How to use
Table of Contents
READ ALSO
- Press Power to turn on the washing machine.
- Turn the Cycle Selector to select a cycle.
- After then, press to activate/deactivate the Bubble Soak function. ( Blue box in the image below)
- It is available with and adds up to 30 minutes to 5 cycles: COTTON, SYNTHETICS, BEDDING, DAILY WASH, BABY CARE, and DENIM.
Likewise, How do I reset my Samsung Eco Bubble washing machine?
How to reset Samsung washing machine eco bubble (steps)
- Step 1: Turn on the washing machine. You clearly simply need to press the power button to make it turn on.
- Step 2: Press the option button. Next, press the option button on the machine for about 5 seconds. …
- Step 3: Turn the dial to factory reset. …
- Step 4: Tap to reset.
Also, What is Samsung bubble soak?
The Samsung washing machine’s Eco Bubble™ technology delivers a powerful, but gentle cleaning performance even at low temperatures. … With the touch of a button Bubble Soak technology helps remove a variety of stubborn stains. Your clothes are thoroughly soaked in bubbles, so stains are loosened and removed effectively.
Moreover, How do I soak my Samsung washer?
You can soak clothes directly in the chamber of your washing machine if you plan to machine wash them afterward. All you need to do is add detergent to the water drawn into the washing machine, then let the clothes soak for 20-30 minutes in the mix of detergent and standing water.
How do I get rid of Samsung Eco Bubble?
If you need to cancel the cycle, touch Start/Pause (Hold to Start).
How do I unlock my Samsung Eco Bubble?
- Press the Start/Pause button to unlock the door.
- Open the door, then add or remove laundry.
- After closing the door, press the Start/Pause button to restart the wash. To change a cycle, you may tap the Pause button and then change the cycle.
What do you do if your Samsung washer won’t drain?
More videos on YouTube
- Turn off the washer and check the level. If the washer isn’t level it may not drain correctly. …
- Inspect the drain hose. …
- Clean the pump filter (front loaders only). …
- Turn the washer back on and start a cycle.
Do Samsung washers have a soak cycle?
Pre Soak: Adds soaking time at the start of the wash cycle for better stain removal. The amount of time added varies between models, such as 18 or 30 minutes. Pre Wash: Before the selected cycle, the washer will fill with cold water and detergent from the Pre Wash section of the detergent compartment and will tumble.
How do you soak a Samsung front load washer?
Front Loader: Is it possible to pre-program a soak interval with my washing options?
- If you would like the washing machine to pause for soaking, please press the “Start/Pause” button to pause and restart cycles.
- The wool cycle is the only cycle with a pre-programmed soak interval.
What is Samsung Q drive?
The QuickDrive itself is a reference to the QuickDrive Drum, which is said to reduce washing times by up to 50% (when compared to other Samsung models). … The AddWash is a small hatch within the door which can be used to put clothes into a wash – even if the wash has already started!
How do you soak in a front load washer?
How to Soak Clothes in a Front-Load Washer
- Place soiled clothes into the front-load washer and shut the door tightly.
- Add one-eighth to one-quarter cup of detergent to the drawer or panel at the top of the washer. …
- Program the machine for the water temperature, load size and type of load.
What is the meaning of eco wash?
A washing setting that lets you be more ecologically friendly- less water and less energy. Wash modes are always a mix of three things: temperature, time and water. With eco mode you’re using less water and a lower temperature than most settings. … That’s because heating up the water takes the most energy.
How do I manually drain my Samsung washer?
[Solution]
- 1 Unplug the washing machine from the power supply.
- 2 Open the filter-cover.
- 3 Unscrew the emergency drain cap by turning it to the left.
- 4 Grip the cap on the end of the emergency drain tube, and then slowly pull it out about 15 cm (about 6 inches).
- 5 Allow all the water to flow into a bowl.
What setting to wash towels Samsung?
Normal: The default cycle. It’s best for items such as cottons, bed linens, table linens, underwear, towels, or shirts. The washing time and the number of rinses are automatically adjusted according to the load.
Why does my Samsung washing machine take so long?
A washer that continuously takes too long to wash may have a malfunctioning load sense system, or greater problems with its control panel. There may also be issues with your water inlet valve, which pulls water into the appliance for each cycle. … Also, heating the water often takes longer in a front-loader.
Why is my washer locked and won’t open?
Turning off the machine at the mains should allow the door lock to cool down and open after a few minutes. … The most common cause is water left in machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray).
How do I force drain my Samsung washer?
[Solution]
- 1 Unplug the washing machine from the power supply.
- 2 Open the filter-cover.
- 3 Unscrew the emergency drain cap by turning it to the left.
- 4 Grip the cap on the end of the emergency drain tube, and then slowly pull it out about 15 cm (about 6 inches).
- 5 Allow all the water to flow into a bowl.
Why is my Samsung not draining?
It could be because the washer isn’t level or the drain tube is clogged or pinched. Adjust the legs of your washer, as needed, and check the drain tube for kinks or damage. Troubleshoot a Samsung washer not draining with these likely causes and straightforward solutions.
Does Spin Cycle drain water?
It removes the water from the tub during the spin cycle. The washer pump forces water from the bottom of the machine into the drain hose. The drain hose loops to the top of the machine, and then down to the drain, enabling the tub to fill. When the water reaches the bend in the hose, it goes out of the drain.
Do you add detergent to self clean Samsung washer?
To run a Self Clean cycle, make sure the washer is empty, press Self Clean, and then press Start. You don’t need to add any cleaner when running self clean. However, we do recommend using bleach if you already have an existing mold smell (see our guide for details).
How do I get my Samsung washer to spin only?
To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:
- Power the unit on.
- Press and hold the spin key for approximately 3 seconds. A chime will sound.
- Select the spin level, if desired.
- Press the Start/Pause button.
How do you pre soak clothes in a front load washer?
Most HE front loading washers do not have a soak cycle. However stopping the cycle and letting it sit overnight is perfectly fine. You can also run the cycle from 5 to 10 minutes and then pause it for a few hours to soak the load. Then you can simply turn the washer back on and let it run through the complete cycle.
How do you wash clothes in a front load washer?
How To Deep Clean Your Front-Loading Washing Machine
- Step 1 – Run a Wash Cycle With 2 Cups Vinegar. …
- Step 2 – Run a Hot Wash Cycle With 2 Cups Bleach. …
- Step 3 – Run Additional Rinse Cycle. …
- Step 4 – Clean Detergent Tray. …
- Step 5 – Clean The Door Seal And Machine Exterior.
