This fuse is located on the exhaust duct. If the dryer overheats, the thermal fuse opens to cut off power to the dryer. The thermal fuse cannot be reset–if the thermal fuse is open, it must be replaced.
Thereof, Are thermal fuses for dryers universal?
Thermal fuse WP3392519 shuts off the burner in a gas dryer or the motor in an electric dryer when the dryer overheats. A universal part, widely used in dryers of various brands: Whirlpool, Maytag, Kenmore, Crosley, Amana, Admiral, Estate, Roper, etc. Different from Thermostat, the Fuse is not resettable.
Also to know is, Can you reset a thermal fuse? A thermal fuse is a cutoff which uses a one-time fusible link. Unlike a thermal switch which may automatically reset itself when the temperature drops, the thermal fuse is more like an electrical fuse: a single-use device that cannot be reset and must be replaced when it fails or is triggered.
Subsequently, question is, How do you change a fuse in a Maytag dryer?
Also, Where is the fuse located on a dryer?
With a new understanding of what the dryer thermal fuse does, you might still be wondering, where is the thermal fuse on a dryer? The thermal fuse is just 1 or 2 inches long and should be located on the exhaust duct, but the location of the exhaust duct itself may differ depending on your model.
What happens when thermal fuse blown on dryer?
A thermal fuse will blow when the temperature gets too high, not when it’s drawing too much current. … When it blows, the dryer stops generating heat. It’s necessary to replace it before the dryer will run again.
How much does a thermal fuse for a dryer cost?
Part Material Cost Total Cost
—————- ————- ———-
Thermal fuse $5-10 $80-$130
Dryer thermostat $3-20 $180
Bearing $50 $130-$250
Roller $10-30 $90-$230
Does a dryer have a fuse?
Electric dryers use two household fuses or circuit breakers. The drum can still turn if just one fuse is blown, but there will be no heat. … If the dryer’s thermal fuse has blown due to a power surge or other mechanical problem, the dryer won’t heat. These fuses are easy and inexpensive to replace.
Is it worth fixing a dryer?
If a dryer is relatively new (five years or less), having it repaired can extend its life that much longer and save money in the long run. … It can be worth spending $150 – $200 to repair a midrange or high-end dryer that’s less than three years old, for example.
How do you bypass a thermal fuse?
The thermal fuse will look like a thin strip of white plastic with a wire coming out of each end. In order to bypass the thermal fuse, use electrical tape to tape the two ends together. The thermal fuse will then be bypassed. Turn the dryer on to a heat cycle for no more than 90 seconds.
Where is the dryer reset button?
You can reset it by pressing the reset button on the front of the plug. If the dryer is on a circuit shared by other GFI outlets, and one of them trips, that also could cut power to the dryer.
Do Maytag dryers have a reset button?
Maytag dryers boast several features, including a high performance motor, reduced vibration, moisture sensors, wrinkle-prevention option, variable dry for different items and fabrics, and different temperature settings. One thing that Maytag dryers do not have, however, is a reset button.
What does a dryer thermal cutoff do?
A dryer’s thermal cutoff switch controls the dryer’s temperature, and it also monitors the amount of heat it produces. If the dryer drum is spinning but is not producing heat, the thermal cutoff switch may have failed.
Will dryer start if thermal fuse is blown?
A blown thermal fuse often prevents an electric dryer from starting. You’ll find the thermal fuse on the blower housing. Unplug the dryer and check the thermal fuse for continuity. Replace the thermal fuse if the multimeter measures no continuity.
Can you bypass a thermal fuse on a dryer?
If you do not have access to an ohmeter multimeter, you can temporarily bypass the thermal fuse. Using a dryer with a thermal bypass is unnecessary and dangerous, so a bypass should only be done enough to solve a potential problem.
What would cause my dryer not to start?
Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: Problems with the door switch can prevent the dryer from starting. … A blown thermal fuse often prevents an electric dryer from starting.
Will a dryer run with a bad thermal fuse?
Can a blown thermal fuse prevent my dryer from starting? … The most likely failure is an open thermal fuse and not an open thermal cut-off. If the thermal-cut off opens it will not produce any heat, but it would run. First, I must assume that you have 220 volts of electricity supplied to the dryer.
Don’t forget to share this post 
References and Further Readings :
