So we got creative and decided to install 1/4″ plywood on the ceiling instead of drywall and just trim it out to cover the seams. … BUT, if your ceiling is already finished with drywall, you can use a stud finder to find the joists or trusses and mark them on the drywall to screw the plywood into.
For a basic garage ceiling, drywall is a simple, cheap material option. It’s easy to nail to existing beams and can also serve as a base for other ceiling materials if you decide to upgrade. This addition to your garage ceiling, when finished and painted, can go a long way toward giving the space a completed feel.
Thereof, What can I use for garage ceiling?
For a basic garage ceiling, drywall is a simple, cheap material option. It’s easy to nail to existing beams and can also serve as a base for other ceiling materials if you decide to upgrade. This addition to your garage ceiling, when finished and painted, can go a long way toward giving the space a completed feel.
Also to know is, Can I use OSB for garage walls? OSB is a effective sheathing material for garage walls. It’s strong and durable, and it can be used as a base for nailing or stapling insulation to garage walls. OSB can be left uncovered for utilitarian bare-wall constructions, but can be primed and painted.
Subsequently, question is, How do you plank a ceiling with plywood?
Also, What kind of drywall do you use for a garage ceiling?
Drywall is the easiest and most economical covering for your garage ceiling. Use 5/8-in. -thick drywall if your trusses or rafters are spaced 24 in. apart.
What R value do I need for my garage ceiling?
Typically these will be constructed from standard 2-by-4 studs which will define the amount of insulation that you can have installed. You should be targeting an R-Value of R-13 or R-15 in these areas to properly maximize your insulation in this application.
What can I use for garage walls?
Sturdy Wood Sheathing Wood sheathing, such as plywood or oriented strandboard (OSB), represents a simple yet economical finish option for garage walls. It can be fastened directly to the wall framing using screws, yet requires none of the taping and finishing associated with drywall.
How do you attach plywood to a garage ceiling?
Lift the plywood to the ceiling using a drywall lift. Place it perpendicular across the joists. Push it into the corner, tight against the wall. Shoot 1½-inch staples, spaced 12 inches apart, through the plywood into each joist and on the blocking if applicable.
What R value do I need in attic?
Is r19 good for garage ceiling?
Insulation in your walls and ceilings slows down this heat transfer. Any good insulation material, such as fiberglass, foam board, spray foam, etc., all act to slow down heat transfer out of your home. So R19 is better insulation than R13, and R30 is better than R19.
What materials can be used for ceilings?
– Wood. Wooden ceiling boards usually look classic and natural. …
– Gypsum. Gypsum ceiling boards come in many different patterns. …
– Vinyl. Vinyl ceiling boards are light, resistant to water and moisture. …
– Fibre-cement. Fibre-cement ceiling boards are durable against weather conditions and resistant to fire.
What can I put on my ceiling instead of drywall?
While more expensive, ceiling planks are an elegant choice for your new ceiling. These planks are available in a wide array of widths, colors, and wood grain patterns. Planks often give you the option of tongue-and-groove installation and may also be surface mounted on existing ceilings.
How thick should OSB be for garage walls?
You need a thicker wall when there is a basement because it must resist the side loads. But a garage is back filled so the are no side loads. I have seen 4 inch for a garage but 6 inch is the norm for both and what most codes will want.
Can you use plywood for a ceiling?
So we got creative and decided to install 1/4″ plywood on the ceiling instead of drywall and just trim it out to cover the seams. … BUT, if your ceiling is already finished with drywall, you can use a stud finder to find the joists or trusses and mark them on the drywall to screw the plywood into.
What type of drywall is used for ceilings?
The thicker ⅝” drywall is the standard for ceilings. You don’t want to use ½” or ⅜” for ceilings, as over time it will sag downwards in between rafters. Also, ⅝” is the standard thickness for fire-resistant or fire-code drywall, commonly found in garages.
What thickness drywall should I use?
5/8-inch
What can you put over popcorn ceiling?
Popcorn ceilings should be covered with lighter materials such as paint, paneling, or planks. One option to consider is gypsum board paneling, a material that is very similar to drywall, but much lighter and easier for the ceiling to support.
Don’t forget to share this post 💖
References and Further Readings :
