Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

similarly, How do I fix my TV remote sensor not working?

Follow the steps below to troubleshoot this issue:

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

on the other hand, Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

also, What do you do when your remote won’t change channels? Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

How do I fix an unresponsive remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

Can remote controls be repaired?

I have repaired a quite a few faulty remote controls and most often they are repairable. … Repairing your remote should give you more satisfaction as you get to keep the remote you are used to. Common faults are: some buttons not working, not working at all, corroded battery terminals.

Why is my Humax remote not working?

If you cannot control your Humax with it’s remote control you should check that the remote control is in PVR mode. … If either the TV, DVD or AUDIO buttons light up you need to press the PVR button once to switch the remote control to PVR mode.

Why is my Vizio TV stuck on one channel?

Press and hold the power button on the TV itself (not the remote), for 15 seconds and release. Then remove the batteries from the remote and press the power button on the remote for 10 seconds. Put the batteries back in the remote, and plug the TV back in. Turn on the set and attempt to change channels.

How do I check the remote control sensor on a TV?

You can use the TV’s stock remote control to check if the TV’s IR port is working by using the remote to turn the set on or off. The TV’s IR port works if it responds to remote commands. The TV needs to be powered for the test to work. Try installing new batteries in the remote control before testing.

How do I sync my viZio remote to my TV?

Use the following directions to program your viZio Universal remote control. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit. Find the programming code for your TV (or device) in the code list and enter it using the Number Buttons.

Can you use any remote control for a TV?

Universal remote controls are not brand specific, so you can use them with any device model from almost every electronics manufacturer. Most universal remotes work with multiple devices, so they can control your TV, cable box, and other peripherals such as DVD players and streaming devices.

Do remote controls wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

Why is my Talk Talk remote not working?

If resetting your remote hasn’t worked, try resetting your TV box. Press the ON/OFF button on the back of your TV box. Turn the box back on and press + and – buttons on the front of the box at the same time for 15 seconds.

How do I reset my Freeview remote?

URC1920: How do I reset a device on my Freeview Replacement Remote?

1. Hold the Setup key down until the LED blinks twice.
2. Press 992, the LED light will blink twice.
3. Press twice the device key to reset, the light will blink twice.

Why is my BT Remote control not working?

To reset your remote, hold down the AD, Delete SUB and BT PLAYER buttons at the same time, until the blue light flashes three times.

How do I reboot my Vizio TV?

Soft Resetting Your Vizio Smart TV

1. Unplug the TV’s power cord from its outlet.
2. Hold the power button on the TV for 3 to 5 seconds and release.
3. Reconnect the power cord and turn the TV back on.

Why is my Vizio TV not finding channels?

Make sure your source device is powered on. Make sure the cord is securely connected to your TV and Device. Cords may come loose for various reasons. It’s always good to make sure the ends are securely connected to both the TV and the device before pursuing more advanced troubleshooting.

Can the remote sensor on a TV go bad?

A remote sensor that can no longer register the IR signal from the remote control is not necessarily defective, as there are a number of things that can cause it to not see the IR signal. You can fix a remote sensor that is not registering the IR signal using a few common household items.

How do you check if the remote is working?

Check If Your Remote Control Is Working!

1. Turn your phone or digital camera on.
2. Point the remote control at the camera and press any button on the remote.
3. If you see a bluish light come from the remote when viewed through your phone or digicam display, then the remote seems to be working fine.

Where is TV button on Vizio remote?

Remove any obstacles between the remote control and the remote sensor. Replace old batteries with new batteries. Press the TV button on the top of the remote to return to the TV mode.

How do I reset my Vizio TV without a remote?

If your TV does not have a menu or your TV remote does not have a menu button, Press and hold the Input and Volume Down button (the bottom 2 buttons) on the back side of your TV. Until you get a message at the top saying ‘To Reset to Defaults, from the back panel, press the Input button for 5 seconds.

Are all Vizio remotes compatible?

If you are having trouble finding the exact remote that came with your TV, keep in mind VIZIO uses the same signals across its IR remotes. Basic functions like power, volume, channel, menu, & navigation keys will work regardless of which VIZIO remote you are using.

Don’t forget to share the post !

The post Why is my remote not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

similarly, How do I fix my TV remote sensor not working?

Follow the steps below to troubleshoot this issue:

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

on the other hand, How do I reboot my Vizio TV?

Soft Resetting Your Vizio Smart TV

1. Unplug the TV’s power cord from its outlet.
2. Hold the power button on the TV for 3 to 5 seconds and release.
3. Reconnect the power cord and turn the TV back on.

also, How do I get my Vizio TV to scan for channels? How to rescan for antenna channels on your Vizio TV

1. Press the INPUT button on your remote to view your current input source. …
2. If the TV input is not selected, press INPUT until the TV input mode is selected.
3. Open the on-screen menu and select TV or Tuner option. …
4. Highlight Tuner Mode and select the correct option:

Why is my remote not working?

