Press and hold the Extended Tumble and – (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked.
similarly, How do I reset my LG dryer?
From the home’s main, turn OFF the dryer’s circuit breaker for at least 10 seconds to clear the power surge inside the breaker. Put your dryer on power ON and run the heat test again. If the dryer is still not heating at this stage, the unit requires a repair service.
on the other hand, What does loc mean on a dryer?
The Loc Error code indicates that the Control Lock has been enabled. When the control is locked, the dryer will not start or operate. Some models will look like the following: Press and hold the Control Lock Key for 3 seconds to unlock the machine.
also, Why does my dryer say Control Lock? The “LOC” indicates the (Control Lock). This means the control panel has been locked and it will have to be unlocked before you can use the dryer. To unlock the control panel; press and release the Option and Select buttons at the same time.
How do I run a diagnostic on my LG dryer?
To run the Smart ThinQ feature:
- Open the Smart ThinQ App in your phone.
- Press the POWER to turn on the dryer.
- Place the mouthpiece of your phone very close to the POWER button.
- Press and hold the TEMP. …
- Keep the phone in place until the tone transmission has finished.
Where is the reset button on a LG electric dryer?
This switch is typically located behind the POWER/PAUSE button under the display panel. When the POWER/PAUSE button is pressed, the start switch signals the control panel to start the dryer.
Why does my Hoover dryer say Loc?
LOC means it thinks the control panel is locked. This gives the ERR indication when you push the buttons. To unlock it you need to hold down the Options and Select buttons together until it reacts.
What does E15 mean on candy tumble dryer?
Most Common Hoover Candy Tumble Dryer Error Codes and they’re meaning:
| Hoover Candy Error Code | What it means | What to do |
|---|---|---|
| E15 | Heater relay faulty (condenser models) | check heater relay and wiring check heater |
| E15 | Open front thermal overload cutout (vented models) | thermal overload cutout, wiring and connectors |
• 28 oct. 2016
How do I remove the LOC from my Whirlpool dryer?
Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.
What does LC mean on Whirlpool dryer?
If you see the “LOC”, “lc” or “LC” code on the control, the control lock has been set. Disconnect the control lock setting. If you are unsure of how to disconnect the control lock for your model, see your Owner’s Manual.
How do I turn off the control lock on my Kenmore dryer?
The control lock is turned on or off by pushing and holding the drain/spin button for 3-5 seconds.
Why does my Whirlpool dryer say Loc?
The Loc or Lc (Lock) error code indicates that The Control Lock is enabled. Touch and hold CONTROL LOCK for 3 seconds to unlock the controls of the dryer. During this time the LED Display will count down 3-2-1. When the Control Lock is disabled, the LED Display will clear.
What is wrong with my LG dryer?
One of the most common LG dryer problems is that the thermal fuse on the heater assembly blows or burns out. … Typically, you can tell that a thermal fuse is burnt out whenever the dryer isn’t getting hot at all or if it is not getting hot enough to dry clothes properly.
How do you check the moisture sensor on a LG dryer?
To test your moisture sensor, run your dryer with a few pieces of completely dry cloth. This will see that your dryer will run for about five minutes at most before it shuts off. You will also need to run a test to check the opposite function.
How do I run a diagnostic on my LG TV?
- Open the settings of the TV by pressing on the gear icon on the remote.
- Highlight or move the pointer over the All Settings option and open all settings.
- Select the Channels option.
- Move the pointer or highlight Channel Tunning.
- Press the 1 key on the remote five times quickly.
How do I troubleshoot my LG dryer?
How to Troubleshoot a LG Dryer
- Inspect the dryer vent to ensure it is clear of lint and debris. …
- Check the LG dryer power breaker at the lighting panel, when your unit will not start. …
- Inspect the inside face of the door, and remove any lint buildup around the door’s seal that may prevent it from closing completely.
Why is my dryer running but not heating?
Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element. If you gather your tools and follow this guide, you may be able to solve basic dryer heating problems on your own.
Is Synthetic a low setting on tumble dryer?
Synthetic clothing such as polyester is made of plastic, which melts in the high temperatures of a cotton drying cycle. The synthetic dry cycle is much more gentle, using slower movement and low temperatures to protect our garments.
Where is the reset button on Hoover dryer?
The re-set button is usually situated on the rear of the tumble dryer, usually on the back panel. To re-set the heat button on your tumble dryer, press in the red button.
How do I adjust the temperature on my tumble dryer?
The square with the circle inside means that the item can be tumble dried and the number of dots inside the circle indicates the temperature to be used.
- One dot – Low heat.
- Two dots – Medium heat.
- Three dots – High heat.
- Filled in – No heat.
What does E14 mean on my candy tumble dryer?
Error E14 corresponds to 14 flashes. DTC E14, as well as its equivalent signal on a typewriter without a display, indicates a failure of the heating element, temperature sensor, or control module. … We recommend starting with the simpler ones – a heating element and a temperature sensor.
What is a dryer NTC?
What is an Tumble dryer NTC Sensor? A Tumble dryer thermistor is essentially a resistor that changes its electrical resistance at varying temperatures. The name is derived from a mix of thermal and resistor. … Diagnosis is done by measuring the resistance with a continuity (or multi) meter.
How do I turn off the control lock on my GE dryer?
To lock/unlock the dryer controls, press and hold the Extended Tumble and – (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked.
What does control lock mean on Whirlpool dryer?
The dryers have a control lock feature, which prevents children from starting the dryer if they press the buttons on the control panel. The control panel is lockable whether the dryer is running or not, and when locked, all buttons are disabled.
Don’t forget to share the post !
