There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.
Table of Contents
READ ALSO
Likewise, Why is my Samsung Smart TV remote saying not available?
If your Samsung remote keeps saying that it is not available, turn your television set off and allow it to completely drain of power. Once this is completed, turn the TV back on and simultaneously hold down the ‘Return’ and ‘Play/Pause’ button on the remote control as the TV starts back up.
Also, Why won’t my Samsung remote change the channel?
If you cannot change channels on your Samsung smart TV, first double-check to ensure your Samsung remote is programmed with your cable box. If afterward, you have confirmed your remote and cable box are connected, you will need to reset your remote.
Moreover, Where is the reset button on my Samsung remote?
Perform a factory reset for your Samsung TV remote by holding down the “B” and “C” keys on the remote until you see the remote light flash twice. Type in the code “981” to complete the reset. The TV remote can now be reprogrammed to your TV.
How do I fix an unresponsive remote?
Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.
How do I turn my Samsung TV on without the remote?
When facing the TV, certain models have the TV Controller on back of the TV in the bottom right corner. The control stick toggles up and down as well as side to side – the menu options will appear on the TV screen when you press the center button. Long press the center button to turn the TV on or off.
Where is the pause button on Samsung TV remote?
First, press the ‘Play/Pause’ button on the remote, which is the small round button on the right, above the ‘CH’ silver button.
Why does TV remote not change channels?
Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.
Where is the menu button on my Samsung Smart TV remote?
Access the Settings menu
Press the Home button. From the Home screen, use the directional pad on your TV remote to navigate to and select Settings. From here, select and adjust your desired options.
How do I reset my Samsung TV remote?
- 1 Power On the TV, and then press the Menu button on the TV remote control. …
- 2 Select Support and then press Enter. …
- 3 Select Self Diagnosis and then press Enter on your remote control. …
- 4 Navigate through the options and select Reset, and then press Enter on your remote control.
Where is Samsung remote menu?
Access the Settings menu
Press the Home button. From the Home screen, use the directional pad on your TV remote to navigate to and select Settings. From here, select and adjust your desired options.
Why will my remote not change channels?
Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.
What do you do when your remote won’t change channels?
Remote control won’t change TV channels
- Make sure there are no obstacles between the remote and your TV.
- Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
- Make sure the batteries are installed correctly.
- Try fresh batteries.
What is the 123 button on Samsung remote?
Press the MENU/123 button on the Samsung Smart Control to display the On-Screen Remote on the TV’s screen. Use the On-Screen Remote to enter numbers and control content playback. Select buttons on the top of the screen to use the features and functions of the TV, just like a real remote.
How do I turn my TV on without a remote?
To turn on your TV without the remote, just walk over to the TV and hit the power button.
- Read through any manuals that came with your television if you still have them.
- Check if your TV has a visible touch power button. …
- Check the the left and right sides and the top of your TV, some TVs have power buttons there.
What is the source button on Samsung TV remote?
Grab your remote and hit the “Home” key. Doing this will bring up a menu bar that usually runs along the bottom of the screen. On the menu, scroll left until you get to the word “Source”. Select “Source” and it takes you to the input screen.
Can you pause a Samsung Smart TV?
It is not possible to pause live TV broadcasts on your Samsung Smart TV. This is because the TV does not have any internal storage facility.
What is a Samsung Smart remote?
Dubbed the Samsung Smart Control, the remote is based on the company’s Tizen operating system, a mobile platform it’s developed to run on everything from televisions to smartphones. …
How do I get my remote to change channels?
Remote control won’t change TV channels
- Make sure there are no obstacles between the remote and your TV.
- Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
- Make sure the batteries are installed correctly.
- Try fresh batteries.
How do I get my directv remote to change channels?
Make sure your remote is paired with your receiver.
- Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
- Press and hold MUTE and ENTER at the same time on your remote.
- The screen displays Applying IR/RF Setup. The remote is synced.
What is the smart button on Samsung remote?
What are the Smart control button functions in Samsung H Series TV? Turns the TV on/off. Press this button to use the search window.
Does a Samsung TV have a reset button?
Hold down the “Exit” button for 12 seconds if you want to point the remote control at the TV. … The TV can be reset with the “enter” button on the remote control. The unit will stop operating.
How do I get my DirecTV remote to change channels?
Make sure your remote is paired with your receiver.
- Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
- Press and hold MUTE and ENTER at the same time on your remote.
- The screen displays Applying IR/RF Setup. The remote is synced.
How do I get my spectrum remote to change channels?
If you are having trouble switching to the channel you would like to watch, just press the cable button on the remote. Then, you can simply use the +/- buttons to switch from one channel to another. You can also switch channels by using the channel numbers.
