It can be reset by switching the main ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on. If you need to continuously reset the heater, unplug the unit and call your local dealer. The fireplace is supplied with a radio frequency remote control.
The breaker may have tripped or the fuse has not blown. Check to make sure power is present at the main on/off switch on your unit. If there is power at the switch but no power elsewhere in the unit then you may need to change the switch. Check for loose or disconnected wires in unit.
Thereof, How do you troubleshoot an electric fireplace?
– Check the Power. Because electric portable fireplaces run off electricity, the first place to check is in the power supply when the unit is not working. …
– Check the Breaker. Some electrical fireplaces require more power than a standard appliance. …
– Check the Lightbulb. …
– Check Fuses. …
– Clean the Fan. …
– Check Your Model’s Manual.
Also to know is, How do I reset my electric fireplace? SOLUTION: Turn all switches to the “off” position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.
Subsequently, question is, How does a Dimplex Opti Myst fire work? Dimplex Opti-Myst fireplaces use an ultrasonic technology that was adapted from commercial applications. This feature creates an ultra-fine water mist that is illuminated by the Opti-Flame Effect. LED lighting projects 3D flickering flames while the Opti-Myst Effect produces life-like smoke.
Also, How do I program my Dimplex fireplace remote?
Press and hold the Manual Selection Switch for five (5) seconds (“_ ” position) UNTIL the second Red Indicator Light flashes. 5. Press the ON button on the remote control transmitter. This will synchronize the remote control transmitter and receiver.
Why has my electric fire stopped working?
When a wire comes loose or the motor stops functioning, the flame will freeze. Check the wiring to make sure that all connections have good contact. Look for exposed and frayed wires. If everything looks good, it’s probably time to replace your flame motor.
Are Opti Myst fires any good?
Dimplex Optimyst units are currently some of the best and most popular electric fireplaces on the market. And for good reason. They’re fairly pricey; however, when you consider what you’d be spending on maintaining a traditional fireplace, a Dimplex Optimyst model might end up cheaper in the long run.
Why does my electric fireplace not turn on?
Electric Fireplace Won’t Turn On Now, check for faulty wiring. Some electric fireplaces have a built-in fuse box (refer to owner’s manual). Replace any burnt out fuses if applicable. When the remote doesn’t work (and the batteries aren’t dead of course), the problem usually lies with the circuit board.
How do you fix a noisy electric fireplace?
Turn off the heater and only operate the fireplace flames. If you hear excessive grinding, replace the flame motor. If you hear a buzzing noise, replace the flame speed control, if applicable. Turn on the heater if the flame motor does not create excessive noise.
Why is my Opti Myst Fire not working?
The lights are not coming on when I turn on my Optimyst -If one of the lamps supplied with the fire is not working check that it is fitted correctly. If it still does not work then the lamp may have failed. … -If all lights are not coming on, first, check that the lamps supplied with the fire are fitted correctly.
Do all electric fireplaces have fuses?
Electric portable fireplaces have fuses in them that must be functional for the fireplace to heat properly. If the fireplace has lost its ability to heat, check the fuses to see if they are burned out before replacing pricier parts or the whole unit. The fuses are inexpensive and easy to replace.
How do Opti Myst fires work?
Dimplex Opti-Myst fireplaces use an ultrasonic technology that was adapted from commercial applications. This feature creates an ultra-fine water mist that is illuminated by the Opti-Flame Effect. LED lighting projects 3D flickering flames while the Opti-Myst Effect produces life-like smoke.
How do you fix a noisy fireplace fan?
– Step 1: Identify the fireplace air blower. Tilt out the bottom grille and shine a light inside the unit. Then snap a digital photo of the blower assembly.
– Step 2: Remove the old fireplace air blower. Photo 1: Remove the front panel.
– Step 3: Test and adjust. Turn on the power and fire up the burners.
How do I fix the flame on my electric fireplace?
How do you turn off a fake fireplace?
– Turn off the high heat setting switch.
– Turn off the low heat setting switch (this turns the heat off).
– Turn off the main power switch on the electric fireplace (this also turns the flames off).
– Turn off the switch on the wall socket.
– Remove the power cable from the wall socket.
How do you turn on an electric fireplace?
To get the flames to work on an electric fireplace, simply turn on the flame effect switch.
Why is my electric fire blowing cold air?
An electric heater that blows cold air could be caused by one or more of the following reasons: The manual reset has tripped. The fan switch is “on” and the thermostat setting is below the actual temperature. The fan is dispersing this air after shutdown.
Don’t forget to share this post 💖
References and Further Readings :