– Power unit down by turning off the circuit breaker(s) for one (1) minute.
– Power unit up by turning on the circuit breaker(s).
– Monitor the range or oven for one (1) minute to ensure the error code does not display again.
– Verify the range or oven operation.
Whirlpool PF – Power failure (not a failure mode) The manufacturer has assigned this error or fault code to indicate that the appliance lost power temporarily. Press CANCEL to clear the display.
Thereof, What does PF on Whirlpool oven mean?
Power failure
Also to know is, What does PF error code mean? Power Failure
Subsequently, question is, Why does my Whirlpool oven says f9? This code will most often indicate that the appliance is wired incorrectly at the home electrical supply or the hardwire connection. If your range was installed recently and is not functioning, contact a qualified electrician to verify the electrical supply.
Also, How do I reset my Whirlpool oven?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Monitor the oven/range for one (1) minute to ensure the error code does not display again.
What does f9 mean on a Whirlpool oven?
Oven Door Lock Failure
Why does my oven say f9?
An F9 error code on a General Electric (GE) oven indicates that the oven’s electronic control system has detected a problem with the automatic door lock. … The malfunction may be a jammed door lock mechanism, a pinched or broken wire, a faulty lock switch or a fault in the control board itself.
How do I fix error code f9?
– Disconnect the power and turn off the gas supply.
– Remove the screws holding the lower rear access panel in place.
– Lift the panel up and remove it.
– Note the location of the broil and bake wires connected to the valve and disconnect them.
What does it mean when your stove says f9?
An F9 error code on a General Electric (GE) oven indicates that the oven’s electronic control system has detected a problem with the automatic door lock. … The malfunction may be a jammed door lock mechanism, a pinched or broken wire, a faulty lock switch or a fault in the control board itself.
Why does my oven say locked?
Unplug the oven for 5 minutes, plug it back in, and press “Clear/Off”. This can sometimes prompt the oven’s computer to reset and release the lock button. It’s fairly common for the lock function to get stuck if the self-cleaning cycle was interrupted for any reason, like a power outage.
How do I fix the f9 code on my Whirlpool oven?
– Power unit down by turning off the circuit breaker(s) for one (1) minute.
– Power unit up by turning on the circuit breaker(s).
– Monitor the range or oven for one (1) minute to ensure the error code does not display again.
– Verify the range or oven operation.
What does f9 mean on Kenmore oven?
The F9 error code indicates a problem with the oven door lock assembly. The door lock assembly will need to be checked and replaced if defective. If the door lock assembly is okay, then the electronic oven control board will need to be replaced.
What does f9 mean on an oven?
An F9 error code on a General Electric (GE) oven indicates that the oven’s electronic control system has detected a problem with the automatic door lock. The automatic door lock mechanism prevents the oven door from being opened when the oven is set for “Clean” mode.
How do you reset a Whirlpool stove?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Monitor the oven/range for one (1) minute to ensure the error code does not display again.
How do I unlock my oven?
– Try the following to unlock the door:
– Disconnect power to range for 30 seconds. Reconnect power and see if door will unlatch.
– If door does not unlatch and you do not have food in the oven, set the oven up to clean for 1-2 hours. Wait approximately 30 minutes for the oven to cool and try to unlock the door.
Why is my Whirlpool oven not working?
If an oven won’t turn on there could be an incoming power problem. … One of the wires that supply power to the oven element or igniter might be burnt out. These wires commonly burn out near the heat source. To determine if a wire has burned out, inspect the wires leading to the element or igniter.
How do I put my Whirlpool oven in diagnostic mode?
Don’t forget to share this post 💖
References and Further Readings :
