– Locate the refrigerator power cord on the back of the appliance.
– Disconnect the power cord from the wall outlet. …
– Turn both the fridge and freezer controls to “Off” or “0” inside the fridge. …
– Adjust the fridge and freezer controls to the desired setting. …
– Allow the fridge up to one day to adjust to a stable temperature.
You can reset it to operational mode by opening the left side door, holding down the ice plus or lock button and refrigerator button together for five seconds, and it will ding as it initializes and turns on.
Thereof, Why is my refrigerator compressor not working?
If your refrigerator is clicking, or if the compressor won’t start even though you can hear the fans running, it’s possible that the overload relay is arcing or overheating. Part of the compressor circuit, the overload protects the compressor by acting as the sensor for the compressor motor windings as power comes in.
Also to know is, Why is my LG refrigerator not getting cold? A freezer that has a lot of food is a common cause for a refrigerator won’t get cold but freezer will issue. What causes it: When the freezer is overstuffed, it can block the airflow between compartments. In other words, not enough cold air will make its way to the refrigerator compartment.
Subsequently, question is, How long does it take for a new LG refrigerator to get cold? approximately 24 hours
Also, Does LG fridge have a reset button?
Most refrigerators, including the LG line of appliances, can be reset the same way. … The small item does a big job in the appliance. To reset an LG refrigerator after removing and replacing the water filter, simply press and hold the flashing button for a minimum of three seconds.
How do I reset my digital refrigerator?
Check on top of the fridge door for a small panel that can flip up. Underneath, there will be a button or a switch labelled “reset.” Pressing or flipping this switch will reset fridges with the feature.
How do I clear the error code on my LG refrigerator?
– Open the refrigerator door.
– Press and hold the REFRIGERATOR and ICE PLUS buttons at the same time.
– Hold the buttons until the control panel beeps. This takes approximately fize seconds.
– Check the temperature display panel to confirm that DEMO mode is off.
How do I reset my ice maker?
First, remove the ice bucket and the covering from the front of the ice maker. Some models have a button you will need to push to remove the ice tray and cover. Others will just require you to pull it off. Once the ice tray and covering have been removed, locate and press the ice maker reset button for about 3 seconds.
How long does it take for a new refrigerator to get cold?
24 hours
How do I know if my refrigerator compressor is not working?
The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.
Why did my LG refrigerator stop working?
If the condenser fan motor is not working properly, the refrigerator won’t cool properly. To determine if the fan motor is defective, first check the fan blade for obstructions. … The evaporator fan motor draws air over the evaporator (cooling) coils and circulates it throughout the refrigerator and freezer compartments.
What causes a ice maker to stop working?
Cause: A common cause for a clog is frozen water in the line. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
How do you reset a refrigerator?
– Locate the refrigerator power cord on the back of the appliance.
– Disconnect the power cord from the wall outlet. …
– Turn both the fridge and freezer controls to “Off” or “0” inside the fridge. …
– Adjust the fridge and freezer controls to the desired setting. …
– Allow the fridge up to one day to adjust to a stable temperature.
How do I know if my refrigerator compressor is working?
Can you use a new refrigerator immediately?
Let it stand In transit, your appliance gets shaken around, so it’s best to let everything settle before you plug it in. If it was transported upright, give it at least an hour before you plug it in. If it was transported on its side, turn it the right way up and leave it for at least four hours.
How do you fix a refrigerator compressor that doesn’t work?
Where is the reset button on my LG fridge?
You can reset it to operational mode by opening the left side door, holding down the ice plus or lock button and refrigerator button together for five seconds, and it will ding as it initializes and turns on.
Don’t forget to share this post 
References and Further Readings :
