For many years, furnaces used a small and continuously burning flame known as a pilot light to ignite the burners during every heating cycle. Although pilot lights are still present in homes with older systems, most newly installed furnaces use an electronic ignition instead.
Step 1: Find the pilot light assembly. It’s usually near the bottom of the furnace and has a gas valve with on, off, and pilot settings.
Thereof, How do I know if my furnace has a pilot light?
You’re probably familiar with a standing pilot light, the little blue flame that sits in front of one of the furnace burners. If your furnace has a small round knob on the gas valve with the words OFF/ON/PILOT, you have a standing pilot ignition.
Also to know is, Does Central Heat have a pilot light? There is no pilot light to go out on a central gas heater — and no chance of gas escaping into the room — which also means you cannot ignite the burner manually. From time-to-time, the gas heater may require restarting to engage the igniter and burners. … Locate and shut off the gas valve near the furnace.
Subsequently, question is, Does my heater have a pilot light? If you have an older gas furnace, your heating unit relies on a little blue flame known as a pilot light to ensure ignition of the burners. … If your furnace has a round knob on the gas valve with the words OFF/ON/PILOT, you have what’s known as a standing pilot ignition.
Also, When did furnaces stop using pilot lights?
Newer gas furnaces (since about 2010) do not have a traditional pilot light that burns all the time. Instead they use electronic ignition systems that light only as needed. Constant flame or “standing pilot” heating systems are still fairly common in older homes, and they can still be repaired in most cases.
Do electric furnaces have a pilot light?
Although today’s standard electric furnace uses a hot surface ignition, older models often use an intermittent pilot to ignite heat. … This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
How do you relight a pilot light on a furnace?
– Find the pilot light assembly and its reset switch. The furnace’s pilot light is usually positioned at the bottom of the unit by a knob. …
– Set the reset switch to off. Turn the knob to the “Off” setting. …
– Wait a moment. …
– Relight the pilot light. …
– Observe the furnace.
What would cause a pilot light to go out on a furnace?
Thermocouple Malfunction It is positioned very close to the flame, and when lit, the pilot light tells the thermocouple to keep the gas line open. A thermocouple that is dirty or malfunctioning will often shut off your gas supply in error, causing the pilot light to go out and your furnace to stop working.
How do you light a pilot light on a furnace?
Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
Can hear your furnace click on but it does not fire up?
Most likely, your furnace is making a clicking noise and not providing heat because your furnace’s spark igniter is trying to ignite your pilot light or burners but is failing to do so. In other words, there’s an ignition system malfunction that needs to be fixed. Otherwise, your furnace won’t start.
How do you check the pilot light on a furnace?
– Remove the furnace cover panel, which should expose the burner assembly and pilot. …
– If the pilot light is out, attempt to relight it.
– If the pilot light does not light or does not stay lit, then replace the thermocouple.
– If the pilot light is burning, examine its color.
How do you light an electric furnace?
Find the ignition button: Turn your furnace back on. Most electric furnaces have an ignition button with a smaller red button next to it. Press the two buttons simultaneously. If your pilot lights, release the ignition button and hold the red button for one minute.
Should the pilot light always be on in a gas furnace?
If you have an older gas furnace, your heating unit relies on a little blue flame known as a pilot light to ensure ignition of the burners. Water heaters, gas fireplaces and old gas stoves also often have similar pilot lights. … Since the pilot light needs to remain active, your furnace is always consuming some gas.
How do you check the pilot light on a central heating system?
Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
Do I need to relight furnace after power outage?
Restarting your furnace is common after a power outage, regardless if it was a brief flicker of lights, a brown out or an outage that lasted several hours or days. There are many ways to revive your furnace if simply hitting the reset button doesn’t produce results.
How do I reset my electronic ignition furnace?
– Check the power: The power switch to your furnace should look like a light switch. Make sure it’s in the on position.
– Turn off the furnace: Turn off your furnace’s power and gas supplies. Wait several minutes for the gas to clear.
– Find the ignition button: Turn your furnace back on.
What do you do when your pilot light goes out?
– Turn off your appliance at the power switch or thermostat.
– Find the gas valve control knob and turn it to select “pilot.”
– If pilot light controls are sticky, do not apply force or use oil. …
– Press the red button while simultaneously holding a match to the pilot burner.
Don’t forget to share this post 💖
References and Further Readings :