1 Check the Batteries of the Supplied Remote

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

Why would a remote stop working?

There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.

Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Does a Vizio TV have a reset button?

Perform a Clear Memory or Reset to Default on the TV. Using the VIZIO remote, press the Menu button. Use the Arrow buttons on the remote to highlight System and press OK. … Highlight Reset TV to Factory Defaults and press OK.

How do I troubleshoot my Vizio Smart TV?

How to fix screen / picture / display issues

1. Unplug the power cord from the outlet or the wall (whichever is more accessible).
2. Hold the power button on the side of the TV down for 3-5 seconds.
3. Plug the TV’s power cord back in, and power on the TV.

How do you reset a Vizio TV when it wont turn on?

Power Cycle Vizio TV

1. Unplug cord of your TV from the current outlet and leave it disconnected for a few minutes.
2. Press and hold the power button (usually on the bottom left or right side) on your TV for 10 seconds.
3. Try turning on your TV again.

Which is the menu button on Vizio remote?

If you lose the remote for your TV or you realize there’s no menu button on the Vizio remote, for example, the simplest solution is to check for physical buttons on the TV itself. The buttons are located on the front of the TV toward the bottom on many Vizio, Philips and Samsung TV models.

Why is my TV not picking up any channels?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

How do I fix an unresponsive Roku remote?

To reset your Roku remote, you need to take out the batteries, unplug your Roku device and plug it back in, replace the batteries, and hold down the reset button until the remote re-pairs.

How do I fix an unresponsive remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

How long does it take for a Vizio TV to restart?

To reset the tv; Turn off wall plug , press and hold tv power on button (on the tv not on the remote!) for approx 30 sec. Leave tv unplugged for 30 minutes and then restart tv by using tv power on button.

How do I fix the black screen of death on my Vizio TV?

Check the Connections and Power

1. Turn off the television and unplug it.
2. Press and hold the TV’s power button for 30 seconds.
3. Release the power button and plug the television back in.
4. If you’re trying to test the picture from a device like a cable box, swap it out for a different device.

How long do Vizio TVs last?

What’s the Average Lifespan of a Vizio TV? Vizio TVs have an average lifespan of seven years. The actual mileage you can get from a Vizio TV depends on the usage, as overuse and high settings can contribute to the early deterioration of components.

Is there a fuse on a Vizio TV?

Locate and visually check all the fuses on the Vizio TV. There are likely five fuses.

How can I press OK without a remote?

Both volume buttons can be used at the same time. You can find the menu button on the tv, Josh Paradise. While holding the menu button on the right side of the TV, I had to press both the volume buttons at the same time.

How do I manually turn on my Vizio TV?

Press and hold the power button (located at the center) for at least three seconds, and TV will turn on or off. Vizio televisions will typically have the power buttons on the back of the TV, in the bottom right or left corners.

How do I setup my Vizio Smart TV without a remote?

Follow the steps below:

1. Download The Vizio Smartcast App for Android or Vizio Smartcast App for iOS.
2. Open the Vizio Smartcast App on either of your devices.
3. At the bottom of the Homepage, tap on the Control Button.
4. In the top right corner, click on devices. …
5. Select your Vizio Smart TV from the list of available devices.

Why is my aerial not working?

It’s very common for your TV aerial wall-plate to become faulty and ruin your TV signal. … Have a feel of your wall-plate is the connection is wobbling or is loose there is a good chance that there is a problem with the wall plate itself which could cause your TV not to work properly.

Why have I lost my ITV channels?

Freeview won’t pick up ITV: What can be done? First of all, check if there is any damage to your antenna – this is a common problem that often requires a repair. Check your equipment and cables for any damage. … If there have been updates, you should carry out another retune to your Freeview channels.

Why is my antenna not working?

One of the main reasons why your antenna is not working is that the antenna cables are not well connected. This mostly happens when someone has interfered with the connection. If you have pets in your house, then they can touch the antenna cable when running around the house, causing it to break loose from the decoder.

Don’t forget to share the post !

The post Why is my Vizio TV not finding channels? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

similarly, How do I fix an unresponsive remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

on the other hand, Why is my remote not working?

1 Check the Batteries of the Supplied Remote

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

also, Why would a remote stop working? There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.

Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Why would my remote stop working?

There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.

Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.

How do I fix an unresponsive Roku remote?

To reset your Roku remote, you need to take out the batteries, unplug your Roku device and plug it back in, replace the batteries, and hold down the reset button until the remote re-pairs.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:

1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
2. Select Remote control — Connect via Bluetooth.
3. Select Voice Remote Control — Activate button.

How do I reset my cable remote?

