many amps does a 3 ton mini split use?
Name Aura Systems 36,000 BTU 3 Ton Mini Split AC Unit 16 SEER
——– ——————————————————–
MSRP $3,049.99
Warranty 1 Year
Amps 18.5 Amps
Voltage 240v
How much does AC cost to run per hour?
Portable AC Unit (BTU) Estimated Cost Per Hour
———————————- ———————–
5,000 BTU Portable Air Conditioner Costs $0.07 per hour
How many amps does a central air conditioner draw?
15-60 amps
How many amps does a mini split use?
Typically, you will need between 15 and 45 amps per mini split. That is about 110 to 120 volts on the low end and 208 to 240 volts on the higher end. Anything that runs on amps must have a circuit to prevent amp overload. This would cause your circuit breaker to trip and your power to go out.
Don’t forget to share this post 
References and Further Readings :
