How do you manually unlock a Kenmore Elite washer?

How to Manually Unlock a Kenmore Front Load Washing Machine

1. Touch “Control Lock” for five seconds until “CL” disappears from the washer’s display to unlock the control panel.
2. Press “Start/Pause” to manually pause the cleaning cycle. …
3. Pull the door’s handle to open the door and add or remove the clothing from the washer.

similarly, How do you manually unlock a Kenmore Elite top load washer?

To do a quick reset, unplug your washing machine and wait five minutes. Then, plug it back in and press the Pause/Stop/Cancel button twice. If your door unlocks, then it was just a glitch.

on the other hand, Why won’t my Kenmore washer unlock?

If the washer door won’t unlock the problem might be the main control board. This is not common. Normally the problem is with the lock mechanism. Unplug the machine for 5 minutes to let it reset and then plug it back in and give it a try.

also, Why won’t my Kenmore washer turn on? First ensure that power is getting to the electrical outlet. If the electrical outlet is receiving power, but the washer won’t start, the power cord might be defective. … To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.

Why won’t my Kenmore washer drain?

If the washer won’t drain there might be a clogged pump or hose. It’s common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing.

What does CL mean on my Kenmore Elite washer?

From Kenmore elite washing Machine Code error CL, control locked?: This error code most likely indicates that the CONTROL LOCK has been activated. To deactivate the control lock press and hold the drain and spin button for 5 seconds.

How do I troubleshoot my Kenmore washer?

Kenmore Washer Troubleshooting

1. Bad lid switch. If your washing machine does not stop every time you open the lid, your lid switch is bad. …
2. Clogged waste hose. If your washing machine does not drain the waste water, the waste hose might be clogged. …
3. Bad drain pump. …
4. Bad pump motor. …
5. Broken drive belt. …
6. Bad tub motor.

Does a Kenmore washer have a reset button?

Press the “Stop” button twice, and then press the “Power” button. Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”). Press the “Start” button to complete the reset process and restart the washing machine.

How do you fix a washer that won’t start?

How to Fix a Washing Machine that Won’t Start

1. Activate the power button.
2. Test the outlet.
3. Reset outlet if necessary.
4. Make sure the power cord is plugged in.
5. Check if fuses are blown or the circuit breaker is thrown.
6. See if Delay Start has been pushed.
7. See if Control Lock has been activated.

Does a Kenmore washer have a fuse?

Your washer does NOT have a fuse in it. … Unplug the washer and plug in a hair dryer to see if the outlet works. If the hair dryer doesn’t operate check and reset the circuit breaker inside your circuit breaker box and then see if the washer or hair dryer operates.

Why is my washing machine not turning on?

Power Source

Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.

How do I force my Kenmore washer to drain?

How do you force a washer to drain?

1. STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
2. STEP 2: Locate the drain hose and water supply hoses.
3. STEP 3: Drain the washing machine of water.
4. STEP 4: Remove a drain hose clog.
5. STEP 5: Remove a drain pump clog.

How do you drain a Kenmore Elite front load washer?

How to Manually Drain Water From a Kenmore Washing Machine

1. Pull the washer away from the wall until you have enough room to access the back panel of the machine.
2. Place the bucket behind the washer next to the drain hose.
3. Unhook the drain hose from the drainpipe.

How do I turn off the control lock on my Kenmore washer?

How do you turn off control lock on a Kenmore washer? There is a control lock (child lock) that is turned on or off by pressing and holding the “Drain & Spin” button for 3-5 seconds. If the control locked light is on then holding the “Drain & Spin” button for 3-5 seconds should toggle the control lock off.

Where is the child lock button on a Kenmore Elite washer?

There is a control lock (child lock) that is turned on or off by pressing and holding the “Drain & Spin” button for 3-5 seconds.

What does it mean when your washer says CL?

CL is not an error code, but an indicator that the child lock feature is active. When the child lock feature is active, the control panel is disabled, and settings cannot be adjusted. To activate or de-activate child lock, press and hold the child lock button for 3 seconds.

How do you turn off a Kenmore washing machine?

Look for the “Pause/Cancel” button on the washer control panel. Press the “Pause/Cancel” button twice to cancel the wash cycle. Check for kinks in the water supply hose while the washer does not have power.

Does Kenmore washer have reset button?

How to Reset a Kenmore Elite HE Washer Press the “Stop” button twice, and then press the “Power” button. Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”). Press the “Start” button to complete the reset process and restart the washing machine.

Is there a reset button on Kenmore washer?

Plug the power cord into the wall outlet or turn the breaker back on and wait 30 seconds. Press the Pause / Cancel / Stop button twice to clear the display.

How do you fix a Kenmore washer that won’t drain?

What to Do When Your Washing Machine Won’t Drain

1. Perform a Master Reset. Unplug your washer for about one minute. …
2. Test the Lid Switch Assembly. …
3. See if the Drain Hose is Kinked. …
4. Check the Drain Hose or Pump for Clogs. …
5. Clean out the Coin Trap. …
6. Check the Water Level Control. …
7. Schedule Washing Machine Repair.

How do I run diagnostics on my Kenmore Elite washer?

Select “Drain/Spin” or “No Spin” by pressing the SPIN SPEED button. Within 5 seconds, push the “Prewash” option four times. The diagnostic should begin when C:00 light up.

How do I reset my Kenmore top load washer?

To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.

How do I clear the error code on my Kenmore washer?

You will need to remove the power supply to the washer to reset the code.

1. Look for the “Pause/Cancel” button on the washer control panel. …
2. Press the “Pause/Cancel” button twice to cancel the wash cycle. …
3. Connect the water supply hoses back to the washer and turn on the water spigots.

Don’t forget to share the post !