To perform a factory reset:

1. Press the Setup button until the LED at the top of the remote changes from red to green.
2. Press 9-8-1.
3. The LED will blink green twice to indicate that the remote was reset.

How do I resync my Roku remote?

To re-pair your remote:

1. Remove the power cable from your Roku device, wait 5 seconds and then re-connect the power cable.
2. Wait until your Roku device displays the home screen.
3. Restart your remote. …
4. Press and hold the pairing button for 5 seconds until you see the status light begin to flash.

What to do if your Roku is not working?

Restart Both Your Roku Device and Roku Remote

1. Remove the Batteries. Open the battery compartment on your Roku remote and remove the batteries.
2. Restart your Roku Device. Disconnect the power lead from your Roku device and wait five seconds before reconnecting it.
3. Reinsert the Batteries Into Your Roku Remote.

Why is my sharp Roku TV remote not working?

Reset Your Roku Remote

Remove the batteries from your Roku remote. Remove the power supply from the Roku box/stick (or go to Settings > System > System Restart > Restart if you have an IR Roku remote that’s still working). Wait 10 seconds and then reconnect your Roku box to the power.

Why is my Vizio TV stuck on one channel?

Press and hold the power button on the TV itself (not the remote), for 15 seconds and release. Then remove the batteries from the remote and press the power button on the remote for 10 seconds. Put the batteries back in the remote, and plug the TV back in. Turn on the set and attempt to change channels.

How do I sync my viZio remote to my TV?

Use the following directions to program your viZio Universal remote control. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit. Find the programming code for your TV (or device) in the code list and enter it using the Number Buttons.

Can you use any remote control for a TV?

Universal remote controls are not brand specific, so you can use them with any device model from almost every electronics manufacturer. Most universal remotes work with multiple devices, so they can control your TV, cable box, and other peripherals such as DVD players and streaming devices.

How do I check the remote control sensor on a TV?

You can use the TV’s stock remote control to check if the TV’s IR port is working by using the remote to turn the set on or off. The TV’s IR port works if it responds to remote commands. The TV needs to be powered for the test to work. Try installing new batteries in the remote control before testing.

How do I reset my optimum remote control?

For resetting the box, look for the reset button and press it for around fifteen seconds for resetting. As a result, it will reboot the box and the data will be deleted. Once the reset is complete, re-pair the remote again and it’s highly likely that the remote will work.

What if my Roku remote doesn’t have a pairing button?

To sync an IR Roku remote that doesn’t have a pairing button, make sure that nothing is blocking the signal from the remote to the device. Then try resetting the batteries or adding new batteries. Remove obstructions. Your standard IR Roku remote will only only if it’s pointed directly at your player.

How do I reset my Roku remote without the button?

To sync an IR Roku remote that doesn’t have a pairing button, make sure that nothing is blocking the signal from the remote to the device. Then try resetting the batteries or adding new batteries. Remove obstructions. Your standard IR Roku remote will only only if it’s pointed directly at your player.

How do I reboot my Roku without a remote?

How To Reset Roku Without A Remote

1. Press the physical reset button for at least 10 seconds.
2. Make sure that your streaming player is on.
3. A blinking indicator light will indicate that your device is performing a factory reboot.
4. Once there is no longer any light, your device has completed resetting.

Why did my Roku stop working?

It could be a problem with your apps or software settings, but it could also be a hardware issue if something is disconnected. Before you try any of these more complex solutions, try restarting your Roku first. Then, unplug it from power and wait a few seconds before you power it on again.

Don’t forget to share the post !

The post How do I fix my TV remote sensor not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.

1. Make sure the remote control is set properly to control the TV. …
2. Make sure there is nothing in front of the infrared (IR) sensor on the TV that may be blocking the signal from the remote control.
3. Make sure you are pointing the remote control towards the IR sensor.

similarly, How do I reset my Vizio TV without a remote?

If your TV does not have a menu or your TV remote does not have a menu button, Press and hold the Input and Volume Down button (the bottom 2 buttons) on the back side of your TV. Until you get a message at the top saying ‘To Reset to Defaults, from the back panel, press the Input button for 5 seconds.

on the other hand, Why is my remote not working?

1 Check the Batteries of the Supplied Remote

Low battery power can cause the remote to intermittently function, or not function at all. … Replace the back cover on the remote, and slide down to click it into place. If the remote fails to respond properly after this, replace the existing set of batteries with new ones.

also, Why would a remote stop working? There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.

Why won’t my remote let me change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Does a Vizio TV have a reset button?

Perform a Clear Memory or Reset to Default on the TV. Using the VIZIO remote, press the Menu button. Use the Arrow buttons on the remote to highlight System and press OK. … Highlight Reset TV to Factory Defaults and press OK.

How do I reboot my Vizio Smart TV?

