How do I turn off the air filter light on my LG refrigerator?

1 ANSWER The filter warning light can be reset by pressing, and holding, the LIGHT/FILTER button for at least 3 seconds.

Likewise, How do I troubleshoot my LG refrigerator?

The most common LG refrigerator repairs are temperature issues. Check the settings and adjust if too low or high. Check the condenser coils for dust and debris and clean with a vacuum. Make sure the condenser and evaporator fans are free of obstructions and spin freely.

Also, Where is the reset button on the LG refrigerator?

You can reset it to operational mode by opening the left side door, holding down the ice plus or lock button and refrigerator button together for five seconds, and it will ding as it initializes and turns on.

Moreover, How do you reset an air filter change indicator?

Reset the indicator by pushing the yellow reset at the end of the indicator. Another type of air filter service indicator is the Filter Minder® Single Position Service Indicator. The clear window turns red when maximum recommended restriction has been reached.

Does LG refrigerator have a reset button?

Most refrigerators, including the LG line of appliances, can be reset the same way. … The small item does a big job in the appliance. To reset an LG refrigerator after removing and replacing the water filter, simply press and hold the flashing button for a minimum of three seconds.

Where is the reset button on my ice maker?

Look for the Reset Button

To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds.

How do I clear the error code on my LG refrigerator?

Unplug the refrigerator for 2 minutes to reset the unit and allow the system to defrost again. If the error persists, the unit will require a repair service.

How do I clear the error code on my LG refrigerator?

Unplug the refrigerator for 2 minutes to reset the unit and allow the system to defrost again. If the error persists, the unit will require a repair service.

Does LG fridge have a reset button?

Most refrigerators, including the LG line of appliances, can be reset the same way. … The small item does a big job in the appliance. To reset an LG refrigerator after removing and replacing the water filter, simply press and hold the flashing button for a minimum of three seconds.

Why did my LG fridge stop cooling?

Check the Evaporator Fan Motor

Another possible cause of your LG refrigerator not cooling is a faulty evaporator fan motor. … Locate the evaporator fan motor – for refrigerators with one motor, it will be in the freezer compartment. Remove the cover and then try to turn the fan blade around manually.

Why is my air filter light on?

What the dirty air filter warning light means. This dashboard light only has one function, to warn the driver of reduced airflow into the engine. If this light comes on, you should have the air filter replaced or at least inspected.

What is a air filter restriction indicator go by to determine when the filter should be replaced?

The indicator is easy to read. As the air filter plugs, and restriction increases, the yellow position indicator moves in the clear window and locks at several points. When it reaches and locks in the red zone, the air filter should be changed and the indicator reset to zero.

Where is reset button on LG refrigerator?

To reset the control panel of an LG refrigerator, open the right door of the refrigerator, press and hold the refrigerator and ice plus buttons for 5 seconds. The control panel will beep and display temperature settings to confirm that it has been reset.

How do I force my ice maker to cycle?

How to Force an Ice Maker to Cycle

1. Open the freezer door to remove the ice bin from below the ice maker.
2. Empty the ice from the bin. …
3. Press the ice maker toggle switch to the “On” setting if it is not already activated.
4. Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.

What causes a ice maker to stop working?

Cause: A common cause for a clog is frozen water in the line. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).

Do ice makers stop making ice when full?

Samsung’s ice makers are designed to stop when they’re full. There are two methods for this: either an optical sensor or a mechanical arm, which detects when ice has piled high enough.

Why does my LG fridge say error?

For an LG refrigerator showing the If error code, this indicates that the LG refrigerator is detecting a problem with the LG refrigerator’s ice maker fan which is part of the 1F error code. This may occur when frost or ice buildup occurs around the ice maker fan.

Is there a reset button on a fridge?

Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.

What does ER 1F mean on LG refrigerator?

LG Refrigerator Error Code Er IF & LG Refrigerator Error Code Er 1F. The Er IF Error Indicates The Ice Maker Blower Fan has a Loose Wiring Connection or may be Frozen or the Ice Maker Motor is Faulty.

How do I reset my LG inverter refrigerator?

To reset the control panel of an LG refrigerator, open the right door of the refrigerator, press and hold the refrigerator and ice plus buttons for 5 seconds. The control panel will beep and display temperature settings to confirm that it has been reset.

Is there a reset button on a refrigerator?

Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.

What is the ice plus feature on my LG refrigerator?

With an “Ice Plus” feature it speeds up the freezing process and allows it to produce ice cubes about 2 times faster by directing cold air longer to the ice maker. … “Ice Plus is a function that increases both ice making and freezing capabilities.

Why is my refrigerator running but not cooling?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. … Plug in the fridge and make sure the fan runs when the compressor is running.

Why are LG compressors failing?

According to the LG refrigerator class action lawsuit, the compressor failure may be caused by a failure in the ice maker and/or fan. … According to the LG refrigerator compressor defect class action lawsuit, the compressor defect typically manifests within the first two to four years in the life of the refrigerator.