Although there are upfront costs associated with replacing wood soffits with vinyl, it’s likely you’ll dramatically reduce future repair expenses. Also, long-term maintenance costs typically go down when you replace wood soffits with vinyl.
While it is certainly feasible to install vinyl fascia and soffit over wood, you need to ensure that you are keeping in line with the local building codes. Make sure that your attic has enough ventilation before affixing your vinyl soffit over the plywood.
Thereof, Can I use plywood for soffit?
Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.
Also to know is, How do you install siding and soffit?
Subsequently, question is, How do you install soffit and fascia boards?
Also, What is the best material for soffits?
– Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. …
– Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. …
– Aluminum. Aluminum is another material that’s been around for decades as a covering for the exterior of houses. …
– Fiber Cement.
How do you install vinyl siding and soffit?
Can you put new soffit over old?
If the existing wood is in good shape, then it is safe to cover it with aluminum or vinyl material. … In simple terms, it is not necessary to remove the old soffits as long as they are in good shape and proper allowance is made for air circulation and ventilation.
What material is used for the soffit and fascia?
While soffits and fascia are traditionally constructed from materials like aluminum and wood, many homeowners are now choosing ones made from synthetic and composite materials like UPVC and vinyl because they offer easy maintenance and durability.
How thick should soffits be?
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar.
How do you replace vinyl soffit on wood?
– Step 1 – Remove the Wood Soffit. Locate the nails securing the wooden soffit material to the attic, the wall or the fascia. …
– Step 2 – Measure the Entire Soffit Area. …
– Step 3 – Install the Receiving Channel. …
– Step 4 – Install the Soffit. …
– Step 5 – Install the Trim.
Do you install soffit before siding?
The Best Installation Approach Most experts recommend installing the soffit first. You will want to calculate distance, determine how many siding rows will be needed, and then slice the top of the trim board to ensure everything is even.
How do you fix sagging vinyl soffits?
Will vinyl soffit sag?
A 14″ or 12″ spacing will provide a lot more support for the soffit to reduce sagging between fasteners. There will always be some slight bit of sag though which is unavoidable with vinyl but if installed properly it’s not bad.
Can you overlap vinyl soffit?
No, you can’t overlap it successfully, so you will be relegated to using some sort of joint channel. I may have said “no” too emphatically. You can always try it to see what sort of continuation you get end to end, but it may look neater with the channel.
How much does it cost to replace soffits?
Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.
What goes on first fascia or soffit?
The job goes smoother when you follow the correct installation sequence. First nail up the J-channel, then soffit panels, then fascia, then drip edge.
How do you install soffit and fascia vinyl siding?
Don’t forget to share this post 
References and Further Readings :