Soft Resetting Your Vizio Smart TV

1. Unplug the TV’s power cord from its outlet.
2. Hold the power button on the TV for 3 to 5 seconds and release.
3. Reconnect the power cord and turn the TV back on.

How do you reset a TV without a remote?

Unplug the TV’s AC power cord from the electrical socket. Simultaneously press and hold down the Power and volume Down (-) buttons on the TV (not on the remote), and then (while holding the buttons down) plug the AC power cord back in. Continue to hold the buttons down until Erasing screen appears.

How do I fix an unresponsive Roku remote?

To reset your Roku remote, you need to take out the batteries, unplug your Roku device and plug it back in, replace the batteries, and hold down the reset button until the remote re-pairs.

How do I fix an unresponsive remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

What do you do if your TV wont change channels?

How to fix an unresponsive digital box

1. Unplug the power cable on the back of equipment.
2. Verify that the lights go out.
3. Wait 30 seconds.
4. Reconnect the power cable.
5. Test the Digital Box again. Newer boxes with a display on the front will take a few minutes to load up.

What would cause a Vizio TV not to turn on?

Here are some potential reasons why your Vizio TV won’t turn on and how to resolve them.

• Step 1: Check the Remote. …
• Step 2: Check the Vizio TV’s Power Source. …
• Step 3: Check the Condition of the Power Cord. …
• Step 4: Power Cycle Your Vizio TV. …
• Step 5: Call Vizio Customer Support. …
• Step 6: Replace Internal Components.

Can’t turn on my Vizio TV?

Most of the power-related issues can be resolved by power cycling your Vizio TV.

1. Unplug cord of your TV from the current outlet and leave it disconnected for a few minutes.
2. Press and hold the power button (usually on the bottom left or right side) on your TV for 10 seconds.
3. Try turning on your TV again.

How do I troubleshoot my Vizio TV?

How to fix screen / picture / display issues

1. Unplug the power cord from the outlet or the wall (whichever is more accessible).
2. Hold the power button on the side of the TV down for 3-5 seconds.
3. Plug the TV’s power cord back in, and power on the TV.

How do I troubleshoot my Vizio Smart TV?

How to fix screen / picture / display issues

1. Unplug the power cord from the outlet or the wall (whichever is more accessible).
2. Hold the power button on the side of the TV down for 3-5 seconds.
3. Plug the TV’s power cord back in, and power on the TV.

How do you reset a Vizio TV when it wont turn on?

Power Cycle Vizio TV

1. Unplug cord of your TV from the current outlet and leave it disconnected for a few minutes.
2. Press and hold the power button (usually on the bottom left or right side) on your TV for 10 seconds.
3. Try turning on your TV again.

How do you unfreeze a Vizio TV?

Try a reset, unplug the TV, then press and hold the power button ((on the TV set)) for 30 seconds, then release it. Then wait 10 minutes and plug the set back in, press and hold the power button again on the set until it turns on.

How do you unlock your TV?

How to Unlock a TV

1. Turn on the TV and grab the remote. …
2. Look at the screen. …
3. Unlock all of the channels on the TV by entering the factory reset code. …
4. Call the technical support service number in your owner’s manual if none of those codes work. …
5. Take your television to a TV repair shop.

How do I resync my Roku remote?

To re-pair your remote:

1. Remove the power cable from your Roku device, wait 5 seconds and then re-connect the power cable.
2. Wait until your Roku device displays the home screen.
3. Restart your remote. …
4. Press and hold the pairing button for 5 seconds until you see the status light begin to flash.

What to do if your Roku is not working?

Restart Both Your Roku Device and Roku Remote

1. Remove the Batteries. Open the battery compartment on your Roku remote and remove the batteries.
2. Restart your Roku Device. Disconnect the power lead from your Roku device and wait five seconds before reconnecting it.
3. Reinsert the Batteries Into Your Roku Remote.

Why is my sharp Roku TV remote not working?

Reset Your Roku Remote

Remove the batteries from your Roku remote. Remove the power supply from the Roku box/stick (or go to Settings > System > System Restart > Restart if you have an IR Roku remote that’s still working). Wait 10 seconds and then reconnect your Roku box to the power.

Can remote controls be repaired?

I have repaired a quite a few faulty remote controls and most often they are repairable. … Repairing your remote should give you more satisfaction as you get to keep the remote you are used to. Common faults are: some buttons not working, not working at all, corroded battery terminals.

Why is my Vizio TV stuck on one channel?

Press and hold the power button on the TV itself (not the remote), for 15 seconds and release. Then remove the batteries from the remote and press the power button on the remote for 10 seconds. Put the batteries back in the remote, and plug the TV back in. Turn on the set and attempt to change channels.

Don’t forget to share the post !

The post How do I fix my TV remote sensor not working? appeared first on True DIY : Your Number One Source for everything DIY, Crafts and handmade.