Re: Vinyl soffit for ceiling – those who have tried it I have used it many times for ceilings on porches. It works well. It will sag a little if spanning 24 inches, but with your 16 inch nailers it will work very well. It is also cleanable with a pressure washer.
Thereof, How much does it cost to install soffit?
Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.
Also to know is, How do you hang a porch ceiling? Install the Hanging Hardware Drill pilot holes smaller than your eye bolts before screwing them into the center of your ceiling joists. Go ahead and attach the chains or rope to the swing and then hang each side to the ceiling hooks so that the seat is about 17-19 inches above the floor.
Subsequently, question is, What screws to use for soffit? Registered. I regularly use 5/8″ screws for soffit. They are labeled as soffit screws at the supplier, they aren’t stainless but shouldnt get wet anyway.
Also, How do you figure linear feet for soffit?
Multiply the total length by the width to obtain the area of soffit needed to fill the gap. For example, if the total eaves length is 110 feet, and the width is 2 feet, multiply 110 by 2. The result, 220 in this example, is the number of square feet of soffit required.
Can you overlap vinyl soffit?
No, you can’t overlap it successfully, so you will be relegated to using some sort of joint channel. I may have said “no” too emphatically. You can always try it to see what sort of continuation you get end to end, but it may look neater with the channel.
What is the average cost to install vinyl soffit?
The national average materials cost to install a vinyl soffit is $1.56 per linear foot, with a range between $1.24 to $1.88. The total price for labor and materials per linear foot is $6.46, coming in between $4.82 to $8.11. A typical 25 linear foot project costs $161.62, with a range of $120.46 to $202.77.7 days ago
How do you fasten aluminum soffit?
Begin installing aluminum fascia at the center of each length by pushing it up snug to the bottom of the soffit panels. Nail it, then work your way in both directions, driving nails every 16 in., placed about 1 in. from the top and bottom.
How do you overlap vinyl corners?
How do you fasten aluminum fascia?
Begin installing aluminum fascia at the center of each length by pushing it up snug to the bottom of the soffit panels. Nail it, then work your way in both directions, driving nails every 16 in., placed about 1 in. from the top and bottom.
What screws do you use for vinyl soffit?
Fastener Choices Use aluminum, galvanized steel, or other corrosion-resistant nails, staples, or screws when installing vinyl siding. Aluminum trim pieces require aluminum or stainless steel fasteners.
Can you install vinyl soffit over wood soffit?
While it is certainly feasible to install vinyl fascia and soffit over wood, you need to ensure that you are keeping in line with the local building codes. Make sure that your attic has enough ventilation before affixing your vinyl soffit over the plywood.
How do you cover patio ceilings?
How do you fix sagging vinyl soffits?
What is the best way to cut aluminum soffit?
How much vinyl soffit do I need?
Multiply the total length by the width to obtain the area of soffit needed to fill the gap. For example, if the total eaves length is 110 feet, and the width is 2 feet, multiply 110 by 2. The result, 220 in this example, is the number of square feet of soffit required.
How do you install vinyl soffit corners?
Don’t forget to share this post 
References and Further Readings :
