A garage apron is a section of asphalt or concrete that extends 2-4 feet outside of your garage door. Garage aprons act as a transition between your garage and your driveway and help to direct water away from your home.
four-inches
Thereof, What is the purpose of a driveway apron?
A driveway apron connects the driveway to the sidewalk or the main street. A well-constructed driveway apron facilitates smoother and less stressful transition from the driveway to the street.
Also to know is, What is a driveway apron? The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway.
Subsequently, question is, How wide should a driveway apron be? o The driveway, including decorative ribbons, must match the apron width at the sidewalk. o The apron must be a minimum of 10 feet wide at the property line/sidewalk and widen to12 feet at the curb line. The maximum apron width is 30 feet. o Aprons must be flared a minimum of one foot on each side.
Also, How do you build a driveway apron?
How do I make an apron driveway?
How long should a garage apron be?
about eight to 15 feet
What is the cheapest way to make a driveway?
Gravel driveways are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.
How thick should a garage apron be?
4 inches
What is a garage apron?
A garage apron is a section of asphalt or concrete that extends 2-4 feet outside of your garage door. Garage aprons act as a transition between your garage and your driveway and help to direct water away from your home.
How much does it cost to put in a driveway?
The cost to put in a new driveway averages $4,425, with a typical range between $2,379 and $6,476. For most types, you can expect to pay $2 to $15 per square foot for materials and installation. Driveway prices depend mostly on the material, which ranges from $1 to $50 per square foot, and the dimensions of the area.
How wide should a garage apron be?
o The driveway, including decorative ribbons, must match the apron width at the sidewalk. o The apron must be a minimum of 10 feet wide at the property line/sidewalk and widen to12 feet at the curb line. The maximum apron width is 30 feet. o Aprons must be flared a minimum of one foot on each side.
How do you pour an apron in a garage?
How much does it cost to pave a 2000 sq ft driveway?
Paving an asphalt driveway costs $4,719 on average, with a typical range between $2,930 and $6,559. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.
Do I need a garage apron?
Garage Apron The apron in front of the garage smooths the transition for the vehicle from the driveway into the garage and acts as a barrier to debris and moisture. The apron extends the width of the garage floor. The apron’s length depends on the required slope — more length is needed to reduce steep slopes.
How do you Slope a driveway from a garage?
Ideally, the driveway should grade away from the garage at a 2 to 5 percent pitch. Two percent calculates to one-quarter inch per foot. In many cases, it is necessary to finish the driveway with a diagonal pitch when it is not possible to slope downward and away from the garage opening.
How much does it cost to pave a long driveway?
Driveway Type Cost Per Square Foot
—————- ——————–
Gravel $.50-2
Asphalt $1-5
Concrete $3-10
Pavers or Bricks $10-50
Don’t forget to share this post 
References and Further Readings :
