22 to 24 inches
The bathroom plumbing rough-in dimensions you need to know. The bathroom sink’s water lines are roughed-in 3 inches above the drain. Measure 21 inches (approximately) above the finished floor.
Thereof, What is the rough in height for a bathroom sink drain?
Sink Drain: 18”- 20” above finished floor.
Also to know is, Do I need plumbers putty for kitchen sink drain? Increasingly, I’m finding that plumber’s putty is not recommended for sink drains, especially if it has its own rubber gasket. In places where the manufacturer does not supply a gasket (and the flange is not metal) they suggest silicone caulk. Be sure to read the directions for your drain assembly!
Subsequently, question is, How do you rough in plumbing for a sink? – Supply line (height): Two holes; vertically, both are about 2 to 3 inches above the drain pipe.
– Supply lines (horizontal): Two holes; one hole is 4 inches to the right of centerline; other is 4 inches to left of centerline.
Also, How do you rough in plumbing a bathroom?
Do I need plumbers putty for sink drain?
Some plumbers and installers favor plumber’s putty for installing drains, while others lean toward the more modern waterproof material called silicone caulk. Both plumber’s putty and silicone caulk provide a watertight seal for a sink drain.
Do I need plumbers putty for bathroom sink drain?
Increasingly, I’m finding that plumber’s putty is not recommended for sink drains, especially if it has its own rubber gasket. In places where the manufacturer does not supply a gasket (and the flange is not metal) they suggest silicone caulk. Be sure to read the directions for your drain assembly!
Is plumbers putty necessary for sink drain?
8 Answers. Increasingly, I’m finding that plumber’s putty is not recommended for sink drains, especially if it has its own rubber gasket. In places where the manufacturer does not supply a gasket (and the flange is not metal) they suggest silicone caulk. Be sure to read the directions for your drain assembly!
What is the proper rough in height for a kitchen sink drain?
2 Answers. 12 inches above the floor is really cutting it close. Most cabinets have a kick toe of 6 inches so you’d only have 6 inches to install and work the trap. I’d be looking at 16 to 18 inches above the floor.
What is rough in height for sink drains?
double bowl sinks with an extra deep side with a garbage disposer need the drain roughed in really low. rough the drain at about 13-14 inches and you’ll be set for any eventualities. … if you put them in the wall, 18 to 21 inches is fine. keep them about 8″ apart.
What is the rough in height for kitchen sink drains?
12″ will work, but it is a bit low. 18″ would be tight for a deep sink. I do mine 14″ -16″ high. As a practical matter, it is almost impossible to install it too low, unless you get ridiculous and put it at the cabinet floor, but very easy to get it too high.
How high off the floor should a bathroom sink drain be?
18”- 20”
What is height of bathroom vanity?
Traditional vanity heights in older homes range from 30 to 32 inches up from the floor. The modern trend is toward higher vanities, up to around 36 inches.
How do you rough in a bathroom plumbing?
What is the rough in height for bathroom sinks drains?
Sink Drain: 18”- 20” above finished floor.
What is included in a plumbing rough in?
A plumbing rough-in means that all water supply and drain pipes have been run through bored holes in the studs and other framing members and that all pipe connections have been made. But no sinks, faucets, or other fixtures and end elements are yet installed at this phase.
How do you rough in plumbing for a kitchen sink?
Drill 2 1/4-inch holes in the studs and floor plate, as needed, to route a 2-inch drainpipe. Keep in mind that the drain must maintain a minimum down slope of 1/4 inch per foot toward the sewer. Run a 2-inch drainpipe from the tie-in point at the larger waste line or sewer to the point you marked behind the sink.
Don’t forget to share this post 💖
References and Further Readings :