If your dryer won’t start when you push the start button, the most likely causes are a lack of power, a defective door switch, a blown thermal fuse or a bad start switch. … If it doesn’t turn on, it’s likely that the dryer has no power. Check your power cord and the house circuit breaker.
Table of Contents
READ ALSO
Likewise, How do you troubleshoot a dryer that won’t start?
Here are nine reasons your dryer won’t start:
- Thermal fuse. A thermal fuse is the most common dryer problem and usually due to a clogged dryer vent. …
- Start switch. It’s somewhat simple to detect if a start switch is working. …
- Door switch. …
- Drive motor. …
- Drive belt. …
- Power problems. …
- Belt switch. …
- Main control board.
Also, How do you test a dryer control board?
How to test your dryer’s rotary switch: Unplug your dryer and remove the control console panel on the top of your dryer to locate the rotary switch. Set your multi-meter to the Rx1 setting and place the probes on the switch’s terminals. You should receive a reading of infinity.
Moreover, Why is my dryer running but not heating?
Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element. If you gather your tools and follow this guide, you may be able to solve basic dryer heating problems on your own.
How do I reset my thermal fuse?
- Step 1: Locate the Fuse. Study the owner’s manual for the location of the thermal fuse. …
- Step 2: Cut Power to the Dryer. …
- Step 3: Disassemble as Needed. …
- Step 4: Disconnect the Thermal Fuse. …
- Step 5: Conduct a Continuity Test. …
- Step 6: Purchase a Replacement. …
- Step 7: Replace the Fuse. …
- Step 8: Reassemble the Dryer and Test It.
Do all tumble dryers have a reset button?
Not all tumble dryers have re-set buttons, so if it stops heating it is most likely to be because the thermostat or TOC (Thermal Overload Cutout) has tripped due to overheating. Thermostat’s are usually the size of a 5p and can be accessed by removing the back panel.
What does a dryer control board do?
A dryer’s electronic control board manages the dryer’s operations, including drying time and temperature.
How much is a thermal fuse for a dryer?
Other Costs to Fix a Dryer
| Part | Material Cost | Total Cost |
|---|---|---|
| Thermal fuse | $5-10 | $80 -$130 |
| Dryer thermostat | $3-20 | $180 |
| Bearing | $50 | $130-$250 |
| Roller | $10-30 | $90-$230 |
Why is my dryer dead?
If your dryer seems absolutely dead when you turn it on, chances are the door switch is bad or the plunger is broken or bent. … If you have a gas dryer with the lint filter in the door, access the thermal fuse by opening the bottom panel. If the filter slides into the top of the machine, remove the entire front panel.
Why is my tumble dryer not getting hot?
If your tumble dryer isn’t heating up, it’s likely that the heater may have tripped and needs to be reset. … The reset button is usually situated under the back panel of your tumble dryer, which you’ll need to remove by unscrewing it. Sometimes it may be on the back panel, so you won’t need to remove it.
Why is the dryer blowing cold air?
One of the most common reasons your tumble dryer decides to blow out cold air instead of hot is, rather ironically, because it has overheated. … If your tumble dryer does not have a reset button it is likely you will need to replace your thermostat and thermal overload cut-out (TOC).
How much does it cost to replace a thermal fuse in a dryer?
Other Costs to Fix a Dryer
| Part | Material Cost | Total Cost |
|---|---|---|
| Thermal fuse | $5-10 | $80 -$130 |
| Dryer thermostat | $3-20 | $180 |
| Bearing | $50 | $130-$250 |
| Roller | $10-30 | $90-$230 |
Will a dryer turn on if the thermal fuse is blown?
Will the dryer run if the thermal fuse is blown? Unlike a thermostat that can reset itself, once a dryer thermal fuse blows, it will need to be replaced with a new one before the dryer will run. … On electric dryers, the thermal fuse is often located on the blower housing or near the heating element.
What happens when thermal fuse blown on dryer?
A thermal fuse will blow when the temperature gets too high, not when it’s drawing too much current. … When it blows, the dryer stops generating heat. It’s necessary to replace it before the dryer will run again.
Is there a reset button on a Hotpoint dryer?
In some models this should be easily fixable – some tumble dryers have reset buttons on the back of the machine so all you will need to do is hold in the button and wait for it to click. If your dryer’s fuse is blown, you will have to replace it. …
Will dryer start if thermal fuse is blown?
Will the dryer run if the thermal fuse is blown? … While a blown thermal fuse is the most common reason a dryer won’t start, run, or heat, you should remove the fuse from the appliance and test it to determine if it has blown or not before purchasing a new one.
What’s wrong when the dryer won’t spin?
A broken drive belt is the most common reason a dryer won’t spin. … A working belt should provide some resistance, so if the drum turns very easily and loosely, the belt is probably broken. Unplug your dryer and remove the lid so you can inspect the belt to confirm that it’s broken.
How long should a dryer last?
The average clothes dryer lasts between eight and 12 years, according to Angie’s List. But the more you use that dryer, the shorter its lifespan is likely to be. Also, a higher-quality dryer is likely to outlast a cheaper model with inferior components.
Where is the fuse on a dryer?
The thermal fuse will be located somewhere by the exhaust vent on your dryer. You will be able to visually identify it by the two wires connecting to it. Removing the front of the dryer and removing the drum might be easier to access the fuse’s location.
Can you bypass dryer thermal fuse?
If you do not have access to a multimeter or ohmmeter, you can momentarily bypass the thermal fuse. … Operating a dryer with a bypassed thermal fuse is both unnecessary and unsafe, so a bypass should only be done long enough to troubleshoot a potential problem.
How do you unclog a dryer vent?
How to clean your dryer vent in 6 easy steps
- Step 1: Find your vent. Before you can clean your dryer vent, you’ll need to figure out where it actually is. …
- Step 2: Carefully disconnect your dryer. …
- Step 3: Vacuum the lint. …
- Step 4: Get in there with a brush. …
- Step 5: Clean up and reconnect. …
- Step 6: Celebrate.
How do I reset the thermostat on my tumble dryer?
If the thermostat on your tumble dryer has tripped, you may be able to reset it by pressing a reset button which will be located somewhere around the back of the appliance.
Why has my tumble dryer stopped spinning?
A broken drive belt is the most common reason a dryer won’t spin. … A working belt should provide some resistance, so if the drum turns very easily and loosely, the belt is probably broken. Unplug your dryer and remove the lid so you can inspect the belt to confirm that it’s broken.
