The Grey wire goes in the common terminal, Brown in the L1 terminal and Black goes in the L2 terminal. When ever you fasten a wire into a terminal, always give it a gentle pull to ensure it is fastened correctly.
Table of Contents
READ ALSO
Likewise, Are brown and Red wires the same?
Answered by Dave, Electrical Safety Expert
The UK changed the standard wire colours in 2004: The live Red becomes Brown. The Neutral Black becomes Blue. The Earth wires continue to be Green and yellow.
Also, What happens if you wire a light switch wrong?
If a light switch is wired up wrongly, a short circuit may takes place if you give phase and neutral to the switch terminals. Always connect neutral wire to the one terminal of the light and phase to the one terminal of the switch and off wire to the other terminal of the switch to the light other terminal.
Moreover, Is grey wire positive or negative?
Wire Colors for DC Power
The coloring is as follows: Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.
Where does blue wire go on light switch?
The faceplate of a single, one-way switch has two terminals: “L1” is the terminal to which the neutral core wire is attached – the blue wire (traditionally black, before the change). “COM” or “Common” is the terminal to which the live core wire is attached – this is the brown wire (formerly red).
Is Brown wire positive or negative?
Brown is your hot wire so you want to connect that to your building’s black wire. The blue is negative or return, so that will go to white. Green with yellow stripe is the ground and will go to the building green.
What does Brown wire mean?
Brown = Live
The brown wire has the function of carrying electricity to the appliance. If the brown wire is live and not connected to the earth or neutral wires there will be a risk of electrocution.
Which color wires go together?
US, AC:The US National Electrical Code only mandates white (or grey) for the neutral power conductor and bare copper, green, or green with yellow stripe for the protective ground. In principle any other colors except these may be used for the power conductors.
Can wiring a light switch wrong cause a fire?
A faulty light switch can make a circuit indefinitely open or closed. There’s not enough load to start a fire.
Do I have to shut off power to change a light switch?
Safety first. It’s always important to take safety precautions before working with electricity. … To do this, you will need to locate the main electrical panel and flip the main circuit breakers at the top off. When replacing an outlet receptacle or light switch it’s possible to turn off an individual circuit.
Why are there 2 black wires on light switch?
The bare or green-wrapped ground wires serve as a backup to divert the power safely away in case of an electrical fault. In most cases, two black wires will be attached to the switch’s two terminal screws. … The ground wires will be connected to each other and attached to the grounding screw on the switch.
What does a grey wire mean?
White or gray wires indicate neutral charged wires. However, neutral wires may carry power and pose a danger of electrocution if not handled properly. White and gray wires carry power back to the service panel. Both hot and neutral wires have the potential to shock and injure you if not handled properly.
What is the gray wire for?
What is a Gray Neutral Wire? The neutral wire (whether gray or white) is used to connect a conductive piece of metal (known as the neutral bus bar) to the electrical panel so that it can attract the current and distribute it throughout the facility.
What if both wires are black?
You will get a reading if one wire is hot and the other isn’t. However, if both wires are hot, the reading will be zero. … However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.
What is blue wire light switch?
The blue wire is known as the Switched Live and takes power to the light. Switched Live is only live when the switch is on (this is where it gets its name from).
Is blue wire positive or negative?
Yellow is positive, blue is negative.
Do I connect the blue wire to the black wire?
single Switch Ceiling Fan Wiring
Note that the blue wire is connected to the black fan wire so that they can both be operated by the same switch. Connect the ceiling fan blue wire to both the black fan wire and the black wire from the ceiling. … These wires are commonly green, yellow or bare copper.
Is GREY wire positive or negative?
Wire Colors for DC Power
The coloring is as follows: Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.
Is yellow wire positive or negative?
Yellow is positive, blue is negative.
Is white or brown wire positive?
Brown is your hot wire so you want to connect that to your building’s black wire. The blue is negative or return, so that will go to white.
Does blue wire go to black or red?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.
What color wires go together for a ceiling light?
Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground. Red wire is sometimes included and acts as a conductor to carry power to the light kit.
What does Blue wire mean?
Blue wire generally refers to a type of wire or cable that is added to a hardware product at a factory in order to resolve design problems. Blue wires are also known as bodge wires in British English.
Do red and black wires go together?
If the red and black wires are connected together already and energized, yes you can do that but you will need a pull chain light or a remote control, if they are not switch controlled.
