Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.
SAE Wrench Size Bolt Size (SI) Metric Wrench Size
————— ————– ——————
3/8″ 3/16″ 10 mm
7/16″ 1/4″ 11 mm
1/2″ 5/16″ 13 mm
9/16″ 3/8″ 14 mm
Thereof, How do you convert SAE to Metric?
SAE to Metric Calculator The formula for that conversion is 1 mm = 1⁄25.4 inches, which is approximately 0.039″.
Also to know is, What SAE and metric sizes are the same? While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
Subsequently, question is, What is 9mm in SAE? SAE Metric Inch
—— —— —–
9mm 0.354
3/8″ 0.375
10mm 0.394
13/32″ 0.406
Also, Are metric and SAE wrenches interchangeable?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
What SAE socket is close to 18mm?
SAE Metric Inch
—— —— —–
17mm 0.669
11/16″ 0.688
18mm 0.709
23/32″ 0.719
Do cars use metric or standard?
Registered. The entire car industry is metric right now, and has been for a LONG time.
What is equivalent to a 21mm socket?
Bolt Diameter Standard Metric
————- ——– ——
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
7/8″ 22mm
What is SAE and metric?
SAE stands for Society of Automotive Engineers and the sockets are typically marked in fractions of an inch, i.e., 1/2″, 3/8″, 13/16″. Metric tools are measured in millimeters and come in sizes such as 8 mm, 10 mm, 12 mm, etc.
Do you need both metric and SAE wrenches?
As a combination wrench has a specific size that is not adjustable, trying to use the wrong wrench on a nut will go poorly. With wrenches, you also have to deal with both SAE (Society of Automotive Engineers — AKA inches) and metric sizes.
What is equivalent to a 27mm socket?
Inches Millimeters Spanner
—— ———– ———————-
1.010 9/16 Wworth; 5/8 BSF
1.024 26mm 26mm
1.063 27mm 1 1/16 AF; 27mm
1.100 5/16 Wworth; 11/16 BSF
Can you use metric on SAE?
Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.
What is equivalent to a 20 mm socket?
SAE Metric Inch
—— —— —–
20mm 0.787
13/16″ 0.813
21mm 0.827
27/32″ 0.844
Do cars use SAE anymore?
But you still need SAE sizes – you’ll find them in most US made products other than cars… virtually the entire US hardware store stock of common fasteners is SAE in hex head bolts and lag screws for example.
What is the difference between metric and standard sockets?
How do metric and standard sockets differ? … Metric socket wrenches fit fasteners where that nominal length is a round number of millimeters (8mm, 10mm, 15mm). “Standard” (often “inch” or “SAE”) socket wrenches fit fasteners where that nominal length is a round fraction of an inch (1/4″, 1/2″, 13/16″).
Do GM cars use metric or standard?
Does GM use all metric or a combination of SAE and metric? With only a few exceptions, all vehicles now use the metric system for hardware.
What is a 21mm socket in standard?
21mm. Little over 13/16 Inch. 0.82677 Inches. 22mm.
Don’t forget to share this post 
References and Further Readings :
