When the DVD player says no disc, it means the sensor is not recognizing a disc in the tray. The cleaning should help solve this problem but it may persist. Try a number of different discs to see if the problem is disc-related. … If the problem persists, cleaning the lens on a reader is necessary.
similarly, How does Vaseline remove scratches from CDS?
Simply take a cotton ball and dip it in some alcohol to clean the area near the scratch. Then apply Vaseline or Petroleum Jelly to the disc. The Vaseline will fill in the scratch, hopefully making it readable again.
on the other hand, What to do if DVD is not reading?
If the disc still cannot be read, it is probably dirty, scratched, or burned in a wrong format. Then, you need to clean it, repair it, or re-burn it to see whether the DVD not playing error is fixed.
also, How do I fix my DVD drive not reading? Method 1: Rollback CD or DVD drive drivers
- Press Windows Key + R then type devmgmt. …
- Expand DVD/CD-ROM drives then right-click on your CD/DVD drive and select Properties.
- Switch to driver tab and click Roll Back Driver.
- Wait for the driver to be rolled back then close Device Manager.
- Reboot your PC to save changes.
How do you fix a DVD that won’t read?
Solution 2: Clean the dirty DVD or try a different disc
- Step 1: Clean the disc with a mild soap and warm water.
- Step 2: Dry the disc with a lint-free cloth.
- Step 3: Squeeze toothpaste on the disc.
- Step 4: Rub the toothpaste on the disc in a straight motion from the center to the outer edges.
What removes scratches from CDs?
Toothpaste can be used to repair scratches on a CD. Clean the disc with warm water, soap, and a cloth and then dry it, making sure that no lint is left behind. Squeeze toothpaste onto the disc and rub it on the disc in a straight motion from the center out to the edges.
Can scratched game discs be repaired?
Surface-level scratches can often be fixed using a substance like petroleum jelly (Vaseline) or toothpaste, though deeper scratches are impossible to fix. Keep in mind that any repairs to a scratched disc are usually temporary; you’ll most likely have to replace the disc at some point.
How do you reset a DVD player?
On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.
Why do DVD players stop working?
DVD player not working might be a sign that the disc tray, tray motor or laser is worn out. To fix any of the DVD hardware, you need to open the housing and check the inside with special tools. If you don’t know how to fix them, send the DVD player to the repair store nearby and replace the disc drive if necessary.
How do I know if my disk drive is working?
How Do I Tell If My CD Drive Is Working?
- Check Operation. Press the button to open the CD-ROM drive. The drive should open to accept a CD. …
- Check the Drive. Click “Start” on the taskbar. Click “Computer” on the right side of the Start menu. …
- Check Device Manager. Click “Start” on the taskbar. Click “Control Panel.”
How do you reset a DVD player?
On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.
How do I get my DVD to work on my TV?
How to Connect a DVD Player to a TV
- Unplug your TV and DVD player.
- Set the DVD player on a shelf near the TV. …
- Connect your DVD player with the included cables. …
- Whichever cable you use, plug one end into the DVD player, and the other into the corresponding port in the TV.
Does toothpaste really remove scratches?
Yes, toothpaste can remove minor paint scratches. … A standard toothpaste (not a gel toothpaste) has a minor grit to it which helps buff out the scratches. Typically, minor scratches are only on the clear coat over your actual paint.
Do bananas fix scratched discs?
Take a CD / DVD that has smudges and minor scratches on it. Using a circular motion, apply a freshly cut banana to it. Next, wipe it down with the banana peel (the inside). The wax from the peel will help polish and further clean the disk.
Can peanut butter fix scratched CD?
Place 1 or 2 teaspoons of peanut butter on a wash cloth and gently buff the DVD or CD. Start in the center of the disc and rub straight out to the edge. Continue this process until the entire DVD or CD is covered with a thin layer of peanut butter. Be careful not to rub in a circular motion, which can damage the disc.
Does toothpaste actually fix scratches?
Yes, toothpaste can remove minor paint scratches. … A standard toothpaste (not a gel toothpaste) has a minor grit to it which helps buff out the scratches. Typically, minor scratches are only on the clear coat over your actual paint.
How do you fix disc rot?
A disc affected by CD rot cannot be repaired, it must be replaced. Fortunately this damage is rare and the manufacturer most affected by this has stated that it will replace any such CDs.
Can you fix a scratched PS4 disc?
To repair shallow scratches on the surface of a PS4 disc, you’ll need a gritty toothpaste, a soft cloth, mild dish soap, and warm water. … Once you have rubbed the toothpaste over the whole the disc, from the center to the edge, rinse the disc in some warm water.
How do you know if your DVD player is bad?
Listen to the machine when you insert the DVD. If you hear noises in the form of a series of clicks and creak-like sounds as the lens and laser both engages and attempt to read the disc, your lens is likely still good, only dirty or otherwise having difficulty reading the disc.
How do I reset my LG DVD player?
Press the HOME button on the remote control and select Settings > OTHERS > Initialize, then press ENTER or WHEEL. 2. Choose the option you require and select Close when finished. Factory Set – You can reset the player to its original factory settings.
How do I reset my Sony DVD player without a remote?
How do I reset my Sony Blu-Ray player without a remote?
- Turn off and unplug the Blue-Ray player, let it rest for 30 seconds.
- Press and hold the open/close button on the front of the player, reconnect the power cord, then release the button.
Why is my brand new DVD not working?
Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.
Do DVD players stop working?
DVD players work by using a laser to interpret data on the disc into audio and video signals. … Luckily, it’s usually a dirty lens that impedes your DVD player’s ability to read media. Still, sometimes a lens can simply burn out and stop working, which means a replacement is in order.
Do DVD players wear out?
In short, no. Optical media like CDs and DVDs does not wear out from repeated use. It can degrade or become damaged, however. CDs and DVDs can degrade over time because their recording layers are made with a dye that is extremely photosensitive; it deteriorates when exposed to UV rays over time.
Don’t forget to share the post !