2) Fold under 2cm at the top of the curtain panel and lightly iron. Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain.
Thereof, How do you change pencil pleat to eyelet curtains?
Converting Ready Made Pencil Pleat to Eyelets. Is the most efficient way to shorten and convert pencil pleat curtains – take off heading tape, turn curtain inside out, measure finished drop, with right sides together sew lining and face fabric together along this line.
Also to know is, How do you hang curtains with eyelets?
Subsequently, question is, What is the difference between eyelet and pencil pleat curtains? Pencil pleat curtains have pleats at the top which are tightened or loosened with strings and then hung from the curtain rod, while eyelet curtains simply have holes in the top circled with metal rings which you slide over the curtain rod.
Also, Are eyelet curtains good?
Eyelet curtains inject a chic, modern appeal to any room in which they are hung. The grommets allow the curtain to glide almost effortlessly along the rod, making opening and closing the curtains quick and easy.
Can pencil pleat curtains be changed to eyelet?
Pin the eyelet tape along the top edge of the fabric and sew into place. … Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain.
How do you remove eyelets from curtains?
How full should eyelet curtains be?
You need to allow for both flat panels to be a minimum of one and a half times the curtain pole width. I personally think they look much better at double the pole width. Give or take a couple of inches. This allows the curtains to have enough fabric to allow the pleats to look right when hanging over your window.
Can I use eyelet curtains on a track?
Curtain tracks are made from either plastic or metal and are used to hang and draw curtains that have heading tape. You can’t use eyelet curtains or tab top curtains with a curtain track. They also allow a wider range of curtain styles to be hung, including eyelet, tab top and pencil pleat.
How much fullness do you need for eyelet curtains?
For eyelet curtains you need between 1.5 times fullness (adequate) and 2.25 times fullness (maximum). You will need to make sure you have an even number of eyelets on your finished curtains.
Are curtain eyelets a standard size?
There is no standard size of curtain eyelets. You can find a variety of curtain eyelets in many sizes to suit all curtain pole diameters, which can be listed as 25mm, 40mm, 50mm, and 66mm. For example, 25mm curtains eyelets can be found in 1.7″ inch for 44mm outer diameter, and 0.4″ inch for 11mm overall length.
Are eyelet curtains fashionable?
Eyelet curtains inject a chic, modern appeal to any room in which they are hung. The grommets allow the curtain to glide almost effortlessly along the rod, making opening and closing the curtains quick and easy.
How do you remove eyelets from paper?
How do you use eyelets in paper?
Can grommets be reused?
The grommet can be reused for its appearance on the outside of the drum if it’s removed correctly. That usually involves drilling it out from the inside. You end up with the grommet looking fine in the badge on the outside, but it doesn’t hold the badge to the drum. For that you can use double sided tape.
How are eyelets measured?
Eyelet and grommet dimensions are generally measured in thousandths of inches (3 decimal places). Therefore, it is advisable to use precise measurement tools to determine Stimpson part dimensions. We recommend a caliper for all dimensions except I.D. and hole size, which should be measured using pin gauges.
What size do eyelets come in?
Size Outside Diameter (in millimeters) Inside Diameter (in millimeters)
———– ——————————— ——————————–
#00 (3/16″) 9mm 4.5mm
#0 (1/4″) 11.5mm 6mm
#1 (5/16″) 17.5mm 7mm
#2 (3/8″) 19mm 9mm
Don’t forget to share this post 
References and Further Readings :
