The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch. Connect the white grounded wire from the ceiling to the white wire from the fan.
Table of Contents
READ ALSO
Likewise, Do I connect the blue wire to the black wire?
Why Yes; you can connect if both wire are to be use for same purpose, that is if the black wire is use for neutral and you intend to use the blue wire for neutral you can connect.
Also, What color wires go together?
US, AC:The US National Electrical Code only mandates white (or grey) for the neutral power conductor and bare copper, green, or green with yellow stripe for the protective ground. In principle any other colors except these may be used for the power conductors.
Moreover, What does Blue wire mean?
Blue wire generally refers to a type of wire or cable that is added to a hardware product at a factory in order to resolve design problems. Blue wires are also known as bodge wires in British English.
What does blue wire mean?
Blue wire generally refers to a type of wire or cable that is added to a hardware product at a factory in order to resolve design problems. Blue wires are also known as bodge wires in British English.
Can you install a ceiling fan with only one light switch?
You can install a ceiling fan with a light in a room with a single light switch with a simple wiring trick. First, turn off power to the fixture at the electrical panel. … Once you label what wires in the box went to what color wires on the fixture, you can unwire the fixture and take it down.
Where do you connect the yellow wire?
Yellow wires are used as switch legs to ceiling fans, structural lights, and outlets paired with light switches, while blue wires are usually used as travelers for three-or-four-way switches.
Do red and black wires go together?
If the red and black wires are connected together already and energized, yes you can do that but you will need a pull chain light or a remote control, if they are not switch controlled.
Are red and black wires the same?
The standard way to power a split-tab outlet is to run a three-conductor cable to a wall switch. The cable has a black wire, which connects directly to the circuit, and a red wire, which connects to the switch.
Is blue wire positive or negative?
Yellow is positive, blue is negative.
Is a blue wire live or neutral?
Table of UK plug wiring colours
| Wire | Colour |
|---|---|
| Live | Brown |
| Neutral | Blue |
| Earth | Yellow and Green |
What is the purpose of the blue wire?
Blue wires are used as travelers, usually on three- or four-way switches (controlling a light from multiple locations) or as switch legs for things such as fans or lights. Yellow wires are almost always used as switch legs for outlets, fans, or lights.
What do I do with the red wire when installing a ceiling fan?
A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.
Can I wire a ceiling fan with 14 2 wire?
14-2 should be fine for what you are using it for just a fan.
Does a ceiling fan need a wall switch?
1 Answer. There’s no problem installing the fan without a switch. In many cases folks replace a switched ceiling light fixture with a fan, so the fan uses the switch that used to control the light.
Can I connect a black wire to a yellow wire?
The black hots need to stay together. You need to identify which black on the new switch is “always hot” or “line in” and connect that to these two wires with a wire nut. The yellow wire is the switched hot on the new switch – that should be the other black. Might be called “switched” or “load”.
What is the difference between white and yellow electrical wire?
For example, white sheathing means that the inner wires are 14-gauge and yellow sheathing indicates that they are 12-gauge.
What are the 3 wires in a light fixture?
A standard box will have three sets of electric wires connected. There may be the black or red current wires, the white neutral wires, and the silver or copper ground wires.
What do I do with the red wire when installing a ceiling light?
If turning the switch off turns the wire off, the red wire delivers power from the light switch.
Which wire is positive when both are black?
If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive. Look in the owner manual to determine which wires are negative in a car.
What happens if you switch black and red wires?
If you switched the wires, what would happen? Red is positive charge, black is negative charge. If you aren’t running if you aren’t connected correctly.
What do you do with the red wire when installing a light?
The exact purpose of a red wire for a light fixture can vary. Except in rare cases, it is a hot wire or a switched hot wire. Check the wire with a non-contact voltage tester with the power and switch turned on. If the tester indicates the wire is hot, turn the switch off and retest.
What wires are black and red?
Black, red, white with black or red tape will always indicate a hot wire. The term “hot” means these wires carry a live current from your electric panel to the destination.
