– Step 1: Find an Electrical Box. Electrical boxes for outlets and light switches are supposed to be attached to studs. …
– Step 2: Knock on the Wall. This one may seem old fashioned, but gently knocking your hand along the wall and listening for differences is a pretty accurate technique to find studs. …
– Step 3: Use a Magnet.
stud finder Type Rating
—————————————— ———- ——
Homder Digital stud finder Electronic 5.0
Zircon e50 studsensor Electronic 4.0
Zircon i520 center-finding multi-scanner Electronic 3.8
Franklin Sensors Prosensor 710 stud finder Electronic 4.5
Thereof, Why do stud finders not work?
1) Check Your Battery. If your stud finder worked previously, but no longer seems to work, about 9 times out of 10, the problem is a weak battery. You may swear that the battery is still good, but it’s not. … Each of these batteries has a printed expiration date, but they are all in different locations on the battery.
Also to know is, What is the best stud finder for plaster walls? Zircon MetalliScanner m40
Subsequently, question is, How do you hang something heavy on a plaster wall? Screws (and screws with masonry anchors for heavy items) are your best choice for hanging things on plaster walls without picture rail. For lighter items, simply screwing into the plaster with a 1 1/4” drywall screw is usually enough to get the job done.
Also, What is the best stud finder app?
– Stud Detector. Stud Detector is one of the best stud finder app for android users which allows you to easily ind metal framing studs. …
– Stud Find. …
– Real metal detector with sound. …
– Wall Stud Finder. …
– Stud Detector by Guylyhey. …
– Metal Detector. …
– Metal Detector. …
– Toolbox.
How much weight can you hang on a plaster wall?
Your wall will be able to take as much weight as you can hang on it. Every 12″x12″ span of 1/2″ drywall can hold 40lb in pull out load, as if you were hanging from a ceiling.
How deep do stud finders work?
about 3/4-inch
How much weight can you hang on drywall?
It’s good to have a selection of these on hand in different sizes. Large versions installed with an angled nail can support up to 20 lbs. For heavier loads (25 pounds to 50 pounds), use a flat-mounted hook and an anchor. Best for: Picture frames (up to 20 pounds) on drywall and plaster.
Can I mount a TV on plaster walls?
You most certainly can mount this on lath and plaster walls. The key is finding the studs – and honestly finding the center of the studs. The mount itself is really heavy, and then you’re putting a heavy television on the end of a long lever.
What do stud finders detect?
The earliest stud finders detected ferrous metals using compasslike pivoting magnets. Even though only commercial buildings use metal studs, magnetic stud finders, which are still available, work with wooden studs, too, by locating the metal nails used to mount the wallboard or wooden lath.
Does a stud finder app work?
Like many old-fashioned stud finders, most stud finder apps are magnetic, meaning that they simply rely on the phone’s built-in magnetometer to locate metal objects inside walls. Because wood studs are fastened with metal nails and/or screws, these applications are able to pinpoint their locations.
What anchors to use for plaster walls?
Plastic wall anchors don’t work with lath and plaster walls. Instead, use plaster anchors made of metal like a molly bolt or a toggle bolt. Be sure to use one that’s long enough to get behind the plaster and lath. When drilling into plaster, you’ll need to use a masonry bit.
What to do when you can’t find a stud in the wall?
If you cannot locate a stud, try tapping a small nail into the wall board near an existing fixture. If it meets resistance behind the wall-board then you have a stud. Wall studs should be spaced in regular intervals (usually 16″ on center in the US) so you can simply measure over to your mount area to locate them.
Do you really need a stud finder?
It is commonly thought that you need to have a stud finder in order to find a stud in your drywall. But not all homeowners own a stud finder, and probably don’t need one often enough to justify the purchase. … Most homes are built with 2×4 or 2×6 studs and studs can be found typically on the sides of windows or doors.
Why do stud finders never work?
Most magnet type stud finders don’t work effectively since they are dependent on locating the fasteners (screws) used to secure the drywall and they can be very difficult to locate.
How accurate is stud finder?
– Our pick. C.H. Hanson 03040 Magnetic Stud Finder. Durable, affordable, and accurate. Equipped with with two magnets, the C.H. …
– Runner-up. Studpop Magnetic Stud Finder. Smaller scanning area, but still great. …
– Upgrade pick. Franklin Sensors ProSensor 710. An electronic option that’s expensive, but even more efficient.
How do I turn my phone into a stud finder?
Don’t forget to share this post 
References and Further Readings :
